My COM driver doesn't show any methods or properties in LabView 6.0.

I have a working COM driver (VB, VC++, and others) that does not function in LabView 6.0. After I setup the Automation Refnum, Automation Open, and then either Invoke Node or Property Node shows no methods or properties. Am I doing anything wrong?

I found the answer to my question. I needed to include the following line in the LabView.INI file:
enableCustomInterface=True
This allowed full access to my COM driver.

Similar Messages

ICloud Drive Doesn't Show Any Other Folders

Hello, today when I opened up pages to edit a file, I noticed that I couldn't access it on my iPhone. I went to Pages (the folder in iCloud Drive) and it looked as if it was uploaded. I then went to a new finder window and went to iCloud Drive. It shows nothing but one folder I created to store other files. Why can't I access any other file and why won't they upload?

Update: it seems as if any documents on my iPhone are also not being uploaded. How can I get these to sync?

SpindownHD doesn't show any hard drives

Hi all,
I'm trying to stop my external firewire drive from spinning down at inopportune times. I've installed the CHUD developer package, but spindownHD doesn't show any of my attached drives. Can anyone please tell me why this is?
Jason

I have the same problem. I don't even see the internal HD.

When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

So to give a little big of a background on my computer. I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation. I only worked on it [mostly brousing the web, and itunes] for about 6 months because I was taking all of my general courses for college. I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house. I was only Using it every now and then and it would be idle/ or shut off the rest of the time.
Fast forward to fall 2011. Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer. I installed a free 30 day trial of adobe cs5.5. It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it. After the trial ended I kind of stoped using my computer again, rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
Here's where it gets tricky.
So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space. I had to uninstall all of the programs one at a time other wise it would freeze up. I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while. Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen. So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.
So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date. When I do I get the gray screen with the apple and the spinning wheel. This happens OVER and OVER. I tried soft reseting it, manually turning off the computer, you name it. But it still keeps happening. So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up. But if I connect my external hard drive it shows up right away. I try seeing if it pops up on disk utility, and it doesn't show up there either.
Is it possible that my hard drive is shot? I haven't really used my computer that much. Its pretty much sat at my parents house for 2 of the 3 years I've had it. So its not like I used it a whole lot.
Help! I'm a college student who needs her mac now more than ever for my design classes!

The battery alone is a $5 to $15 part. Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more. This article discusses the varying successes of third party drives on iMacs:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

IPS MC: It doesn´t show any signature.

Hi.
I had IPS MC 2.1.0 (Build 123) functioning fine. I installed the idsmdc2.1.0-win-CSCsc336961.tar file in order to solve the CSCsc33696 bug. Next, I installed an update signature for IPS version 5 (But I didn´t has any IPS sensor version 5, I just was checking), but the update didn´t work. Afther it, I noted that I have a big issue: When I try to modify any signature, in the Settings->IOS IPS, it shows:
Object loading failed. Errors occurred while loading the Signatures. Not all signatures may have been loaded.
It doesn´t show any signature.
I erased all the sensors, including the IOS IPS. Then I import one of the IOS IPS and follow the instruction for the CSCsc33696 bug. I reimported the device, deployed configuration, disabled the IPS feature in the router and enabled the feature in order to load the signature configuration, but the issue persist. Then, I installed the newest signature update to IDS sensor version 4 (it includes IOS IPS update) and it installed without problems, but the problem in the sigature page perisist.
I reinstalled the IPS MC, but the problem persist. I uninstalled the IDS MC, and installed again without save the database. It shows the application IDS MC and Security Monitor without configuration, like a new installation, but the issue persist!!!
Someone had this problem? Someone know how can I solve it?
Thanks.

The Cisco IOS IPS feature restructures the existing Cisco IOS Intrusion Detection System (IDS), allowing customers to choose to load the default, built-in signatures or to load a Signature Definition File (SDF) called attack-drop.sdf onto the router. The attack-drop.sdf file contains 118 high-fidelity Intrusion Prevention System (IPS) signatures, providing customers with the latest available detection of security threats. For more information refer to following url:
http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c9587.html

Western digital hard drive doesn't show up anymore

I bought a Macbook Pro a few months ago and I've been using my Western Digital external USB hard drive with up until now with no problems. Then today for some reason, I turn my computer on and the drive doesn't show up anymore. It doesn't show up in disk utility either. I've rebooted a few times but no luck. I inserted a flash drive and it mounts ok so it's not the USB port. I even switched usb cables just in case the cable was bad. Any suggestions?

Hi there
Sorry to hear you are having trouble with your Mac.
Is the ext HD a powered drive (needs AC power to run) or portable? (smaller, doesn't need to be plugged in to AC)
If its AC powered, check that all the usual lights are lit up on it (flashing activity light, power light etc), if not, then you would need to contact WD.
You can also try resetting the SMC & PRAM, as I have seen this cause a HD to not mount before.
Cheers

Why my iphoto doesn't show any of my picture?

