My compiled program crashes after first run (LabVIEW 2009)

I have a compiled program created with LabVIEW 2009 that on the first run after the computer is re-booted will work fine but after shutting down the program it will not run properly.
The program uses a compiled launcher to dynamically activate a set of VI's containing Queue Driven State Machines (QDSM). On subsequent program starts the launcher module comes up fine and its progress bar shows that it is launching each of the VI's. Once the launcher is complete it removes itself from memory leaving the dynamically launched VI's running. The subsequent launches which fail the main user interface VI pops up barely long enough for the observer to see (if at all) then shuts down. The program is then gone from memory as far as I can tell. There are no processes in memory or anything.
Additionally, the when I try to run the installed version of the exe on a computer that has the 2009 development environment installed I get this behavior consistently with a successful run even once.
In both cases my program does not throw any errors (which are logged) nor does the runtime engine generate any that I can see. Also, when I run my program in the development environment the program does not behave this way. It has no problems at all.
I have used this style of architecture before in LV8.6 with out any problems. Can anyone suggest some possible solutions or even some debugging tips? I have never had a problem that I could not duplicate in the development environment so I am unsure how begin attacking my issue.
Thanks for any help.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!
Solved!
Go to Solution.

I have solved the problem I think (at least as far as testing to this point has revealed). After I added in the ability to log the states passed to the QDSM's, I was able to determine that the program was "crashing" after I dynamically closed the front panel of the launcher. My program was designed to close the front panel of the launcher then pop-up the front panel of the main UI. My EXE is built on to contain the launcher with my other QDSM files being maintained externally in specific directories. What appeared to be happening is that when the launcher closed its front panel and before the UI opened up the run-time engine would decide since there were no windows open it would close itself down. This is my supposition about what may be happening any way. I modified my code to changed the launcher window to hidden and delay for 1/2 a second to give the main UI a chance to start fully running. This fixed the problem, or at least worked around it. If someone out there can explain to me exactly what is happening I sure would appreciate it.
Thanks for all the help those of you who responded. Your advice was very beneficial and certainly led me to a resolution faster.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Similar Messages

Various programs crash after upgrade to 10.6.4

Various programs crash after upgrade to 10.6.4 but only late in the day / evening. There seem to be no crashes early in the day.
After a reboot the problem is fixed and things seem to work OK.
Might this be some kind of memory-related issues?? Programs not releasing memory until eventually there's nothing left?
I'm a Windows guy until recently so am not up to speed with Mac software / hardware yet.
Any suggestions?
Thanks.

Hi, I am facing major instability in MS Office for Mac 2008 after the 10.6.4 upgrade. Programs (Word, Excel, PowerPoint), just crash randomly. Mostly when opening existing Office documents but there is no fixed pattern.
Tried Office auto update but no joy.
Any suggestions
Here is the MS Error log
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXCBADACCESS
Date/Time: 2010-07-23 20:37:36 +0530
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 12.2.5.100505
Crashed Module Name: libTrueTypeScaler.dylib
Crashed Module Version: unknown
Crashed Module Offset: 0x00009bd5
Blame Module Name: libTrueTypeScaler.dylib
Blame Module Version: unknown
Blame Module Offset: 0x00009bd5
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Operating System Information
Operating System: Mac OS X 10.6.4 (Build 10F569)
CPU: Intel Core Duo, Number: 2, Speed: 2147 MHz
gestaltPhysicalRAMSize err = 0, result = 2047 MB
gestaltSystemVersion err = 0, result = 0x1064
Screen: 1440 x 900, depth = 32, ltbr = 0, 0, 900, 1440
Microsoft Application Information:
Error Reporting UUID: 0B338D65-7DAA-4B4A-B8B1-0C17F587C24A
Time from launch: 0 hours, 14 minutes, 46 seconds
Total errors on this client: 40
Does this help at all ?

