My CMT-X3CD personal audio system won't connect my ipod using USB cables

My new CMT-X3CD personal audio system cannot connect to my Ipod.I have tried numerous USB cables - one doesn't register at all, the other charges my ipod but doesn't play through the system, and a third just "searches" for the USB device. Any ideas please??

Hi ppatrick,
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

  • IPad 1 won't connect to PC using USB

    Hi there,
    I've only had my 1st gen ipad connected to my laptop once, when I first got it. Now, when I plug it in to the USB cable, nothing happens. I've tried restarting the iPad as well as iTunes.  Has anyone had this problem or have any suggestions on how to fix?

    http://support.apple.com/kb/TS1538

  • IPod Nano + Sony personal audio system - how to get radio to play?

    We got a Sony RDP-M7iPN personal audio system - that's a good thing.
    But the iPod Nano won't play radio if the headphones aren't plugged in.  When it's docked on the Sony system, it won't play radio and there's no way to get a headphone jack plugged in (no room).
    Is there something we're missing?  Or is there some adapter we need?  Any thoughts?

    Go on to System Preferences and open the Bluetooth icon. Ensure that the SRS-X2 speaker is switched on and next to the Macbook; press down on the Bluetootch icon that is above "pairing" on the speaker and keep pressing it down until it beeps; your Macbook should now be able to find the speaker and you can click pair to pair the two together.

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

    My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

    Hi Pebbles2313,
    It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
    OS X: Printer and scanner software available for download - Apple Support
    http://support.apple.com/en-is/HT201465
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but comes up with software unavailable error.

    My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

    Try downloading the driver directly from Canon's web site.

  • I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?

    I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Downgrading the iOS is not supported by Apple.

  • ITunes won't recognise my iPod on USB 2.0, only 1.1

    my computer won't recognise my iPod touch 1.1.4 when it is connected via my USB 2.0 PCI card, only when it is plugged in via the motherboards inbuilt USB 1.1 ports. I have plugged it into other computers (all pc's) and it works fine on their USB 2.0 ports.
    What could be causing this?
    cheers.

    Try this if you have not already. This removes and reinstalls ALL Apple software and sometimes that is required.

  • New ipod touch won't connect, shows itunes and usb icons

    My son just got a new ipod touch for his birthday. I have the latest version of itunes, and I have spent hours scouring the internet looking for a solution. Whether the thing is plugged into the computer or not, all it will do is show the usb cable icon and the itunes icon. When I plug it into the computer, my computer makes the noise that indicates that a device has plugged in, the ipod beeps one beep, and I get an error message from itunes that says that a rented movie from the ipod cannot be imported into itunes. Other than that, the computer, including itunes, doesn't acknowledge the existence of the ipod, not in the device manager, in itunes, in the itunes diagnostics tests, or anywhere else. In addition, the battery won't charge.
    Also, I noticed that I do not have anything called "Apple Mobile Device Service," although I do have something called "Bonjour service." Are these the same thing or could this be the problem. Please HELP!

    See:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    You need iTunes 10.5 or later and that requires OSX 10.5.8 or later.

  • Mac Mini won't connect to internet using Apple products (Safari, iTunes, AppStore). Date and time are frozen to the moment CPU is booted up. Firefox works. Cannot update.

    For the past few days my Mac Mini has been having issues.
    Safari won't connect to internet, but Firefox does.
    Time and date are frozen. Only resets when copmuter is re-booted.
    Unable to update via App Store and iTunes won't connect either.
    Please advise.

    Hi again,
    Let me ask for some better help for you that is familiar with this problem (if in fact it is a similar problem with the IP address and your ISP.
    The other topic concerning this can be found at:
    http://discussions.apple.com/thread.jspa?threadID=2725608
    It is a somewhat lengthy thread but may just apply to your situation.
    Anyways I will see if I can call on some better help for you. Hang in there. Best to arm yourself with enough info before contacting Comcast so they might know what you are dealing with fully.
    littleshouders
    edit: I have posted for some extra help for you that may have a better idea of what's going on if it is your ISP and their modem and how it handles the IP address causing Safari and iTunes not to connect. Hang in there it may take awhile but I'm sure someone will pop in to help.
    Message was edited by: littleshoulders

  • ITunes won't connect to iPod

    I've recently been having problems with my iTunes and iPod. I have the latest version of iTunes and have probably uninstalled it and reinstalled if a million times but it still won't connect to my iPod which is basically brand new. Every time I plug my iPod into my computer freezes. So then I have to unplug the iPod and a message comes up on my computer that says the iTunes file that reads iPods was not installed correctly. But uninstalling and reinstalling it doesn't seem to fix anything so I haven't been able to update my ipod in awhile. Does anyone know what's wrong and how to fix it???? If so, it would be greatly appreciated.

