My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

Similar Messages

HT204053 Me and my daughter had been using the same apple id, she was triyng to change it now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.

Me and my daughter had been using the same apple id, she was triyng to change it, now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.

Your contacts are helpd on the server, so if you sign out from your iCloud account and sign into another one they will disappear. If you sign back into the original account they will reappear.

I have an iPhone 5s and an iPad 2 both using the same Apple ID how can I FaceTime the iPad from the iPhone?

I have an iPhone 5s and an iPad 2 both using the same Apple ID sometime I'd like to FaceTime the iPad from the iPhone to talk to my wife while at work how can I get it to do this it always says unavailable.

Naw I figure it out without all that had to go into the FaceTime settings and only use the phone number on the iphone and only use the Apple ID on the iPad works great now no need for two Apple ID or any signing in and out.
Thanks for your help though

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

Our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

Just use the same one on all devices.

I have update my iphone 4 and my Mums they both use the same apple id and are both backed up to icloud now her contacts are on my phone.

Hi I updated my iPhone 4 and my Mum's iPhone 4 to software version 5.0. They both use the same apple id and they are both backed up to iCloud. Once I updated my mum's phone i noticed that her contacts are now on my phone i deleted some of them but then she noticed that they had been deleted off her phone to. Has anyone got any ideas please.

Welcome to the Apple Community.
Your password for logging into iCloud cant be different than your password for your Apple ID if you use that Apple ID to log into iCloud, it sounds as though you are using 2 accounts.

Multiple users using the same templates?

The place I work puts out a weekly TV show and we regularly use the same lower thirds for various titles that come up throughout the show. After opening them up in Motion 3 I saved the titles as templates, which is great because now I can do all the work in FCP rather than Motion.
However, the templates are saved to my user on the local HD. We have multiple editors that work on multiple computers.
Is there a way to make the templates available on all computers to all users?
Any suggestions is appreciated.
jesse.

Too, here's one more roadblock to (hypothetically) consider.
Even if what we've discussed happened to work, there would be one more issue: network bandwidth. When you add one of these "Master Templates" to a FCP timeline, then drag it to the browser, then right-click and select "Reveal in Finder", it points straight to the Templates folder that I alluded to earlier. Locally.
So if this template lived in one central place then, potentially, all editors could be trying to access it, in real-time, remotely, simultaneously. I think this would wreak havoc quickly. Unless of course you're employing a SAN. Now we're talking about a whole new beast. (Unless you've got a SAN already. ;))
Bottom line is you're going to distribute templates to all editors individually. Unless you're developing new templates all the time, then this shouldn't be too much of a chore. Just out of curiosity, how many editors will this be deployed to?

How to get Bursting file to use the same template as selected by user

I have created an XML publisher bursting control file for a standard Oracle report Direct Debit letter.
The user wants to be able to select from a number of different letter templates which is ok except that the bursting control file is fixed to use one template.
How can I get the bursting control file to use the same letter template as selected by the user when running the report ?
I am using XML Publisher 5.6.3 with bursting patch.

Try these following, which come to my mind now as of now.
In the bursting file, you can do the filtering and apply different template..
<xapi:template type="rtf" location="/usr/template1" filter=".//DIRECT_DEBIT[./parameter_or_element='first_template']"></xapi:template>
<xapi:template type="rtf" location="/usr/template2" filter=".//DIRECT_DEBIT[./parameter_or_element='second_template']"></xapi:template>
second option..
you can replace the element from the xml in the bursting control file.
${ELEMENT_NAME}
can be used in the template name i guess..
<xapi:template type="rtf" locale=""
location="xdo://AR.${SHORT_NAME}.en.US/?getSource=true" translation="" filter="">
</xapi:template>
But in this short name has to be in XML file...
I haven;t tried it...wil try it wheni get time..

HT5569 iPhone WiFi issue. I enter a password, click join, and get a message back that it is the incorrect password. I have several computers and two other iPhones connected using the same password. Any clues?

iPhone WiFi issue. I enter a password, click join, and get a message back that it is an incorrect password. I have several computers and other iPhones connected using the same password. Any ideas?

Hey there Gordo456,
It sounds like you are not able to join your Wi-Fi network with the correct password on 1 out of many devices. I recommend the troubleshooting from the article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Restart your iOS device.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If that troubleshooting does not resolve the issue, I would next try these steps from further down the article:
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings.
Thank you for using Apple Support Communities.
Regards,
Sterling

I'm getting the iPhone5S and I know you can use the same Apple ID but I have to delete my details off my current phone, how can I keep my account so I can use it again on my new phone?