LabVIEW program crashes after running for few hours

Hello,
I am doing some experiments at the moment which are supposed to last for 18 hours.
Basically, I use a LabVIEW program to control a power supply through a LabJack U6 DAQ. I am currently using LabVIEW 8.5 on Windows 7.
In order to do that, I use a laptop where everything has been disabled such as power management settings, network access is off, windows updates are also off...
As far as I know, the computer can't turn into sleep mode or just shut down (I'm a 100% sure of that actually).
But last night, I started an 18 hours experiment at 5 pm, and when I came in this morning, the program shutted down by itself. Fortunately, the power supply is still providing the voltage I want, but I can't figure out why the program crashes.
When I start the experiment, it also automatically starting saving data in a spreadsheet file (I guess the size of the file should be 36 MB), so it might be a problem of memory access or something.
I really don't know what could have cause this crash, does someone have an idea?
I saw some other threads similar to my problem but I am not running an executable, I am running the front panel directly from the editing mode.

Hi,
thank all of you for your quick answers!
@Josborne : I do not have an error handling in my program. Actually you can look at my program in the attachment file. This is my first LabVIEW program so I've never dealt with error in and error out function... Moreover, what is a log file exactly?
@Johnsold : Yes, I am building an array continously growing over time. Actually, my program stops saving data when you hit the "STOP" button, it doesn't write into a spreadsheet file through a period of time, that is something I eventually need to correct.
@LabJackSupport : I can try to reduce my time step, so far it's 100 ms. I have a problem with disconnecting the USB cable from the computer though : for no reason, if I just unplug the connection between the LabJack U6 and the computer, my power supply will just go providing 157 Volts! And for my experiment, this is something we don't want to have so we just leave it as it is now. Disabling some part of the program is a good idea, I can try it
Thank you for your answers
Attachments:
Control Software.vi ‏511 KB

Pages crashes after first synchronization

Hi, everyone.
Last night I synchronized for the first time my home and office Macs using Leopard and my .Mac account. Since then, my office copy of Pages crashes shortly after I start using other programs. The screen simply dissapears. The program is apparently still running but there's nothing on the screen. The only way for Pages to work again is restarting the computer, and again it crashes when I start using other programs.
I tried restoring Pages using Time Machine. I also tried deleting iWork and reinstalling from the disk. Even tried updating the program. The same thing happens... Pages is fine until I start opening programs.
I use Pages all the time, so this is really frustrating. Your help would be truly appreciated.
JAMM

Lost is lost.
Buy it from the Mac App Store. It is not that expensive and you will then get all updates automatically and be able to install it on several Macs so long as you use the same Apple I.D.
In future I suggest you protect your investment in software by buying an installer USB drive and adding all your installers along with purchase records and serial numbers on that.
Peter

8.2 DSC : Program Crash After 24 Hours on 'Read Traces.vi'

Hello,
I am chasing a problem in a LabVIEW 8.2 project. The project uses DSC and on a trending screen, I use the 'read traces' VI to read traces from the Citadel database to display on trends.
After about 24 hours of running, the program crashes with "Error 1025". The dialog box reads: "Error 1025 occurred at Tag \\My computer\UPP Tags\Hy-6022_Actual: Open VI Reference in CTL_hdProxyManager.vi->HIST_ReadNumericTraceCORE.vi->HIST_ReadNumericTraces.vi:2->ReadTraces(Numeric).vi:1->!Dash Reactor.vi"
Under "Possible Reason(s):" there is a lot of text, starting with "LabVIEW: Application Reference is Invalid"
I don't seem to be reading an inappropriately large amount of data (in the last occurrence of the error, there were only about 750 data points per trace displayed on the graph, representing about 1 hour of data. The program is running with no operator interaction during this time. The application is updating the graph and therefore running the "read traces" VI about once every 4 seconds. I have 175 shared variables. The PC is a very new, fast one . Let me know what other data you might need.
I attached the main VI (there are a lot of support VI's too, but at least you can see the general idea), along with BMPs of the location of the error on the block digram and the error dialog box.
Michael
Michael Hampson
President
XL Automation, Inc.
Attachments:
ReadTracesError1.zip ‏195 KB
!Dash Reactor.vi ‏1837 KB

Hi Michael,
This was reported to R&D (# 4258E9IQ) and was fixed in LabVIEW 8.2.1. Upgrading to that version should fix the problem you are facing.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

