My complaints and Questions MP4 M4V video files and other complaints

My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, James

Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

Similar Messages

  • Error importing mp4/m4v video file format on adobe premier cs4

    Hi i recently installed ADOBE premier cs4 on my pc.
    But once i imported the mp4/m4v video file it wont let me drag it to the timeline.
    and the videos appear to be black screen but the sound is there. I already installed the Klite codec and quicktime but still it wont work
    Here is the screen shot.

    What MJPEG codec do you have installed?
    MJPEG http://forums.adobe.com/thread/730396
    - problems with Samsung codec http://forums.adobe.com/thread/699493
    - and Fuji http://forums.adobe.com/thread/1015922

  • Is it possible in java to extract audio from video file and ...

    Hi,
    Is there any API in java for creating DVD video from Normal TV and extract audio from video file and convert MP3 to WMA file. What about java Media Framework and Java 3D API?
    If it is notpossible in java which will be the next option. Vc++?
    Please help me.
    Thanking in advance.
    From,
    Vinod A

    lol
    If all you want is to create a backup of some file you can do:public class Foo
        public static void main(String[] args) {
            Foo f = new Foo();
            f.createBackup("something.xls");
        public void createBackup(String inFile) {
            FileInputStream in = null;
            FileOutputStream out = null;
            try {
                in = new FileInputStream(inFile);
                out = new FileOutputStream(inFile + ".bak");
                int read;
                while ((read = in.read()) > -1) {
                    out.write(read);
                out.flush();
            } catch (FileNotFoundException e) {
                e.printStackTrace();
            } catch (IOException e) {
                e.printStackTrace();
            } finally {
                if (in != null) {
                    try {
                        in.close();
                    } catch (IOException e) {
                        e.printStackTrace();
                if (out != null) {
                    try {
                        out.close();
                    } catch (IOException e) {
                        e.printStackTrace();
    }

  • Quicktime Update No Longer Plays Any of My MP4 or M4V Video Files!?

    Hi there everyone. I am absolutely desperate to find a solution to my problem now, so I was hoping someone on here might be able to help me out. I have a G4 that I use as a media center via frontrow to play my huge collection of MP4 and M4V video files that are local and streamed from the library on my main intel mac. This has been working fine for some time and I haven't had any problems playing files.
    However, when iTunes 9 came out, I ran software update and updated iTunes and Quicktime to 7.6.4, as well as updating the OS to 10.5.8. As soon as I did this, all the MP4 and M4V files that had worked fine up until that point stopped being playable by frontrow/itunes/quicktime. A lot of these are movies that I bought from the iTunes store, and it will not even play those now. It is definitely not a video format problem. When I try to play them in quicktime, I get the error "file is not a video file". This applies to all old files, plus new ones I have attempted to add. Also, frontrow WILL play video files streamed from my main computer, but not local ones (same files). I did the exact same updates on my main mac, and all the files will play perfectly fine on that machine, it is only this one that won't play.
    I have tried everything I can think of, I have reinstalled both apps several times. I have also checked the System/Library/Quicktime components and they are all intact, exactly the same as on my other machine. Now it looks as though my only option is to start again from scratch and reinstall the operating system - a time consuming option as I do not back up this secondary machine..
    Does anyone have any suggestions of what I can do to fix the Quicktime installation? Any help would be much appreciated.
    Thank you

    Ok well if you want to go about it down and dirty you can try this. Take a file that does copy over correctly, for my purposes I had a Rocky and Bullwinkle episode that if I changed the file extension to .m4v it would add correctly through iTunes. From Terminal search /Volumes/youripodname/iPod_Control/Music/ for any file with the m4v extension and take note of them. Now add the "supported" file through iTunes then after it finishes do another search from Terminal and see which file with an m4v extension wasn't there before. Now from Terminal copy the "unsupported" file over to the same location with the same name. Here's what mine looked like cp /Volumes/harddrivename/Video/MUTEMATH.mp4 /Volumes/youripodname/iPod_Control/Music/F12/SJXB.m4v Now in iTunes change the Info for that file with the "Get Info" menu and your set. Mine now plays a video file that it wouldn't let me add through iTunes after the 9.0 update.
    I'm sure there's a better way and when I figure out a quick script to do this by directly modifying the itunes database I'll try and repost a solution.
    Message was edited by: Eli Barb

  • Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

    Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

    Did the back and forth between PC and Mac file systems screw up my files somehow?
    Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
    By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
    Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

  • After saving project upon reopening one of my video files and it's corresponding audio is red

    After saving project upon reopening one of my video files and it's corresponding audio is red (both are offline).  Attempts at relink result in a warning that the audio will be deleted (which is does when tested).
    This project is based on a multicam sequence (2 video files) and using Pro CC (latest Cloud build).
    Anyone come across this and/or have a solution?  Thanks in advance.

