My Cloud 3TB mit USB Laufwerk - USB Wiedergabe sehr MANGELHAFT!

Hallo! Ich habe die folgende Konfig:MYCloud 3TB mit MYBook 3TB auf USB 3.0.Die Filmwiedergabe von cloud geht problemlos.Bei der Filmwiedergabe von der USB platte habe ich allerdings immer wieder Ruckler, das Bild bleibt stehen oder der Ton fällt aus und das Bild geht weiter....und... NEIN, ich habe keine Kopierfehler.Der Fehler ist Immer vorhanden. meine Wiedergabegeräte sind 3x WD TV live und ein Med8er (wegen der 3D Wiedergabe)wobei ich auch bemerkt habe das die 3D wiedergabe über das GBit LAN auch nicht ohne ruckler geht, deshalb liegen die 3D Filme alle lokal auf dem Med8er, alles andere streame ich über GBit LAN - das ist auch störend..... für hilfe wäre ich dankber....LG Gyu

Hallo!
Also ich dachte mir das so, das ich mir jeweils 3tb Clouds hinstelle, wenn die voll ist, mit ca. 600 Filme, stelle ich mir die nächste dazu, die Festplatten stehen bei mir am Dachboden. Ich möchte keinen Server pc hinstellen, sondern lediglich NAS. Jedoch sollten die Mediaplayer schon fähig sein mit den NAS Lösungen des selben herstellers in beliebiger Anzahl zu kommunizieren, nur tun sie das nicht. Ich glaube gar nicht das es was mit der Anzahl der Clouds zu tun hat, sonst würde die neue 4tb Cloud im standalone Betrieb über die wdtvlive's ja funktionieren. Das tut sie aber nicht. Im Gegensatz zur 3 Jahre alten 3tb Cloud, die funktioniert immer. Ob ich nun den Router direkt verbinde und die Cloud dranhänge oder über einen zusätzlichen hub, es geht einfach nicht mit den neuen nas'n .... Aber sehr wohl mit der mede8er1000x3d, dort läuft alles problemlos.
Ich nehme halt nicht eine größere NAS sondern Stelle einfach eine weitere hinzu. Über Freigaben ja problemlos einzurichten, funktioniert am pc, am Mac, am MacBook, nur nicht an den wdtvlive's,
Hat wer Interesse an 3 wdtvlive Boxen? (PN) technisch und optisch einwandfrei... Angeblich.... Weil sonst könnte ja jemand helfen.....
LG gyu

Similar Messages

Mac Mini G4 - USB-Laufwerk bootet nicht

Hallo,
die Installations-Datenträger meines Mac Mini werden immer ausgeworfen. Praktisch nicht lesbar. Deshalb habe ich ein ext. USB-Laufwerk angeschlossen. Jetzt werden die Daten der Datenträger gelesen. Allerdings läßt sich von diesem Laufwerk nicht booten. Weder mit "C" noch mit "alt". Daraufhin habe ich einen USB-Stick vorbereitet und mit dem OS versehen. Auch von diesem USB-Gerät kann ich nicht booten. Kann es vielleicht sein, dass das "BIOS" (ich entschuldige mich für den Ausdruck) aktuallisiert werden muß? - So langsam binb ich mit meinem "Latein" am Ende. Übrigens, das interne Laufwerk liest andere Datenträger ohne Probleme. - Danke für die Hilfe.
redbull-kalli

It's probably something specific with this drive then. I tried reformatting it with Disk Utility both with the Mac OS Extended (Journaled) and MS-DOS filesystems, but there was no change.
Could the Mac be trying to boot from this drive, and if so, is there a way on the G4 Mini to configure the boot drive? I tried this in the system preferences but it's already set to boot from the HD.
This is my mom's computer so it's kind of hard to explain this kind of quirk to her, which is why I'm looking to see if there's a solution where she can keep the drive in all the time. We finally just got past how you should eject the drive before pulling it out of the USB port, and now it may be how you have to remove the drive before you start the computer. Like explaining a British sports car, pull this knob then that lever...