SSRS 2012 Reports freeze after first run in IE 11

Hello,
We have just recently upgraded/migrated from SSRS 2008R2 to SSRS 2012 sp2 (Windows 2012 R1).
We have found one report so far when using IE 11 that after the first run from the client side Internet Explorer freezes. The report normally takes 4-5 seconds to run. I have waited an hour and the report has not resolved.
The same report runs fine in Firefox or Chrome, even after multiple runs. It also continues to run fine from our SSRS 2008R2 server from IE 11.
I have tried private browsing and it still only runs once and will not run again. I have tried compatability mode and it will not run either. I have also noted that it will crash our ERP system (java based) when it is running at the same time
in IE as when I run this report. Other reports seem to work fine.
The report is simple, it is just a report of subscriptions from ReportServer. There is some XML parsing in there though. It is the only difference that I can see in all the other reports on the system. Oh, the report runs fine from
Visual Studio 2012. I have redeployed, and no luck yet.
Here is my query
WITH [EMAIL]([SubscriptionID], [EmailLine]) AS
SELECT I.[SubscriptionID],
         I1.rows.value('Value [1]', 'VARCHAR(MAX)') AS [EmailLine]
FROM    (
          --if the Subscription is an e-mail, get the XML fragment which contains the Email line
          SELECT S.[SubscriptionID],
                  --add a "root" element to create well-formed XML to the "ExtensionSettings"
                  --(in case it's NULL)
                  CONVERT(XML, N'<Root>' + CONVERT(NVARCHAR(MAX), S.[ExtensionSettings]) + N'</Root>') AS [ExtensionSettings]
          FROM    ReportServer.dbo.[Subscriptions] S WITH (NOLOCK)
          WHERE   --only get e-mail subscriptions
                  S.[DeliveryExtension] = 'Report Server Email'
         ) I CROSS APPLY
             --pull out elements in the "ParameterValues/ParameterValue" hierarchy
             I.ExtensionSettings.nodes('/Root/ParameterValues/ParameterValue') AS I1(rows)
WHERE   --only get the Subject field
         --I1.rows.value('Name [1]', 'VARCHAR(100)') = 'Subject'
         I1.rows.value('Name [1]', 'VARCHAR(100)') IN ('TO', 'BCC','CC')
--get subscription data for all users
SELECT   replace([EMAIL].[EmailLine], '@plu.edu','') email_line,
        --internally put-together description of subscription
--        S.[Description],
        --user-friendly message for what happened the last time the subscription ran
        --which may be "New Subscription"
        --report path and name
        C.[Path], C.[Name],
        --start date and end date for schedule
        SC.[StartDate], SC.[EndDate],
        --when the subscription was modified
        S.[ModifiedDate]
FROM    --actual subscriptions
        ReportServer.dbo.[Subscriptions] S WITH (NOLOCK) LEFT OUTER JOIN
            --report details from Catalog
            ReportServer.dbo.[Catalog] C WITH (NOLOCK) ON
                S.[Report_OID] = C.[ItemID] LEFT OUTER JOIN
            --Users (owner)
            ReportServer.dbo.[Users] [U1] WITH (NOLOCK) ON
                S.[OwnerID] = [U1].[UserID] LEFT OUTER JOIN
            --Users (modified by)
            ReportServer.dbo.[Users] [U2] WITH (NOLOCK) ON
                S.[ModifiedByID] = [U2].[UserID] LEFT OUTER JOIN
            --Subscription Schedules
            ReportServer.dbo.[ReportSchedule] RS WITH (NOLOCK) ON
                S.[SubscriptionID] = RS.[SubscriptionID] LEFT OUTER JOIN
            --Schedules
            ReportServer.dbo.[Schedule] SC WITH (NOLOCK) ON
                RS.[ScheduleID] = SC.[ScheduleID] LEFT OUTER JOIN
            --Subjects CTE from e-mail subscriptions
            [EMAIL] ON
                S.[SubscriptionID] = [EMAIL].[SubscriptionID]
WHERE EmailLine is not null
and EmailLine like '%' + @Email + '%'
and C.[Path] like '%' + @Path + '%'
order by C.[Path]
The other observation that I have is that my CPU utilization goes up from 25% to over 50% when I kick this off. So, it is definitely getting confused about something...
Thank you for your feedback,
Chris