When I sold my iPod I had to delete my apple account but I want to use this apple account on my soon to be new phone the iphone5S, I know you can use the same address but if I delete the account on my phone will I still be able to get it back on my new phone? And what about purchases and iBookstore? If I've purchased items will I be able to get them on my new device?

Yes, you only have to make an icloud backup on your old phone and restore from that backup on your new phone. If everything goes well, you can safely restore your old phone.

How to have 2 Users on 1 Mac and both be able to use the same iTunes Library?

We are using 1 Mac with 2 Users, how can we both use the same iTunes Library?

Thanks Allen, However I have found another article that best applies to my situation.
http://support.apple.com/kb/HT1203

Upgraded to iOS8 and now two iPhones that use the same apple id are receiving the same calls

I have two iPhone 5s, one for work and one for personal use. Since upgrading to iOS8 I am now receiving work calls on my personal phone as well as my work phone , so both phones are ringing at the same time. I'm looking to stop receiving work calls on my personal phone, any help is greatly appreciated!
Thanks,
Ashliegh

I'm sorry, but it isn't a problem, it is a feature. While you may find it something you do not like, then you need to change the settings as I described earlier. This is part of how continuity works.
Apple has never supported downgrading of iOS, so don't expect that to happen. If you have done what I said, the need to create and connect to another Wi-Fi network is not necessary. All you have to do is turn it off. Apple did not program anything wrong.

Fonts different between CS3 and CS5 on Win7 system using the same fonts directory

I have several files created in Fireworks CS3 that work fine. Fonts are all installed in the system directory on my Win7 box. This used to be a WinXP Pro box.
I can load a file into Fireworks CS3 without a single issue and the text all looks perfect. The way it should. Close CS3, open CS5 and load the same file and CS5 tells me I have to update my fonts. Why? Same system, same fonts in the same fonts directory. Only thing that's changed is that I'm opening the file(s) in CS5.
The fonts do not look the same in CS5. Am I going to have to redo every Fireworks CS3 file so that it looks correct in CS5? If so, why?
-- Bob
Here's a sample image the way it's supposed to look. The Swift gets hosed. PlazaDUtil is the font. I'd hate to have to redo all my logo files.

Prior to CS4 Fireworks used the Macromedia type engine. From CS4 forward, adobe introduced the adobe type engine to improve text handling/integration between FW AI and PS. As a result moving CS3 files over to cs4 forces FW to update the fonts.

How can I make iMessage work on 2 iPhones with 2 different phone numbers using the same Apple ID?

My work requires me to split time between two countries (Ph and Bn). I had an iPhone 4 with a Ph number and a Nokia for the Bn number. iMessage was running on the iPhone 4 with the Ph number and my apple ID. I recently replaced the Nokia with an iPhone 5 which I set up using the iCloud back up of my iPhone 4. I cant seem to set up iMessage (and Facetime) the way I want it to work on the iPhone 5. Im not sure if iOS 6 would allow me to do this so I'm throwing this out to the forums to check if its possible.
iPhone 4 w/ iOS 6
- uses Ph sim card
- Ph number set in Phone>My Number
- iMessage>Send & Receive has the following data
Ph Number - greyed outand checked
Apple User ID - checked
iPhone 5 w/ iOS 6
- uses Bn sim card
- Bn number set in Phone>My Number
- iMessage>Send & Receive has the following data
Ph number greyed out and not checked
Same Ph number checked
Apple User ID checked
Ive tried turning on/off my iPhone 5 and logging on and off iMessage but I cant seem to get it to update the iMessage phone number to the Bn number. Any idea how I can do this?

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

Now I have a regular ipod and a shuffle can I use the same itunes account

How do I start to set up my shuffle to work on the same itune account?
Once I add my shuffle will it wipe out any / all songs?
Thanks

If the version of iTunes on your computer is newer than or the same version as the version available when the iPod shuffle came out, you can simply plug the second iPod into your computer and go through the iPod Setup Assistant. Adding a new iPod to your computer will not erase any songs from the iTunes library or other iPods associated with that computer.
(20466)

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

Similar Messages

Maybe you are looking for