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Is it possible to use USB webcam + USB mic simultaneously?

I would like to use a USB mic (Blue Snowball USB) and USB webcam (Ligoitch Quickcam) together simultaneously, because I understand the one is good sound and the other is good video for live internet broadcasting of music.
can anyone tell me if this should be possible? I'd hate to buy them and find it doesn't work... THANKS!
I'm using Macbook 2.2 GHz Intel Core 2 Duo OSX 10.5.8

No reason why not.

Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

In some folks' version of the world, you have plenty of ways. YOu have the aforementioned services, you have iCloud, all you need is an internet connection and you're good to go. And that works perfectly...if you always have the internet.
If you want more non-internet dependant ways, then the best way to let Apple know is to send them feedback. They don't monitor or respond to this forum (Beyond removing rule breaking posts) but they do at least log feedback. However, the lack of a file manager will always be an obstacle. There are some apps out there that have at least a pseudo file manager - as in the ability to move documents into multiple other apps. I have Readdle Docs which I can use to download and move things around with, but again, back to the internet or wireless.

My BlackBerry PlayBook won't charge when connected to the computer via the micro-USB to USB cable

Can anybody help me? I don't know why but lately, when I try to plug my BlackBerry PlayBook into my Windows 7 laptop using the micro-USB to USB cable, it connects to my computer without any problems but it won't charge. Instead, I get a notification in the top left corner saying "Unable to charge battery with connected sorce". I have four USB ports and I'm positive that they work just fine because I plugged in some of the USBs I own into each of those four ports and they recognized the USBs without any issues. Does anybody know how I can resolve this issue? Thanks.

The notification is by design and was added to clarify that USB charging is not to be relied upon as a main method of charging. Instead RIM's good intention has caused confusion.
USB (by design) can not provide the amount of power the device needs while it's being used. Technically, it is still trickle charging but the screen has to be off (and I'd turn off Wi-Fi too) since they are high power draining items. I have verified that the PlayBook does indeed still charge but it takes much, much longer than plugging it into a wall charger or rapid charger. In a crunch it will work but the computer has to be on the entire time. A full charge would take many hours.

Micro usb to usb to ppt controler

has anyone tried to connect a usb ppt controler to switch slides yet?
i just ordered a micro usb to usb adapter, but will have to wait for it to be shipped to me.
would be great if this would allow for connecting video and then the also using a handheld usb controler with laser and slide switcher!
Solved!
Go to Solution.

that software still requires not one pc/device, but two.
if uou have ever done seminars, then walking aroind carrying this pb to controll the ppt on a pc is not eeally friendly. not that it is a bad suggestion, nust doesnt fit what the challenge was on this thrwad....which is to be able to have you pb be the terminal and still be able to use a standard ppt controller for presenting.