Brad,
I am not sure how to attach the rdl, so here it is inline.
The one thing that is strange is that my test SSRS 2012 SP2 server (Windows 2008R2) the report works. However, their is a difference in the OS. The production server is Windows 2012
The report works in Visual Studio, it works in Firefox, it works in Chrome. Just not in SSRS 2012 SP2 on Windows 2012.
Thanks
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="table1">
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>4.125in</Width>
</TablixColumn>
<TablixColumn>
<Width>2.75in</Width>
</TablixColumn>
<TablixColumn>
<Width>2.625in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.18in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Email Addresses</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<ZIndex>11</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Path</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>10</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Name</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<ZIndex>9</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox4">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Start Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox4</rd:DefaultName>
<ZIndex>8</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox10">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>End Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox10</rd:DefaultName>
<ZIndex>7</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox13">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Modified Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox13</rd:DefaultName>
<ZIndex>6</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
<TablixRow>
<Height>0.18in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="email_line">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!email_line.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>email_line</rd:DefaultName>
<ZIndex>5</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Path">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Path.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Path</rd:DefaultName>
<ZIndex>4</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Name">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Name.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Name</rd:DefaultName>
<ZIndex>3</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="StartDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!StartDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>StartDate</rd:DefaultName>
<ZIndex>2</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="EndDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!EndDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>EndDate</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="ModifiedDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!ModifiedDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>ModifiedDate</rd:DefaultName>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<FixedData>true</FixedData>
<KeepWithGroup>After</KeepWithGroup>
<RepeatOnNewPage>true</RepeatOnNewPage>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Group Name="table1_Details_Group">
<DataElementName>Detail</DataElementName>
</Group>
<TablixMembers>
<TablixMember />
</TablixMembers>
<DataElementName>Detail_Collection</DataElementName>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>email</DataSetName>
<Height>0.36in</Height>
<Width>11.99999in</Width>
<Style />
</Tablix>
</ReportItems>
<Height>0.36in</Height>
<Style />
</Body>
<Width>12in</Width>
<Page>
<PageFooter>
<Height>0.25in</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<ReportItems>
<Textbox Name="textbox8">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Globals!ReportFolder & "/" & Globals!ReportName & "/" & User!UserID</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<Left>8in</Left>
<Height>0.25in</Height>
<Width>4in</Width>
<Style>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Style />
</PageFooter>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="SQL_ReportServer">
<DataSourceReference>SQL_ReportServer</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>77e94914-07c8-421a-b785-a126cad0d6ac</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="email">
<Query>
<DataSourceName>SQL_ReportServer</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Email">
<Value>=Parameters!Email.Value</Value>
</QueryParameter>
<QueryParameter Name="@Path">
<Value>=Parameters!Path.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>WITH [EMAIL]([SubscriptionID], [EmailLine]) AS
SELECT I.[SubscriptionID],
I1.rows.value('Value [1]', 'VARCHAR(MAX)') AS [EmailLine]
FROM (
--if the Subscription is an e-mail, get the XML fragment which contains the Email line
SELECT S.[SubscriptionID],
--add a "root" element to create well-formed XML to the "ExtensionSettings"
--(in case it's NULL)
CONVERT(XML, N'<Root>' + CONVERT(NVARCHAR(MAX), S.[ExtensionSettings]) + N'</Root>') AS [ExtensionSettings]
FROM ReportServer.dbo.[Subscriptions] S WITH (NOLOCK)
WHERE --only get e-mail subscriptions
S.[DeliveryExtension] = 'Report Server Email'
) I CROSS APPLY
--pull out elements in the "ParameterValues/ParameterValue" hierarchy
I.ExtensionSettings.nodes('/Root/ParameterValues/ParameterValue') AS I1(rows)
WHERE --only get the Subject field
--I1.rows.value('Name [1]', 'VARCHAR(100)') = 'Subject'
I1.rows.value('Name [1]', 'VARCHAR(100)') IN ('TO', 'BCC','CC')
--get subscription data for all users
SELECT replace([EMAIL].[EmailLine], '@plu.edu','') email_line,
--internally put-together description of subscription
-- S.[Description],
--user-friendly message for what happened the last time the subscription ran
--which may be "New Subscription"
--report path and name
C.[Path], C.[Name],
--start date and end date for schedule
SC.[StartDate], SC.[EndDate],
--when the subscription was modified
S.[ModifiedDate]
FROM --actual subscriptions
ReportServer.dbo.[Subscriptions] S WITH (NOLOCK) LEFT OUTER JOIN
--report details from Catalog
ReportServer.dbo.[Catalog] C WITH (NOLOCK) ON
S.[Report_OID] = C.[ItemID] LEFT OUTER JOIN
--Users (owner)
ReportServer.dbo.[Users] [U1] WITH (NOLOCK) ON
S.[OwnerID] = [U1].[UserID] LEFT OUTER JOIN
--Users (modified by)
ReportServer.dbo.[Users] [U2] WITH (NOLOCK) ON
S.[ModifiedByID] = [U2].[UserID] LEFT OUTER JOIN
--Subscription Schedules
ReportServer.dbo.[ReportSchedule] RS WITH (NOLOCK) ON
S.[SubscriptionID] = RS.[SubscriptionID] LEFT OUTER JOIN
--Schedules
ReportServer.dbo.[Schedule] SC WITH (NOLOCK) ON
RS.[ScheduleID] = SC.[ScheduleID] LEFT OUTER JOIN
--Subjects CTE from e-mail subscriptions
[EMAIL] ON
S.[SubscriptionID] = [EMAIL].[SubscriptionID]
WHERE EmailLine is not null
and EmailLine like '%' + @Email + '%'
and C.[Path] like '%' + @Path + '%'
order by C.[Path]</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="email_line">
<DataField>email_line</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Path">
<DataField>Path</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Name">
<DataField>Name</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="StartDate">
<DataField>StartDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
<Field Name="EndDate">
<DataField>EndDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
<Field Name="ModifiedDate">
<DataField>ModifiedDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="Email">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Email Like (e.g allen):</Prompt>
</ReportParameter>
<ReportParameter Name="Path">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>%</Value>
</Values>
</DefaultValue>
<Prompt>Path like (e.g Advancement):</Prompt>
</ReportParameter>
<ReportParameter Name="Report_Parameter_2">
<DataType>Boolean</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Parameter OK?</Prompt>
</ReportParameter>
</ReportParameters>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>811078db-33dd-4670-9df4-be748e9ec2ef</rd:ReportID>
</Report>

