My Clicker works fine, except on the Internet?
New to this, Here's my problem, I know sometimes your clicker gets dirty and it needs to be cleaned but theres nothing wrong with mine it rolls fine and clicks fine. Only thing is if I go online I can google something but I can't click on it. If I go to my Banking app for example, I can sign in but I can't click on sign in...etc Someone please help! this is a really aggrevating issue! - Thanks
Try teh general iOS WiFi troubleshooting for help: http://support.apple.com/kb/TS1398
And if the WiFi is greyed out: http://support.apple.com/kb/TS1559
Similar Messages
-
I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.
You haven't a problem. You simply did not read the iWeb Help :
-
About a Month ago I dropped we went swimming and I dropped my iPhone in water and it works fine except at the top for the signal it says searching. Can you please help me with this problem?
It's very likely that the phone is permanently damaged - water corrodes the very fine copper strips which form the circuitry very quickly - but only a service engineer can tell you what its condition is and whether it can be restored to health. If possible take it to an Apple Store (make an appointment) for a free assessment. Don't be surprised if you are told you will have to replace it.
-
I had a case that I drop little juice over my macbook air, I dried it immediately and it keep working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky.
When I back to Jordan I sent it to the authorized support center “ Multivision” in Amman and asked them to help in cleaning the keyboard as it still sticky and I explained to them that the issue and I clarified that all are working fine.
For a two days they didn’t back to me and they answered that they are still checking it, and then after they just called me saying that my macbook is damaged and not working and its better for me to buy a new one!!!
They say that the liquid damaged the main board! I explained to them that this can’t be as it was working fine when I delivered it to them and I didn’t ask them to open it I told them to help in cleaning the keyboard!
I am complaining about this support behavior and they were not cooperative nether polite in communicating.
I am not convinced that the liquid damaged my macbook and I think that the staff at “Multivision” are not qualified and did something wrong to damage my macbook!
I need you help to investigate this issue and have a feedback.Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo -
I dropped my phone into water for a split second and everything works fine except for the home button... I really don't have the money for a new iphone right now.. Please tell me some tricks to get it working again... Thank you
put the phone in an open bowl of rice on a heated surfade such as a raduator
for 48hours -
All sql is working fine except for the COUNT statement ... ?
This piece of code using taglib
<%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
<sql:query var="aantalantw" scope="session">
SELECT COUNT(*) FROM antwoorden
</sql:query>
<c:out value="${aantalantw}"/>
This result should be something like 12 or some other number of course
but i seem to get this :
org.apache.taglibs.standard.tag.common.sql.ResultImpl@fbcb70
Ideas ?Sorry, I made a mistake. The right code is:
<sql:query var="aantalantw" scope="session">
SELECT COUNT(*) AS count FROM antwoorden
</sql:query>
<c:forEach var="aantalantw_row" items="aantalantw.rows">
<c:out value="${aantalantw_row.count}"/>
</c:forEach> -
My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?
Hi LanaJay84,
If you are having issues connecting to the Internet from your Mac, you may find the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Regards,
- Brenden -
i just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy New Year -
My drive crashed. Re-installed CS5. Works fine except that can no longer go from Bridge by clicking on small photo there. I found the place to change but CS5 is not an option. Tried to change prefernce in Windows 8 but not there either.
Thanks. Before my re-installation if I was in Bridge and found a photo I wanted to edit in CS5 I would just double click it and it would be brought in. Now when I do this I am brought into a microsoft viewer. To edit a picture I found in Bridge I have to write down its name and directory, open up CS5 (if it is not) and navigate to the photo. I found the place in Photshop and Bridge where you are supposed to be able to change the default program invoked when you double click on a photo in Bridge but there is no choice given other than the Microsoft viewer. Any help you can give would be greatly appreciated. At some point some web site I was reading suggested the problem being related to CS5 failing to make some change in the registry when it installed? This, or its solution is beyond my ken... Thanks, RobStl
-
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?
It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD -
I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen
Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.
-
Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer. Would you know how I can find the sensor to test it? Could my battery problem be related to something else? Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh? Kudos
heres a pic of the battery temp sensor -
i am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?
Temporarily disable/turn off your anti-virus and firewall software and try the download again.
Stedman -
Cs6: All the apps seem to be working fine, except for Illustrator and Photoshop
I just purchased and installed CS6. All the apps seem to be working fine, except for Illustrator and Photoshop. Why would that happen? I'm a freelancer and I have jobs to finish... can anyone help with this?
what's the problem with ps and ai?
Maybe you are looking for
-
How to put correct name for sheet in loop
Hi I posted you my code , I need you to correct one line . I want to read A1 to A137 into sheets().activate by counting i . But when I type sheet(A & i ).Activate it errors me "Subscript out of Range" and A is empty . Thanks Sub CopymMonthlyda
-
Routine has not been updating the Payment terms feild?
Hello, eg: For the feild "Payment terms" the value "V032" is not updating in to BW,Because the have applied the routine in 2 satge .1 is in Transfer structure and update rules.Please find the below routines routine is in Transfer structure clear RESU
-
SQL queries for finding values in 4 different tables
I need to have certain queries to find specific data in this table, this is just an example table, but I will use the same ideas for my actual website and database. customers (customerID: integer, fName: string, lName: string) items (itemID: integer,
-
IChat AV 3.1 Encryption
Just a note to everyone who tries it (to prevent a million threads from asking this question), encryption is only available to .Mac subscribers. That means that anyone who uses an AIM screenname, a free/trial .Mac screenname, Jabber, etc. will NOT be
-
Its on Win 7 with Thunderbird used for many years. Got directed some junk files where they belong - after some month - means now it is not possible to delete any file from any Thunderbird catalog. New mails are arriving as normal... Best Regards Wald