USB-CAN USB-8473s で定期送信したい

サービスリクエストNo.766130です
OS：WindowsXP
開発環境：Visual Basic 6.0
USB-CAN USB-8473s
NI USB-8473s を用いて
相手ECUのID100hに対して10ms 周期で定期送信処理を
行うためのプログラムを作成中です。
プログラム起動時、下記のプロシージャを実行するのですが、
Status = ncConfig("CAN0:TD0x100", 7, AttrIdList(0), AttrValueList(0)) の
戻り値が 0 にならず、設定ができません。
戻り値 BFF6210Dhになりました。
この問題を回避する有効な手法はありますでしょうか？
よろしくお願いいたします。
Private Sub Can_Open()
    Dim AttrIdList(10) As Long
    Dim AttrValueList(10) As Long
    Dim nret As Long
    nret = 0
    '// CANネットワークインターフェースの設定
    AttrIdList(0) = NC_ATTR_BAUD_RATE
    AttrValueList(0) = NC_BAUD_500K
    AttrIdList(1) = NC_ATTR_START_ON_OPEN
    AttrValueList(1) = NC_TRUE
    AttrIdList(2) = NC_ATTR_READ_Q_LEN
    AttrValueList(2) = 10
    AttrIdList(3) = NC_ATTR_WRITE_Q_LEN
    AttrValueList(3) = 10
    AttrIdList(4) = NC_ATTR_CAN_COMP_STD
    AttrValueList(4) = 0
    AttrIdList(5) = NC_ATTR_CAN_MASK_STD
    AttrValueList(5) = NC_CAN_MASK_STD_DONTCARE
    AttrIdList(6) = NC_ATTR_CAN_COMP_XTD
    AttrValueList(6) = 0
    AttrIdList(7) = NC_ATTR_CAN_MASK_XTD
    AttrValueList(7) = NC_CAN_MASK_XTD_DONTCARE
    AttrIdList(8) = NC_ATTR_LISTEN_ONLY
    AttrValueList(8) = 0
    AttrIdList(9) = NC_ATTR_HW_SERIES
    AttrValueList(9) = NC_HW_SERIES_847X_SYNC
    Status = ncConfig("CAN0", 10, AttrIdList(0), AttrValueList(0))
    If Status <> 0 Then 'NC_SUCCESS Then
        MsgBox "CANオープン前設定１エラー"
        nret = -1
    End If
    If nret = 0 Then
        '//ID100
        AttrIdList(0) = NC_ATTR_COMM_TYPE
        AttrValueList(0) = NC_CAN_COMM_TX_PERIODIC
        AttrIdList(1) = NC_ATTR_BKD_PERIOD
        AttrValueList(1) = 10
        AttrIdList(2) = NC_ATTR_CAN_DATA_LENGTH
        AttrValueList(2) = 8
        AttrIdList(3) = NC_ATTR_CAN_TX_RESPONSE
        AttrValueList(3) = NC_FALSE
        AttrIdList(4) = NC_ATTR_RX_CHANGES_ONLY
        AttrValueList(4) = NC_FALSE
        AttrIdList(5) = NC_ATTR_READ_Q_LEN
        AttrValueList(5) = 0
        AttrIdList(6) = NC_ATTR_WRITE_Q_LEN
        AttrValueList(6) = 10
        Status = ncConfig("CAN0:TD0x100", 7, AttrIdList(0), AttrValueList(0)) 　←　ここの箇所でエラーになります
        If Status <> 0 Then 'NC_SUCCESS Then
            MsgBox "CANオープン前設定２エラー"
            nret = -1
        End If
    End If
    If nret = 0 Then
        Status = ncOpenObject("CAN0:TD0x100", TxHandleW1)
        If Status <> 0 Then 'NC_SUCCESS Then
            MsgBox "CANオープン前設定３エラー"
            nret = -1
        End If
    End If
End Sub

N.Mo さん
　このエラーはハードウェアが対応していない旨のエラーですね。
　USB-8473(s)使用時のエラー-1074388723に関して
　エラー番号がLabVIEWと違いますが、ダイアログに出ているHEX値が同一であるのと、
行いたい内容が一致しているので、結論としてはハードウェアが対応していない、ということになります。
　USB-847xシリーズで使用できるAPIは以下のリンク先に記してあります。
　Which NI-CAN Frame API Functions does the NI USB-847x Device Support?
　ハードウェアの機能が使用できないとなると、後はソフトウェアのタイミングで制御することに
なります。(もしくは外部のカウンタボードからトリガを受けて同期させて。。。少々面倒になりますね。）
　ご検討ください。

Is it possible to install the Creative Cloud/Application Manager on a USB?

I tend to use the Applications a lot and it would just be easier to install the creative cloud on my USB rather then the computers I go to, mainly because in order to install it on my school computers, it would require an admin password. So I was wondering if there was a way to possible install both the Creative Cloud Connection, and the application manager (along with apps) on my USB?