All programs crashing after re-installing OS X

Hi all,
I've recently made the jump over to Mac form Windows and invested in a new 17' Macbook Pro. Sadly today someone decided to play a little trick on me and convinced me to run the Sudo FM command in Terminal and I lost my OS.
After re-installing OS X i'm now having problems with my programs. I've reinstalled the Apps disc but every program i Launch seems to crash after a few seconds (i'm yet to find a program that doesn't crash).
I have a time machine that has backups, but i presume that's not saving any program data, just my personal files, so i guess thats not going to help. Can anyone suggest how I can get around this?
Many thanks.

How did you reinstall? I'm guessing that something wasn't done properly... maybe you installed on top of remnants of the old OS (IIRC, even "sudo rm" can't remove files that are in use) and something is screwed up because of that.
Time Machine certainly is capable of backing up the entire hard drive, including system files, apps, etc., and does so by default. If you have an up-to-date Time Machine backup, and you hadn't excluded anything from the backup, you can restore from that. To do that, see item #14 on the [Time Machine FAQ|http://discussions.apple.com/thread.jspa?threadID=1964018].

Most programs crash after latest update..

I just ran Software Update. It had all of the iApps, Quicktime, and the latest Security Update in it.
Then I rebooted. Next I installed the latest Xcode.
Once that finished I proceeded to run my regular apps, Mail, Adium, etc.
Mail starts, but after some amount of time (10 or 20 seconds) crashes displaying crash reporter.
Adium will run until you double-click a contact to open a message window.
So, not much else will run. Camino's fine, Opera seems Ok. But Safari crashes after a few seconds. I even went and manually downloaded the latest Security Update installer, and even it crashes!
Disk Utility seems to work fine, thankfully. I ran Verify Disk (it's Ok) and Repair Permissions (it fixed a couple of minor directory permissions) and I'm still SOL.
I'm an ex Windows guy, had the Mini just about a year now - so I'm pretty clueless on what to do next. Any help much appreciated!!!
Thanks,
Steve

hi steve
at this point since this is a system wide issue you may want to consider archiving and installing your operating system. http://docs.info.apple.com/article.html?artnum=107120. this helps in a lot of cases like this. remember to repair disk beforehand, and do software updates. however, do not do the last update which created the problem. may get everything back to normal. good luck.

