My cisco vpn no longer works with Lion

After installing Lion, my cisco vpn no longer works. If I force boot in 32 bit mode it works fine, so appears to be a cisco client issue. Does anyone know if CISCO is working on 64bit client compatible with Lion?

Not sure this answer helps me or anyone else. My VPN connection no longer works in Lion. How do I re-set the parameters of my VPN connection to work in Lion?
Below is what my VPN screen look like:

Similar Messages

Cisco VPN no longer works with the E4200

VPN issue with the E4200. Validated that VPN passthrough is enabled. Using Cisco VPN as the client. Used to work prior to the firmware upgrade so not sure what has changed. Error code on the Cisco VPN client is "Secure VPN connection terminated by local client. Reason 414. Failed to establish a TCP connection."
Any help would be appreciated.

Hi all,
i just had time to to a network capture
The ip have been changed but btw :
- 172.20.10.2 = A computer conntect to internet that will try to reach the vpn server behind the E4200
- 77.56.226.107 = The internet valid ip address of the Linksys E4200 router.
So below is the proof that GRE protocol is not forwarded/passing the router.
Frames 29/30/31 : Standard TCP/IP communication intialization. SYN, SNY ACK, ACK....
Frames 32/34/36/37/38/39 : initialization of pp2p using port 1723
Frame 43 : ACK of 39
Frames 40,52,67,80... Request send using protocol 47 GRE... and the server not responding as the router blocks them...
No.
Time
Source
Destination
Protocol
Length
Info
28
7.122278
138.188.101.189
172.20.10.2
DNS
198
Standard query response A 77.56.226.107
29
7.141732
172.20.10.2
77.56.226.107
TCP
62
49395 > pptp [SYN] Seq=0 Win=8192 Len=0 MSS=1460 SACK_PERM=1
30
7.217517
77.56.226.107
172.20.10.2
TCP
62
pptp > 49395 [SYN, ACK] Seq=0 Ack=1 Win=5840 Len=0 MSS=1380 SACK_PERM=1
31
7.217835
172.20.10.2
77.56.226.107
TCP
54
49395 > pptp [ACK] Seq=1 Ack=1 Win=16560 Len=0
32
7.221922
172.20.10.2
77.56.226.107
PPTP
210
Start-Control-Connection-Request
34
7.294936
77.56.226.107
172.20.10.2
TCP
54
pptp > 49395 [ACK] Seq=1 Ack=157 Win=6432 Len=0
36
7.351526
77.56.226.107
172.20.10.2
PPTP
210
Start-Control-Connection-Reply
37
7.351622
172.20.10.2
77.56.226.107
PPTP
222
Outgoing-Call-Request
38
7.428474
77.56.226.107
172.20.10.2
PPTP
86
Outgoing-Call-Reply
39
7.445873
172.20.10.2
77.56.226.107
PPTP
78
Set-Link-Info
40
7.453787
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
43
7.549399
77.56.226.107
172.20.10.2
TCP
54
pptp > 49395 [ACK] Seq=189 Ack=349 Win=7504 Len=0
52
9.469811
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
67
12.511434
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
80
16.567525
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
81
20.623443
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
83
24.679479
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
85
28.735523
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
86
32.791514
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
87
36.847452
172.20.10.2
77.56.226.107
GRE
71
Encapsulated PPP
88
37.797042
77.56.226.107
172.20.10.2
TCP
54
pptp > 49395 [FIN, ACK] Seq=189 Ack=349 Win=7504 Len=0
89
37.797165
172.20.10.2
77.56.226.107
TCP
54
49395 > pptp [ACK] Seq=349 Ack=190 Win=16372 Len=0
90
37.801537
172.20.10.2
77.56.226.107
TCP
54
49395 > pptp [FIN, ACK] Seq=349 Ack=190 Win=16372 Len=0
93
37.876767
77.56.226.107
172.20.10.2
TCP
54
pptp > 49395 [ACK] Seq=190 Ack=350 Win=7504 Len=0

My Quicken no longer works with Lion. Any suggestions?

My Qucken no longer works now that I have installed Lion. Any suggestions?

Visit Intuit for their solutions or find another application that works with Lion of which there are many. Quicken is supposed to be upgraded this year for Lion, but that's only the rumor.
You can also downgrade back to Snow Leopard or partition the drive and install Snow Leopard on a different partition provided you can install Snow Leopard on your Mac model
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Surf stick no longer working with Lion

Hi all,
first time I had a bad experience with apple products:
I have installed Lion straight away and unfortunately my 3G USB surfstick is no longer working. I have the T-Mobile Internet Manager 03 and no connection is available at all.
Seems it has something to do with the Novamedia Disk Suppressor. No longer supported???