    If you only reinstalled iTunes, it might be worth reinstalling all the iTunes components.
    Here is a method for uninstalling them before you reinstall iTunes:
    http://support.apple.com/kb/HT1923
    Also have you seen this article:
    http://support.apple.com/kb/TS1538
    The symptoms are not the same as your, but I guess it might be relevant.

  • Internet won't connect on iPod touch?

    At the beginning of the week my internet stopped working, someone fixed it for me yesterday and it works fine the the computer but i can't get the wifi to work.
    It still pops up on my ipod same as always called linksys, it will give me three bars but tell me its not connected to the internet if i try to visit a website.
    Oldly enough it will let the google homepage load and thats it. I have tried to reset my network settings, restart the router, renew lease but nothing works.
    One other thing i can mention is that when i restarted my computer and logged in a box popped up called dial up and asked me to connect to the internet.
    Also my wifi is not locked and doesn't require a password, and my sisters laptop won't connect to the internet either.

    Some background might help:
    - What make/model router are you using?
    - Does your router have the latest firmware? (Check the manufacturer's support web page)
    - What security type are you using? (None, WEP, WPA, WPA2)
    - Does your router use DHCP?
    - Have you tried powering off and restarting the router?
    If you are connected to the router but can't access the internet then the possibility exists that the DHCP service in your router is not giving you a local network IP address.
    To check on this go to:
    *Settings > WiFi >* +your network name+
    and press the ">" to the right to bring up the connection details.
    Report all that you see. If the IP address starts with 169 then the router is not giving a local network IP address and you will not be able to access the internet.

  • My system won't connect to server after showing that update for 29.0.1 has been accepted

    I receive notice that an update to 29.0.1 is available and have for a week or so. When I install the update a window opens that shows a progress bar that continues to respond, as progress message shows.. connecting to server. I have waited for up to 10 minutes with no change to progress. When checking with mozilla my system shows that I have the latest version. These updates are for security purposes and I need to know if there is a problem or if my system is at risk. Is this update notice a glitch?

    Its because, your firefox not update the version. the best way to solve this issue is clean reinstall
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • Cisco Video Monitoring System won't connect

    Hi,
    I have two PVC-300 cameras and I'm using the Cisco Video Monitoring System. I installed the Monitoring System to my laptop and everything worked fine.
    Now I'm tring to install it to our receptionist's laptop (with same config file) and it won't work. I've even re-installed Windows and still nothing. I can ping both cameras and I can even login to the web-based GUI, but I can't get the video feed to show from the Monitoring System. The Monitoring System's search finds both cameras, but won't show the video feed. It just keeps "Connecting..."
    All the devices are on the same network/subnet. The cameras are on v.1.0.1.13 and Video Monitoring System on v.1.2.1. The laptop (Sony Vaio) runs WindowsXP SP3.
    What to do, what to do?
    -Petri

    I feel like I just answered this question recently, lol
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6918/ps9692/ps9944/ps9950/data_sheet_c78-508956.html
    Take note of the section "Network".
    RTP: http://en.wikipedia.org/wiki/Real-time_Transport_Protocol
    The issue could be a couple different problems, but the most likely is that RTP traffic is not allowed by the firewall.  Since they are on the same subnet it is most likely a software firewall.  Like windows firewall.
    Make sure the systems have windows firewall disabled and retry.  If it works you can re-enable the windows firewall and then configure it properly.  Here is a article that lists some information that may help you configure the firewall properly:
    http://www.microsoft.com/windows/windowsmedia/forpros/serve/firewall.aspx
    Much of that document is for windows media server, but windows media server uses the same ports and such as the camera.  (thats from memory)

Maybe you are looking for