    Appreciate your assistance and guidance Mark.  Yes, I am a newbie on this forum - and fairly new to premiere pro though have used elements since version 4.  I'll answer your leads below.
    First off, some bookkeeping & jargon matters:
    "you reported the file extension (.mts) but not the codec of the video therein. AVCHD?"
    .mts files are Sony AVCHD files.  filmed with Sony NXCAM NXU5 camera.
    "re: the version you're on, rather than simply stating "the latest," it helps to report the exact version numbers as shown in the About box. That not only avoids any confusion today but also aids customers who come upon a thread months from now."
    Version is 7.2.0
    "you refer to "rendering" to a new format. I know that "render" is the right term in some NLEcosystems, but with Premiere we distinguish between rendering and exporting/encoding. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip."
    My bad - I exported/encoded the sequence to a new output clip.
    Now back to our regularly scheduled troubleshooting. Three questions:
    did you start this project in CC7.1 and then update to 7.2/7.2.1 along the way?
    I started this in 7.2.0
    are either of the clips in the multicam sequence spanned?
    I don't know what "spanned" refers to
    I gather that you created the multicam sequence via the new workflow in the Project panel: select the clips, right-click>CreateMulticamSourceSequence. Am I right?
    Correct
    If so, please create a new sequence, set the timeline to insert sequences as individual clips (via the left-most button under the timecode control), add the multicam sequence to the new sequence, and post a screenshot of the timeline.
    Now all of a sudden I am able to open my project file(s) as before with no problems.... very curious. 
    I did this and then could not find my multicam sequence.... so no screen shot... BUT what happened?
    thank you for your guidance with this.

  • M4V Video files suddenly not working in itunes

    I have a couple hundred m4v video files (all created with handbrake) that have been working fine on itunes for ages. Did the upgrades last week for the latest itunes and ios 4.3 on my iphone 3GS and ipad 1 and airplay for the videos was all working fine. Suddenly this evening its all stopped. Within itunes I can't double click or right click play any of the files. Across airplay the devices bring up the movie format not supported error. Video files I have bought from Apple are still working fine though so I don't believe it to be a library/network issue. Has anyone experienced the same thing?
    I can't find anything after doing an internet search to help, apart from the fact that the files may be corrupted, but could they really all get corrupted instantly?
    Any help would be appreciated.
    Thanks!

    Just to clean this unresolved issue up, seemingly the problem disappeared after upgrading to iTunes 9.2.1 (5).
    Thanks!

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • I had this video file and I was trying to flip it to a format that would work with iMovie.  It used to have the Quicktime image with it.  So, I assume it was a QT file.  But, somehow I've changed the file from a video to a folder.

    I had a video file and I was trying to flip it to a format that would work with iMovie.  It used to have the Quicktime image with it.  So, I assume it was a QT file.  But, somehow I've changed the file from a video to a folder.  I've tried to undo the action.  No luck.  I wasn't running my Time Machine.  So, I can't go back.  Help.  It's the only copy of this video.

    I've tried to undo the action.
    How?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    it's the only copy of this video.
    Where did you get the video from?
    From the pic I noticed that the folder is 841.9mb.  What's inside?  Or what happens when you click on it?

  • Imported a video file and there is only audio.

    Imported a video file and there is only audio. It was originally captured from VHS onto a PC. It took over 24 hrs to import the 4.24 GB mpg.
    Is there something I need to do since it was a mpg from a PC?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • 1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I

    1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media)  in order to upload it to a server?
    2.- Is there a Adobe Muse community in spanish language?
    Thanks for your help
      Mauricio444

    Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
    RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as  it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
    Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
    Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
    What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
    If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Cut audio from a video file and edit in an audio editor?

    Using Pre 9 and a Nikon D7000 video file: Is it possible to cut the audio portion of a movie clip (where the audio was recorded in the camera and is part of the import), edit in an audio editor (I like Sony Sound Forge Studio), then paste it back into the clip?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • How to get video file and iTunes Extra to show as one file in iTunes?