Hi,
Installing it on a USB(external hard drive) will not be a good idea as the products will not work on another computer if you connect this USB to it. In your scenario i will suggest you to use creative cloud packager(CCP) for deployment on other machine.
details are available on http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager.html
Thanks
Kapil Malik

New 3tb Seagate drive external USB enclosure MAC OS X 10.6.8...

I just purchased a new 3tb Seagate drive to replace a 2tb drive in an external USB enclosure, I can access, partition and format it using Parallels but can't even see it in Disk Utilities on Mac OS X 10.6.8...????!!!!!
Any Help?
I beleive it has a Jmicron chip in the USB to ATA BRIDGE....

More info: the USB to ATA/ATAPI bridge can be seen in system profiler....
The drive works, no problem through parallels... ***?
USB to ATA/ATAPI bridge:
Product ID:          0x2338
Vendor ID:          0x152d (JMicron Technology Corp.)
Version:           1.00
Serial Number:          000000000000
Speed:          Up to 480 Mb/sec
Manufacturer:          JMicron
Location ID:          0xfd143000 / 7
Current Available (mA):          500
Current Required (mA):          2

My G5 mac recognizes only 746 GB of an external 3TB drive connected by USB? Can I fix that? How?

I just purchased a WD 3.0 TB drive. I've placed in the second bay of my G5 tower (running 10.5.8). I've also tried it in an external enclosure connected by USB. In both cases my Mac recognizes only 746 GB of the drive. Can I fix that? How?
Thanks.

Hi Kenny,
It's using the new "Advanced Format"...
http://en.wikipedia.org/wiki/Advanced_Format
WD says this about their Advanced Format disks on OS X:
Mac OSX version 10.4 onwards (Tiger, Leopard and Snow Leopard) can use the GUID Partitioning Table scheme (GPT) which will align an Advanced Format drive correctly. Mac OS versions using Apple Partition Manager (APM) will not align partitions correctly and will not provide optimum performance.
http://apple.stackexchange.com/questions/5558/can-i-use-an-advanced-format-drive -in-a-late-2010-13-macbook-pro
You can only use it as a DAT Drive after GUID partitioning, you can read it but G5s cannot boot from GUID.

Epson USB or USB not appearing as an option in Printer Set Up Utility

I am trying to get my Epson Stylus RX510 (RX500 outside Australia) multi function printer to work with my MacBook Pro. I have the latest, correct Intel drivers installed (3.0aEs and scanner software CSPC3_PCF_OSX_27w41). When I connect via USB and select "Add" in Printer Setup Utility, the printer shows up but the drivers do not appear.
The "Auto" option is greyed out.
There is no option for USB or Epson USB available. I think this is the key but...
Having spent days trying to resolve this, speaking to Epson and Apple techs, I still have no luck. This is what I have done so far:
- Unplugged the printer from the MacBook
- Reset Print Setup Utility
- repaired permissions
- in Command "I" I have selected "Open using Rosetta"
- uninstalled all the old Epson drivers
- reinstalled the new drivers
- run Disk Utilty (no problems found)
- run printer setup repair
- reinstalled Mac OS X without the old epson drivers and gimp drivers
- reinstalled the new drivers again - no luck.
- went to the Epson USA site and downloaded the drivers for the RX500 instead of the RX510 - still no luck.
- cried!!!! (kidding - but almost made everyone around me cry).
Incidentally, printer is working perfectly when connected to my G4 with the old drivers, so it isn't a printer problem or dodgy USB cable.
Epson tech says there is nothing wrong with the drivers and I have done everthing correctly.
Apple tech says I have done everything they would tell me to do and to post it in discussions. Here's hoping one of you gurus can help me please.