I accidently deleted some of my file, and since then my iphoto doesn't show any of my pictures, i mean nothing comes up when I click on it.

I would post in the iPhoto forum:
https://discussions.apple.com/community/ilife/iphoto

Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.

Switch doesn't show any log when AC is put in back.

I'm using two kind of switches i.e Cat2960S-24TD-L and Cat2960S-48TS-L with RPS2300 for backup power.
One question was raising in my head during the power redundancy test on the switches.
My question is how NMS can recognize that AC power is put in back as normal status without any log.
Each switch has two power sources. One from AC built-in power and the other from RPS2300 as below.
Access_SW#show env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 39 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 50 Degree Celsius
Red Threshold    : 60 Degree Celsius
SW PID                 Serial#     Status           Sys Pwr PoE Pwr Watts
1 Built-in                                         Good
2 Built-in                                         Good
SW Status          RPS Name          RPS Serial# RPS Port#
1   Active          RPS1              FDO1447YGT3 3
2   Active          RPS1              FDO1447YGT3 6
~snipped~
DCOut State   Connected Priority BackingUp WillBackup Portname        SW#
    1       Active No                6            No         Yes         <>                -
    2       Active No                6            No         Yes         <>                -
    3       Active Yes               6            No         Yes         Access_SW         1
    4       Active No                6            No         Yes         <>                -
    5       Active No                6            No         Yes         <>                -
    6       Active Yes               6            No         Yes         Access_SW         2
When I pull out the AC power cable out from the switch, it shows the proper log saying as below.
Access_SW#
Jul 8 17:15:46 UTC: %PLATFORM_ENV-1-PWR: Internal power supply not supplying power (Access_SW-2)
Access_SW#show env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 39 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 50 Degree Celsius
Red Threshold    : 60 Degree Celsius
SW PID                 Serial#     Status           Sys Pwr PoE Pwr Watts
1 Built-in                                         Good
2 Built-in                                         Unavail
SW Status          RPS Name          RPS Serial# RPS Port#
1   Active          RPS1             FDO1447YGT3 3
2   Active          RPS1              FDO1447YGT3 6
~snipped~
DCOut State   Connected Priority BackingUp WillBackup Portname        SW#
    1       Active No                6            No         Yes         <>                -
    2       Active No                6            No         Yes         <>                -
    3       Active Yes               6            No         Yes         Access_SW         1
    4       Active No                6            No         Yes         <>                -
    5       Active No                6            No         Yes         <>                -
    6       Active Yes               6            Yes        Yes         Access_SW         2
But I put AC power cable back into the switch, it doesn't show any log and any change to me. It still shows 'Built-in is Unavail' as below.
Access_SW#show env all
~snipped~
SW PID                 Serial#     Status           Sys Pwr PoE Pwr Watts
1 Built-in                                         Good
2 Built-in                                         Unavail
SW Status          RPS Name          RPS Serial# RPS Port#
1   Active          RPS1              FDO1447YGT3 3
2   Active          RPS1              FDO1447YGT3 6
~snipped~
DCOut State   Connected Priority BackingUp WillBackup Portname        SW#
    1 Active No                6 No         Yes         <>                -
    2 Active No                6 No         Yes         <>                -
    3 Active Yes               6 No         Yes         Access_SW         1
    4 Active No                6 No         Yes         <>                -
    5 Active No                6 No         Yes         <>                -
    6 Active Yes               6 Yes        Yes         Access_SW         2
The problem is how the operator can decide 'Now AC power is okay so I will push the button on RPS to make it backup again' without getting any information from the switch.

Hi innetee9228:
If the output of "show env all" doesn't change when you put the AC power back in, that's indicating a bigger problem. You see the %PLATFORM_ENV-1-PWR: message go when the power comes out, so there should be one when the power goes back. That's more indicative of an IOS problem where the status isn't getting updated as it should.
The SNMP agent rides along side the guts of the IOS that feed the SHOW commands. If the hardware isn't reporting correctly or whatever and "show env all" doesn't tell the truth, it's not likely that the SNMP agent is going to be receiving truth, either.
Once you have that addressed, you should be able to turn up power supply event traps and send them to whatever SNMP Manager you'd like, and have that alert your operator.
nms-6506-e(config)#snmp-server enable traps envmon supply ?
fan          Enable SNMP envmon fan traps
shutdown     Enable SNMP environmental monitor shutdown traps
status       Enable SNMP environmental status change traps
temperature Enable SNMP environmental monitor temperature traps
nms-6506-e(config)#

Aperture 3 Import Dialog Doesn't Show Any Images

Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
Screenshot:
http://dl.dropbox.com/u/1250153/a3.png
Any ideas or fixes?

Hello qua
You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
Regards,
Gary

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

My external hard drive doesn't show up in finder, is it dead?

My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

My COM driver doesn't show any methods or properties in LabView 6.0.

Similar Messages

Maybe you are looking for