Programs crash after 10.4.9/10.4.10 update...

I have an Intel MacPro 2.66GHz machine with 2 gigs of ram. Since installing the 10.4.9 update (and also skipping over 10.4.9 and installing the 10.4.10 combo updater)...
1. QuarkXPress 6 and 7 crash when I trying to pull down the "Window" menu.
2. Entourage 2004 crashes when composing an email and I try to select a font from the font popup menu in the new email composition window.
3. Photoshop CS2 crashes on startup.
4. FlightCheck 6 crashes on startup.
5. AdiumX (chat program) crashes when I try to access the "Status" menu either in the menubar or in the buddy list window.
Temporarily disabling a majority of the fonts installed have allowed some of the above problems to go away. However #1, #2, and #5 still occur. EVERYTHING was running just fine prior to the 10.4.9 update.
I have tried reinstalling said apps, repairing permissions, running disk diagnotic apps like DiskWarrior, removing font caches files with FontNuke, removing program preference files/folders, and these problems are still happening. Can someone clue me in as to what has happened?
BTW, these same problems have also occurred on a totally separate Intel machine. I also have several PowerPC machines that are comparably configured that were updated to 10.4.9/10.4.10 and are NOT exhibiting the above problems.

Hi Carolyn,
I found the answer. Several months before installing to the 10.4.9/10.4.10 updates, I had removed the AquaKanaRegular and AquaKanaBold fonts from the /System/Library/Fonts folder. This because old information I had said these two fonts were not necessary.
However, on page 74 of the November 2007 Macworld magazine, the article shows that those two fonts are indeed necessary.
Once I restored those two fonts to their rightful place, my apps have stopped crashing. Yayyy.
Thanks,
Jon

Software Update crashes after first update install after 35 pass Format.

Ok so I have a powerbook G4 1.67 and a G5 1.5. Both have been acting weird so I reformatted and installed tiger on both. The powerbook has its own install disk and the Desktop I use the store bought version of Tiger. I did a zero all data on the Powerbook and a 35 Pass Format on the desktop. Immediately after installing the first set of Software updates both systems independently and at different times wont accept updates. Software update crashes after showing what updates are available. If I uncheck 10.4.10 on the first update and then try to manually install 10.4.3 after the first software update and restart it goes to the second installation window and freezes. There has to be a bad update in Itunes or something. Does anyone know what Is going on? I am getting really bad conspiracy vibes about this considering were a week away from a new release.

If you haven't installed any third party software,
and are using a version of Tiger that is known to work on that Mac (system specific disks from other Macs do not work all the time),
then it sounds like you have a hardware issue with your machine which installing a new operating system won't help. An erase and install should eliminate bad preferences, bad cache, bad drivers, corrupt files, as long as nothing third party is attached the machine other than a display.
Third party keyboards, mice, and other peripherals can all contribute to problems. Displays won't contribute unless they are underpowered in their USB or Firewire ports for the peripherals attached through them (if they are Apple displays with USB and Firewire).

Program crashes after 10 seconds

Hi when i start final cut pro X i can see all the normal screens, but after +- 10 seconds, the program crashes.
It is the trial version, ans i have already reinstall my OSX mountain lion 10.8.4
It doesn't help
liefst in het nederlands aub, en anders ga ik mijn beste engels moeten boven halen
greets mario

You need to give detailed information about your computer. You can also try the usual delete preferences http://www.digitalrebellion.com/prefman/

All programs crash after Time Machine restore

After noticing that Photoshop hung the system every time I tried to open it, I ran a disk utility scan on my system disk. It came back that my hard drive was bad. I purchased a new hard disk, installed it into my Mac Pro, booted from my Snow Leopard CD, and tried to restore from my Time Machine backup to the new hard disk.
After restoring, my system boots but every program crashes shortly after I open it. If I open Dashboard it crashes after a few seconds... Mail... crashes after a few seconds. All of these programs worked fine on my "bad" hard drive. The only apparent problem was that attempting to open Photoshop would hang the system.
My original hard drive that was backed up to Time Machine was 300 GB. My new hard drive that I'm attempting to restore to is 2 TB. Does this matter?
Any ideas on how to get a stable system restored?