Well, heck.
I am so sorry you guys couldn't get through to me. you can email, [email protected] anytime for full support.
On the issue of Lion, and the XLR8 devices?
Apple did change a number of items, that limited the XtraView's ability (this is the one, with the built-in audio on the older 2820 chipset). Audio, just won't work in 64-bit mode.
The easy workarounds are to boot into 32-bit mode (hit 3 and 2) on boot.
To check if you are in 64 bit mode, go to the System Profiler (Apple Menu > More Info > Software (left pane) and see if the 64 bit is loaded.
If in 32-bit mode you are still having an issue, please check that you are running XLR8 version 1.4.6. You can download new versions at http://XLR8.com.
You can email XLR8 for a free audio cable (Mac sound jack to RCA audio), or for $25, XLR8 can upgrade you to the new 2860 device that works in 64-bit mode.
Now, that hopefully, we have you working again... about Daystar. Actually XLR8 has always developed, built and shipped the devices. Daystar just had a bigger name and was an Apple Authorized Reseller. But, the Apple relationship ended, and Daystar closed.
XLR8, LLC will continue to support the devices and we will continue to provide great products and good support (sorry, we are a small company, and due to limited time... I can only provide "good" support. Maybe one day, it will be great.)
We are expanding the website at XLR8.com. You are always welcome to provide feedback and suggestions.
Oh, and lastly, thanks to Thiago, for sending me an email, and alerting me to the thread...
Gary,
XLR8
[email protected]

Dashcode no longer works with Lion

Snow Leopard 64 with Dashcode - no problems.
Updated to Lion - Dashcode now no longer works.
Any ideas people?

Found the 3.2 but wont works!
I've extract and copied the 3.2 Simulator SDK right alongside the 4.3 (Path where I copied the 3.2 folder: Developer, Platforms, iPhoneSimulator.platform, Developer, SDKs), but won't works! Now I have in Dashcode the option to switch to 3.2 (Ipad) but an error occurres when the ipad try to open: "The simulator can't find the SDK KIT. You need to reinstall it." :-(

Cisco VPN no longer works - on 2 machines

Hello all -
I had been successfully running Cisco VPN 4.9.01 (0030) to connect to my work computer from 2 Macs at home after freshly installing Leopard on both of them, but now I cannot connect from either Mac. I also tried installing 4.9.01 (0080) but run in to the same problem. As far as I can tell, it stopped working on Wednesday night or Thursday morning - but I don't recall any software updates that might have caused the problem. My IT people assure me that it should work...
Anyone having a similar issue?
Thanks in advance!
Justin

The issue was with my tech department after all...

Video capture no longer working with Lion

Does anyone know why USB video capture (XLR8 USB 2.0) would no longer capture audio with Lion. It worked great at importing old VHS home movies to my Mac before the upgrade to Lion and now, while I can still see the video, I no longer hear audio. Anyone have any ideas?

Well, heck.
I am so sorry you guys couldn't get through to me. you can email, [email protected] anytime for full support.
On the issue of Lion, and the XLR8 devices?
Apple did change a number of items, that limited the XtraView's ability (this is the one, with the built-in audio on the older 2820 chipset). Audio, just won't work in 64-bit mode.
The easy workarounds are to boot into 32-bit mode (hit 3 and 2) on boot.
To check if you are in 64 bit mode, go to the System Profiler (Apple Menu > More Info > Software (left pane) and see if the 64 bit is loaded.
If in 32-bit mode you are still having an issue, please check that you are running XLR8 version 1.4.6. You can download new versions at http://XLR8.com.
You can email XLR8 for a free audio cable (Mac sound jack to RCA audio), or for $25, XLR8 can upgrade you to the new 2860 device that works in 64-bit mode.
Now, that hopefully, we have you working again... about Daystar. Actually XLR8 has always developed, built and shipped the devices. Daystar just had a bigger name and was an Apple Authorized Reseller. But, the Apple relationship ended, and Daystar closed.
XLR8, LLC will continue to support the devices and we will continue to provide great products and good support (sorry, we are a small company, and due to limited time... I can only provide "good" support. Maybe one day, it will be great.)
We are expanding the website at XLR8.com. You are always welcome to provide feedback and suggestions.
Oh, and lastly, thanks to Thiago, for sending me an email, and alerting me to the thread...
Gary,
XLR8
[email protected]

Cisco VPN no longer working after firmware update

I have been using the Cisco VPN network connection to access work; after the recent update, both my Macs stopped working -- no changes have been made.
Is this a known bug? I looked at the settings, verified everything with no luck.
Thanks.

See http://discussions.apple.com/thread.jspa?messageID=12800407&tstart=0. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

My photoshop no longer works with lion, any solutions?

my photoshop and microsoft office no longer works since i upgraded to lion, and suggestions plz?

Lion doesn't support Rosetta PPC based programs, you either need to FIRST check with your third party software before upgrading a operating system or have a easy means to revert to a earlier OS version.
You can look though my extensive post here and find various ways to go back to Snow etc.
https://discussions.apple.com/message/16276201#16276201

Home Sharing in iTunes no longer working with Lion....

Anyone else having this problem?? I have not seen it as a topic.
We have 2007 iMacs so chips do not support Air Drop. However, I would not think Air Drop would be required for home sharing in iTunes.
Moving to Lion has not been a very good experience for me so far with peripherals, but to lose home sharing in iTunes on top of it... I don't even want to finish this sentence.