Thanks - I did already try PSR but on your advice just had another go and below is the log, wherein I suspect the answer lay (for any of you mac guru's anyway). Do I need to find and install all the missing files to get my Epson printer working using the Epson drivers (ie. don't want to use CUPS)? If so can I load them from the Mac OS X install discs without having to reinstall Mac OS X all over again?
Printer Setup Repair Log:
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/Info.plist is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/MacOS is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/MacOS/CUPS is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/Resources is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/version.plist is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/USB.plugin/Contents/Resources is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/USB.plugin/Contents/version.plist is missing!
Recreating symbolic links...
Done.
Verification complete.
1924 files examined. No problems were found.
9 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
Thanks again! Julie

What's a good hardware set up for a solo musician? USB pedal USB keyboard audio interface MIDI interface?

I am new to Main Stage. I have not bought any hardware interfaces yet because I don't know what will be the most flexible in the long run. I would be using the Main Stage's innate synths and keyboards, drums, an acoustic/electric guitar, bass, harmonicas and vocals. What type of hardware would you recommend? MIDI/USB keyboards? MIDI interface? Audio interface? USB pedal board controllers?
Would guys help me with specific suggestions and pointer on how I can make a good choice based on my needs?
much thanks!
Fabio.

Then below this is the recording level slider which is all the way to the left or at 0. This is where the problem lies I think as this slider is greyed out and cannot be moved!
for this part:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdimmed
(Let the page FULLY load. The link to your answer is at the top of your screen)

EMU USB 0404 USB - Audio Problems

Hello forum!
I recently bought an 0404 USB and I am having problems with the audio quality.
Prob 1 - When I plug a guitar into input A, the sound switches between clean and a distorted/clipping/phased kind of sound, and I also get some clicks. I have tried adjusting the ground switch position and the buffer size for the input, but with no success. The sound switches from clean to "dirty" (if that is the correct term) and back at random and it is almost impossible to get a clean sound to record with the equipment. Can anyone help me solve this?
Prob 2 - when I do get a clean signal - the playback is of an inferior quality and there are audible clicks (nothing to do with the metronome) more like a static noise.
Prob 3 - I can't adjust the sample rate in the EMU control software - it only lets me select 41khz. I have only used it with Cubase so far which I believe supports a max sample rate of 41kHZ- but I don't know if it will be the same with Sonar. Note interface is definitely running in USB 2.0 mode as it states this in the EMU software controller.
Prob 4 - since installing the software for EMU 0404 my computer has only been starting in safe mode (I have to adjust the display settings etc) and it automatically restarts when I shut the computer down.... Im running the computer in XP SP2.
Any help you can offer is appreciated. Happy recording guys
PS I have already sent these questions to the EMU product support guys, but they are taking a while to get back to me.
Bookman1

When you use ASIO driver mode, for samplerate settings, E-MU follows settings done in software ... as like in Cubase LE (you can test this by leaving the E-MU control panel open while changing the samplerate setting in Cubase).
You set the samplerate through Cubase Project Setup:
http://img213.imageshack.us/img213/5609/clesreb2.jpg
Just use native ASIO drivers in ASIO capable software (there are Sonar LE, Cubase LE and Live 4 Lite bundled w/ the card) with this device. Remember also set the ASIO latency properly (one instrument w/o plug-ins in path ... you should be able to go as low as 2ms).
If you like just to play guitar through E-MU interface then, just use ASIO capable software like VSTHost for input/output (you'll need to load least one VST plug-in into VSTHost to get audio through ... maybe Voxengo SPAN or Sonalksis FreeG is the one w/o effect in audio).
http://www.voxengo.com/product/SPAN/
http://www.sonalksis.com/index.php?section_id=99
http://www.hermannseib.com/english/default.htm
If this area of music is new to you then, more plug-ins can be found through KVR.
jutapa
Message Edited by jutapa on 02-23-200805:21 PM

My Cloud 3TB mit USB Laufwerk - USB Wiedergabe sehr MANGELHAFT!

Similar Messages

Maybe you are looking for