    When I purchase a movie in iTunes with iTunes Extras, after the download is finished in the "Movies" and "Genres" view they appear as one file. You click on the cover, it opens, shows the "Play iTunes Extra" button as well as a small Play arrow button next to the title to play the movie directly. Only in "List" view do they appear as separate files.
    How can I achieve that for my own iTunes extra? I tried giving the .ite the same XID as the movie file but that didn't work, they continue to appear as separate files in iTunes and the little play button when expanding the iTunes Extra doesn't work obviously. Anyone can tell me how this is done?

    Ok, I finally figured it out... there is 2 files that play a critical role in this
    first is manifest.xml
    in this file ensure that the library_item type string references the xid for your video file, and it has to be a proper xid. The iAd Producer manual explains how to create one if it does
    example:
    <library_item type="video" local_id="feature" xid="TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC" name="Your Movie"/>
    second file and even more critical is iTunesMetadata.plist. There is a couple of strings in there that lace the iTunes Extra to the film and vice versa
    <key>itemId</key>
    <integer>987654321</integer>
    <key>itemName</key>
    <string>Your Movie - iTunes Extras</string>
    The first is a unique 9 digit number that identifies your iTunes Extra file, the second is the name of the file that should follow the convention "Your Movie Title - iTunes Extras"
    <key>playlistId</key>
    <integer>123456789</integer>
    <key>playlistName</key>
    <string>Your Movie</string>
    This is what ties it back to the movie file, we will come back to it later where in the movie MetaData you need to place this 9 digit string
    <key>xid</key>
    <string>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC_ITUNES_EXTRAS</string>
    This is the convention in how to properly xid your iTunes Extra, it is your movie's XID with "_ITUNES_EXTRAS" added to the end of it
    <key>Name File</key>
    <string>Your Movie - iTunes Extras.ite</string>
    <key>associated-adam-ids</key>
    <array>
    <integer>123456789</integer>
    The first is self explanatory but the second is again this 9 digit number that you will need to place into the meta data of your movie. It is what will make iTunes lace the two files together
    <key>xid-asset-mapping</key>
    <dict>
    <key>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC</key>
    <array>
    <integer>123456789</integer>
    </array>
    <key>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC_ITUNES_EXTRAS</key>
    <array>
    <integer>987654321</integer>
    </array>
    </dict>
    This is the last critical piece, it laces the two files tigthly together. Now the 9 digit number counting down from 9 is part of the unique ID of the iTunes Extra, the 9 digit number counting up from 1 needs to be put into the metadata of your movie. The annotation type for this is "contentID".
    That's pretty much it. If you did it right your files will now appear as one file in cover view just like a movie bought in the store.
    The easiest to do this right is to grab the manifest.xml and iTunesMetadata.plist from an iTunes store movie and copy paste and edit it for your purposes, which is what I did.
    Cheers everyone!

  • HT204382 I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

    I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

    Please note:
    If your Mac has OS X Lion, MPEG-2 functionality is built in and the QuickTime MPEG-2 Playback Component is unnecessary.
    QuickTime MPEG-2 Playback Component for Mac OS X - Apple Store (U.S.)

  • Does FCP X has multi cam option? and it support VOB video file ?

    Does FCP X has multi cam option? and it support VOB video file ?

    Jeaux wrote:
    Premier is a bloated Windows app first, ported to Mac. I seriously suggest you download the trial version of Premier before you drop $800. for it (or $1699. for the suite.), and see for yourself if it's all that.
    Is Adobe software overpriced? Opinions vary.
    And FCPX is a bloated inefficient Apple app not ready for prime time, but will function nicely as a hardware upgrade requirement, it's already started. Why do you think it's so cheap.
    Apple makes their money via hardware.
    pancenter-

Maybe you are looking for

  • Can not send email from corporate account when out of office

    I have a 3G+wifi ipad, my sending via corp email works when I'm in the office (connected via wifi) but doesn't send when I'm on 3G and other wifi network (my home wifi). When I send from the other locations I can send from yahoo account only. I have

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3. I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all

  • Error while logging to OIM11g

    Hello experts, after deploying in WLS a simple java class just to test the login functionality, I'm not anymore able to access to OIM logging through the user form, while I'm still able to login through SSO. When I try to login I get the following er

  • Can I Install Photshop 10 on computer with no CD Rom?

    Are you able to install Photoshop 10 progarm on computer with no CD Rom?

  • Dashboard Widgets for iWeb

    It would be great if Apple added the ability to add pre-canned coded widgets for inclusion into iWeb – This would allow us to add such things as local weather, Ski reports, stocks, webcams, news feeds etc... Just drop a widget onto the page as you wo