Ack226 wrote:
It came back that my hard drive was bad. I purchased a new hard disk, installed it into my Mac Pro, booted from my Snow Leopard CD, and tried to restore from my Time Machine backup to the new hard disk.
How did you format the new drive?
How did you do the restore? Did you do a full system restore, starting with your Snow Leopard Install disc? If not, what?
Have you done a +*Verify Disk+* and +*Repair Permissions+* on your internal HD, via Disk Utility?
It's possible that as your disk was failing, it corrupted things on your system, and Time Machine backed those changes up, so the restore brought them back. If everything else checks out, you might want to try the restore again, but select an earlier backup.

Program crash after editing individual tracks

When I'm recording a multitrack music project in Soundtrack Pro, I often double-click an individual track to work on it as a stereo file. Lately, almost without exception, after I've worked on an individual track, and save it, the program crashes. The error message says: "An Unexpected Problem . . . CNSExceptionWrapper type 16777216 . . . could not parse the file URL 'file://localhost/Volumes/RAID/TemporaryItems/folders.501/TemporaryItems/..."
I've tried resetting the locations for Temporary Items to the Soundtrack Pro Temporary Items folder on my hard drive, which has plenty of free space. But I'm still having the problem...suggestions?

Utilizing all the cores and all the memory is not what you are after. You have to leave resources for other processes and you have to make sure that your system has enough resources to do things like decode footage in the background and process the effects you are setting up in AE. Some video codecs do not respond well to MP rendering so you may have to turn that off or transcode your footage to something that works.
As Myenium said your question lacked the details necessary to even guess what is going wrong. The best option to troubleshoot your problem is to reset your preferences to the default settings then see if the project works. If it doesn't start exploring things like source footage formats for problems. Then start adjusting your memory and MP settings using the guidelines that Adobe has published for optimizing performance.

Programs crashing after security update 2014-002

I installed the latest security update for Mavericks today and since then I've had two programs crash repeatedly.
In iTunes, when I click on "Add to Library," iTunes shuts down.
In Photoshop Elements 12, when I try to save a photo, the program shuts down.
Has anyone else had similar problems? I can't think of anything else that would be causing this, as it hasn't happened before.
Note: I have a late 2013 Macbook Pro with Retina.

Bump. I'm having a similar issue.
Since installing the latest Mavericks security update, my Retina MacBook Pro (13-inch, Late 2013) has crashed and restarted a minimum of once per day for no apparent reason.

IPod Touch 4G, "Video" program crashes after Update to iOS 4.2

After updating iPod Touch 4G to iOS4.2 the program "videos" just crashes.
Details: I can sync the iPod touch with the computer and the videos reappear on first launch of "videos". All videos play o.k. Second launch of "videos" gives me a white screen for several seconds, then "videos" crashes. Every time I launch it, it keeps crashing.
There are 2 conditions that make them reappear and "videos" runs normally (but only once!):
Method 1: Sync with my MacBook
Method 2: I fully close the program "Videos", then change language on the iPod touch to english (any other language seems to work, too. It's the change that seems to be important). Launching "videos" after that successfully shows all my videos. Second launch and the crash is back. Every time. Until I change the language again.
I tried full restore, and I tried Resetting the iPod, both with no success.
BTW: The Video Files are o.k., I can launch them using playlists and they work just fine.
This is really strange. Can anyone help?
Or, can anyone help how to revert back to iOS 4.1?

Check out the thread I have posted below. I've been having the same problem and have been posting on this thread.
Very annoying problem and it hasn't been solved in the new iOS 4.3 either!!
After two genius appointments, no solution has been offered from Apple, only a new device, which unfortunately came with iOS 4.2 installed, so I couldn't even leave it on the old iOS 3 and not update it. Although having said that, on this device the Video app was working, but only every other time. Weird I know! But now it won't work at all after the newest update... back to square one.
There are work arounds though, as mentioned in the above posts, if you change the music videos into films then they work perfectly.
Strange how it's only Music Vids that seem to cause this problem!?
COME ON APPLE....READ THESE THREADS AND FIX
http://discussions.apple.com/thread.jspa?threadID=2662550&tstart=0&messageID=129 80915#12980915

My compiled program crashes after first run (LabVIEW 2009)

Similar Messages

Maybe you are looking for