My compatible ebook reader is not showing in ADE

I have downloaded epub books from the library onto a windows laptop ADE.
I connected my ebook reader to the computer before opening ADE but it does not show in the library
I have ADE authorization but cannot transfer my library books as the ebook reader is not showing.
I have previously transferred onto the same ebook reader but I have had to do a restore on the laptop and then delete my previous authorization and re-authorize.

I have had something the same, it's now sorted.  I don't know what I did but I now have my book on my reader.  Perhaps someone out there could tell us what to do as I am sure this is going to happen again.  I tend to just go at it without knowing what I'm about but it works for me.  I know that is not satisfactory but I have no skills in the technology field!  Good luck - to us both! 

Similar Messages

  • External hard drive seagate 3.0 cant read and not showing in disk management.

    Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU.. 

    Hi,
    Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
    Karen Hu
    TechNet Community Support

  • W520 Smart Card reader does not show up in Device Manager

    W520 Smart Card reader does not show up in Device Manager.
    It was working before and now nothing.  Nothing happens when SD card plugges in.
    Could my smart card reader stop working or is this a configuration issue?
    Any thoughts?
    thanks
    Ian

    Hi  Ian,
    Welcome to the community, and thanks for the post.
    The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    After that check if the issue get resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Unread and read mail not showing in Mail after upgrading to Yosemite

    Hi there,
    I recently upgraded to Yosemite.
    In the Mail app, mail is not showing up properly. I have unread mail, which is not showing up, despite me refreshing or sorting by unread first, and even an email I read this morning on Chrome isn't showing up, as you can see by screenshots.
    How do I fix this issue?

    Hi,
    In Mail > Mailbox dropdown menu, try clicking on Rebuild at the bottom.

  • Sd card reader does not show up as a external hard drive any were on my mac

    i have a sd card reader that is run through usb. i plug it in whit my card in it that has files on it but the driver does not show up any were not on the desktop not any were ive gone through the trouble shooting on apples sight but no luck. any one have a idea?
    the weird part about it is that it worked a few weaks ago no problem like i would just plug it in and it would show up on my desktop

    It seems that Intel Macs have problems seeing (the media in) some USB storage devices.
    For example I have a Zynet CR-T1-U28 8-in-1 memory card reader. It works A-OK on an old Powerbook running 10.3.9, and on several PPC-based newer machines running 10.4.10. The cards I've tried in it mount immediately and show up on the desktop (and iPhoto starts automatically if appropriate).
    However none of the FAT-formatted cards I've tried will mount on any Intel-based machine I've tried it on (all have been running 10.4.10).
    Here's how it shows up on my Macbook:
    USB Storage Device:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Generic
    Product ID: 0x3260
    Serial Number: 20030903213338562
    Vendor ID: 0x0aec
    And here's how it shows up on the old Powerbook:
    USB Storage Device:
    Capacity: 60.75 MB
    Removable Media: Yes
    Detachable Drive: Yes
    BSD Name: disk1
    Vendor Name: Generic
    OS9 Drivers: No
    Product ID: 12896 ($3260)
    Speed: Up to 12 Mb/sec
    Bus Power (mA): 500
    Serial Number: 20030903213338562
    Interestingly one kind of card I've tried, a Sandisk M2 card, the 64 MB card shown on the powerbook, mounts A-OK when it's in my Z710i phone and is connected via USB to the macbook. At first I thought the card reader could be at fault, but given the number of (admittedly vague) reports I've seen here today about similar problems with other devices I'm more inclined to blame some driver or kernel problem on Intel macs.
    The following showed up for the first time ever in the console log during today's test to get the System Profiler data:
    Jul 22 14:27:17 macweird kernel[0]: USBF: 773285.286 IOUSBCompositeDriver[0x60c0c80](USB Storage Device) GetFullConfigDescriptor(0) returned NULL

  • Reading pane not showing up in email on ipad

    The reading pane of my email is not showing up on my iPad how do I fix it?