I just discovered that after the iTunes update and the Lion update, my iTunes wouldn't update anything except what was in the library already. New songs, apps, movies all equaled bupkiss. I went into advanced settings and saw that my library location was blank. I'm using an external drive for my music. So there's a bug, since it would play everything thing in the library but was unsure where the library was so that it could write to it. I just relocated my media drive and now sharing and updating the library works fine.

Keychain passwords no longer work with lion

When browsing after upgrading to Lion, many of my passwords don't work any more. When resetting a password for a site, I usually get a dialogue box to the effect "that password has been used recently, please select another." The next time I log into the same site, I'm likely as not to get the same message "password incorrect," and must reset to a new password. It gets old, and keeping track of the new passwords is a hassle. I believe (but don't know) that key chain is responsible, but ...
Any ideas?

Had the exact same issue with my mini. I just reset the keychain. Basically removing all keychaines or saved passwords and starting over with having saved passwords for websites and system applications. If you go to Keychain Access in your Application's utility folder (easy: spotlight search keychain) then select File in the Menu Bar and then Delete Keychain. Those alerts for passwords will now go away.
**Added Note** This will delete all saved passwords. You just have to save them by entering them again.
Hope this helps.

HT3775 AVI Home Video no Longer Works with Lion

Hi Everybody,
I have quite a few hours of AVI files (family footage dating back to early 70's transfered to avi from Super-8). This worked before I updated to Lion. Now I get the message "The document xxxxxxxx.avi” could not be opened. A required codec isn't available."
I don't understand why this now doesn't work. When I click on "Tell Me More" option avi is one of the files listed for Quicktime so...
Can anyone help with this?
Cheers

As Ogelthorpe above mentioned, the Free VLC Player works fine for that:
http://vlc-media-player.en.softonic.com/mac

Microsoft Word No Longer Works With Lion?

It says something like "You can't open Microsoft Word Because Power PC Applications are no longer supported."
This just happened after updating to Lion. Is there anything I can do?
DC

Return to Mac OS X 10.6.8, or upgrade Office to 2008 or better, or use a third-party product such as OpenOffice, or run Mac OS X Server 10.5 or 10.6 through a program such as VirtualBox.
(63825)

VPN no longer working after upgrade to Mountain Lion

After upgrading to Snow Leopard, the Cisco VPN client stopped working.   This was due to the fact it ran in 64-bit, but SL allowed you to switch to 32bit which then the app still worked.
You also had the choice of using the MacOS 'VPN' program, but it always disconnected quite often for me.
After the upgrade, the Cisco VPN client no longer works at all, I assume again due to the fact 32bit is no longer around, however the Mac VPN client no longer works either. It will connect, however no traffic goes over the VPN (it gets blackholed) rendering it useless.
I have this behavior on multiple Macs, so I'm not sure if this is a known issue, or if the Mac VPN client no longer plays nice with the Cisco ASA firewalls?

It appears that ML no longer supports 32bit applications at all.
Therefore, you have 2 options:
1) Use the built in VPN client, you will need your IT's help for this as it requires the group name and password of your VPN server.   You can configure it by going to System Preferences -> Network and 'adding' an VPN (Cisco IPSec) interface.   I haven't had much luck with it, it works sometimes and sometimes it fails, but other people swear by it.
2) Move over to the Cisco AnyConnect VPN client, which does support 64bit. This will also require your IT department as they need to configure the SSL/AnyConnect VPN on the VPN device itself.   I went to this method yesterday and it's worked out great so far.

Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, everything works fine when its turned off. I cannot go on many websites without the VPN.

Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, connection speed is fine when its turned off. I cannot go on many websites without the VPN. My current location is Shanghai, China. OSX Mountain was installed this morning and everything worked fine until then. Is Express VPN not supported? What do i need to do in order to get it working again on my Macbook Pro (early 2011). I want to be able to go on websites such as Youtube, Facebook, Twitter, ect...

Hi,
I am having the same issue listed above on my new Mac Mini i just bought, I also contacted Express VPN support and got the same instructions with exception of the command to run in the utilities terminal. I tried the steps listed, and both commands (posted here, and sent to me directly by Express VPN support), and still unable to connect on my Mac Mini running OS X 10.8.2, but I am able to connect on my iPad and my MacBook which is running Mac OS X 10.6.8. Usually Express VPN is spot on with their customer support, but this is taking longer to get resolved. Here is the steps sent to me
Try doing the following to see if the problem gets resolved:
Please follow the instructions here: https://www.expressvpn.org/support/setting_dns_servers_mac_os
(should still be the same for Lion) and then add the following DNS servers: 8.8.8.8 & 208.67.222.220. After adding the DNS servers, please do the following steps as well:
Note: If you're connecting to your ISP via a PPPoE connection, then set the DNS servers on the PPPoE connection itself and then restart your computer for the DNS settings to take effect.
1. Click on Applications
2. Click on Utilities
3. Click on Terminal
4. Type the following command (without the quotes): "sudo killall -HUP mDNSResponder"
5. Press enter and then try reconnecting to the VPN.
If you're still unable to connect, please send us in the latest log files.
Hope this helps. Let us know how it goes.

My cisco vpn no longer works with Lion

Similar Messages

Maybe you are looking for