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • LSMW - Read Data not showing in Converted Data

    Hi,
    I am using LSMW to load data from a flat file (via recording).  I have it working except I have one issue.  When I display the data in read data all fields are showing.  No errors popup when I select convert data.  When I select display converted data the last few fields are missing.  Any ideas why or how to fix this?
    Any help is appreciated as I do not know how to proceed.
    Thanks,
    Annette
    Edited by: Annette Ameel on Dec 4, 2008 5:37 PM

    HI Bush,
    Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem

  • Adobe Reader Control not showing in COM tab of Toolbox Items in Visual Studio

    This is my first experience to work on C# and Visual Studio. I have a task to show PDF document on a window form. After reading tutorials and following some examples I have decided to add the 'Adobe Reader Control' in my toolbox and use that control on my form. The problem is that I cannot able to add that control on my toolbox because "it is not showing in COM tab of toolbox items. To clarify just see the red lined component in image that is NOT showing on my component list".
    I have Adobe Reader 11 installed on my machine.
    I am using Visual Studio 2005.
    I am using Windows 7 64-bit OS.
    In my project I have changed the architecture from 'Any CPU' to 'x86'
    Any ideas what can be the issue, why it is not coming on the list?
    This is my first post on this forum. Do point me out if i miss any forum guidelines.

    I have the same problem!  I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
    Does registering unlock something?
    Help please!!

  • Sony Reader - books not showing up in Borrowed folder

    Hi, I'm having tremendous difficulty getting Digital Editions to work properly with my Sony Reader.  When borrowing books from the library, they often do not show up at ALL in Digital Editions or, when they do, they remain only in main "library" folder and do not ever show up in the "borrowed" folder.   I'm hoping this is a simple error I've made, but I'm seriously stumped and ready to toss the thing, lol.
    Thanks for any help you can offer.
    Kat

    ADE2.0/2.0.1 does not work correctly with Sony ereaders when using Overdrive library books.
    v1.7.2 works fine for me with my Sony and library books.
    ~~~~~~~~~
    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • Any compatible ebook reader for N8?

    Hi,
    Are there any Ebook reader that is compatible to N8?

    you can try "ZXREADER2" and Foliant, but im having trouble getting the compatible files so if you figure it out lemme know please
    If you found this post or any other psot helpful please press the green kudus star

  • Why the adobe reader can not show Chinese word

    Hi All,
    i am using WinXP SP2, CFMX7 version 7.0.1, MySQL and the
    latest version of report builder.
    i wish to do a report which can show chinese word and english
    word as well. However, the report can only show english and the
    report will replace '?' in every chinese character. Why and how to
    solve it?
    The CF can insert chinese charater into DB.

    [email protected] wrote:
    > Dear Paulh,
    >
    > no font can display chinese.
    > Where should i trun on identity-H? i dint see.
    preferences or simply press the F8 key.
    > when i enter chinese character into my DB, the cf able
    to catch and display on
    > the screen. BTW, if u insert chinese character within
    <cfoutput>#??#</output>
    > , an error msg will display. If u insert like this
    <cfoutput>??</output>, it
    > will display as '??'
    not following you.

  • SD/SDHC/SDXC/MMC/MS/MS Pro card-reader slot not showing up in windows explorer.

    I have a Lenovo IdeaCentre, purchased only four weeks ago.  It product family is IdeaCentre k410, machine type 10089.  Anyhow, the problem is: I inserted a microSD / microSDHC, both of which seem to fit into the slot fine, though neither registers under anywhere in windows explorer, neither in the root of C://, nor in any of the subdirectories, or on the main listing of mounted file systems.  I used the Lenovo Driver Updater and re-installed the SD Card Reader driver, to no avail.  Any help would greatly be appreciated.  As well, the computer runs Windows 8, which has some features I'm unhappy with, and although this is not a windows forum and I don't mean to create a thread that deviates from lenovo-specific topics, I was wondering if there is anything in either the machine architecture or the software of Windows 8 that could hinder m in installing a dual-boot system so that I might have the option of running a variant of linux as a sub-operating system, as I did with windows XP.?????  OK any help at all would be so greatly appreciated, thank in advance.  I really want to be able to retrieve some writing files I have stored in that micro SDHC card.  As another aside, does anyone know the max limit of RAM this computer can take and if it is DDR or some other type?

    hi BrokenHalo,
    Welcome to the Lenovo Forums.
    Regarding your questions:
    1. When you inserted the SD card, do you hear a sound that a device is inserted and under Device Manger, do you see a Card Reader?
    If not, try to:
    a. boot intto the BIOS by pressing F1, load defaults by pressing F9 then press F10 to save and exit BIOS.
    b. Reseat the front panel connectors (see page 23 of the hardware maintenance manual)
    2. To install linux (i.e. Ubuntu), see if you can install Ubuntu via UEFI. If you're unable to do so or if you want to install other OS, try to:
    a. Boot into the BIOS by pressing F2 and set the following settings below 
    UEFI Boot Mode = Legacy
    Secure Boot = Disabled  (if applicable)
    CSM = Disabled /  Legacy or Other OS (if applicable)
    OS Optimized Default = Disabled or Legacy (if applicable)
    b. When finished, press F10 to save and exit BIOS then try to install Ubuntu via Wubi or insert your Windows installation disc to install a different OS.
    3. As per this pdf data sheet, the Lenovo K410 has a max RAM of 8GB PC3-12800 1600MHz DDR3  but Crucial reports that this unit can take up to 16GB PC3-12800 1600MHz DDR3 - check this site.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • The terms of aggreement screen after downloading A. Reader is not showing up to click and agree ....where is it?

    I downloaded the latest Reader version and the screen that is last where you agree to the terms, click in the little box and then agree isn't showing up and it is the last step in activating and i am stuck until i figure it out.....help!

    What is your operating system?
    Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

  • Message: read status not showing....

    I used to send sms and the status of the message always appear either "delivered" or "read at.." But now it's always showing only "delivered".... What happened? Can anyone help?

    SMS (green bubbles) has neither delivered reports on an iPhone. Only iMessage (blue bubbles) does. If you send an iMessage it will always give you a delivered report. However, it will only give you a read report if the recipient has that featured enabled in Settings>Messages>Show Read receipt.

  • Adobe pdf reader do not show comments ?

    Cannot see comments on pdf file, neither online or on HDD. But my classmates can do that with the same document.
    What is the problem ?
    I have latest Adobe Reader version, Windows 7 64 bit.

    They do assure me that they are using the 32-bit version of IE.  I think the add-on doesn't show at all in the 64-bit version.

Maybe you are looking for

  • Error in creation of materialzed view.

    Hello All, I am trying to create a materialized view on a pre-built table. But the MV does not get created and gives an error ORA-12014. Following are the codes for MV logs and MV I am using: CREATE materialized VIEW log ON table_1 WITH rowid, sequen

  • Cant ping inside hosts from client vpn. Think its a NAT issue

    Hello all, I am running into what I think is a NAT/nat exclusion issue with an IOS IPSEC VPN. I can connect to the VPN with the cisco IPSEC VPN client, and I am able to authenticate. Once I authenticate, I am not able to reach any of the inside hosts

  • Agent determination in price variance workflow

    Hi all, I am facing some problem in workflow, can any one help me. for determing the agent in case of price variance in invoice we are using the rule 009000010(object type T024 is assigned). Can any one tell me how this determines the agent based on

  • File size problem between Acrobat 8 and 9

    When I print to a PDF from Acrobat 8 I get a file size that is slightly larger than the original PDF file size.  Example a 1.6 mb file becomes a 1.7mb file.  When I print the same file in Acrobat 9 with the same settings (to my Knowledge) (setting =

  • How to record generated sound to a file ?

    I have a program that can generate sound, I can hear the sound sequence from my headphone, now I'm trying to save the generated sound to an .au file, it should have a few seconds of sound, but instead I just heard a short beep, seems it didn't record