My computer always fails to start the first time (X99S GAMING 9 AC + Win 8.1)
Hello everybody!
I have a problem with my new desktop computer.
Every time I turn it on, Windows fails to start after the bootscreen and shows me a BSOD. After that, the computer reboots itself, tries to use Automatic Repair and tells me that maybe rebooting the computer could solve the issue, so I reboot the computer and everything works fine. I have to do this every time I turn on my computer.
Sometimes it also happens when resuming from hibernation. Why does this happen? All my drivers are up to date.
My computer is the one in the signature.
Thank you!
Quote from: Svet on 12-December-14, 17:22:20
you should enable it before OS installation
Thanks for the help Svet
I enabled before and the same problem. I use HD SSD Samsung Evo 840 w last firmware in SATA port 1.
I have a bluray drive recorder, a DVD recorder and a hard drive 1tb.
If I unplug everything and leave only the SSD, windows normally starts in quick boot. I believe it is a bug in fastboot msi / fastboot.
I tried with a 320gb HDD (normal drive, no ssd) SATA Western Digital, alone in port sata and windows starts normally, if I plug the other players and the hd 1tb, fast boot freezes at logo MSI and then present the following error: "MACHINE_CHECK_EXCEPTION" or "whea_uncorrectable_error".
To re-start, I have to remove the SATA cable, reset the PC, it will enter the UEFI BIOS, plug the HD and save and exit. By doing so the pc re-enters the windows. But if I turn off and on, he returns to lock the MSI logo. If I turn off the fastboot and MSI fast boot the pc starts normally.
Sorry for my English, I'm using Google Translator to help me, I am Brazilian.
Similar Messages
-
Trying to add pictures from my computer to my iphone for the first time how do i do that
Trying to add pictures from my computer to my iphone for the first time how do I do that?
Sync them as you would anything else.
Open itunes, connect iphone, choose what you want, sync -
Reader 9 on a Mac always says it's the first time you've opened this PDF
Since upgrading to Reader 9 Intel Macs every time I click on a PDF file to open it Reader says "You are opening the application Adobe Reader for the first time. Are you sure you want to open this application". Most annoying. Never did it with V8.
Thanks a million that fixed it. Man I had loads of permissions to fix but that must have been one as it now works fine. If I could impose on your knowledge one more time. I have been talking to Dave Taylor at Gamerzines magazine. It's a series of Gaming magazines using Reader and displaying Flash content such as Game videos etc. I'm using V9 and Flash 10 but all that happens when I click on a link on the magazine it just says buffering and nothing happens. Any ideas? I've set Multimedia Legacy to Flash and Trust has Flash as Always Allow. Plus the correct link is in the Trust Manager.
-
Edge animate animation does not start the first time I load the page. But does the second time.
Hi all,
I am having trouble with an edge animation on a web page. It doesn't load the first time the page is loaded, but loads fine the second time or any time after that. To test I am clearing my cache, then reloading the page. It seams to work in IE the first time but not Firefox or chrome.
I have a temporary copy of the page here ... http://emiwip.com/monique-mathieu/landing-page-wip.html
Can anyone tell me what is going on?
Thanks.
DanI found the answer here ... Publishing no longer works in latest Edge
It appears that you need to load the latest jQuery in the head of the pag. That fixes it.
Dan -
Grub fail to boot the first time
Hello
I spent the past 2 days trying without success to install my archlinux. I am out of ideas so I come here for advise.
Grub doesn't seem to be able to load my LVM partions.
Before you ask, yes, I have the dm_mod in the module list and the lvm2 in the hook list. Yes I regenerated the image.
Here is my /boot/grub/grub.cfg (Which is loaded! Grub load correctly the config, load the initrd and everything!, the isssue comes after the menuentries)
insmod gzip
insmod part_gpt
insmod lvm
insmod ext2
set root=(lvm/lv1-boot)
linux /vmlinuz-linux root=/dev/lv1/root ro
initrd /initramfs-linux.img
I tried to use /dev/mapper/lv1-root, it does just the same.
/etc/fstab have been generated by genfstab.
# UUID=xxxxxx
/dev/mapper/lv1-root / ext4 ro #Tried also with rw and default optiions...
# UUID=xxxxxx
/dev/mapper/lv1-boot /boot ext2 rw,error=continue,user_xattr,acl
Boot log:
[ 0.981237] Failed to access perfctr msr (MSR c0010004 is 0)
/dev/mapper/lv1-root: recovering journal
/dev/mapper/lv1-root: clean, 48390/655360 files, 385993/2621440 blocks
Loading lvm2 hook & enabling the lvm paritions
:: mountung '/dev/mapper/lv1-root' on real root
[OK] Listening on udev Control Socket
Expecting device dev-mapper-lv1\x2dboot.device...
[ TIME ] Timed out waiting for device dev-mapper-lv1\x2dboot.device.
[DEPEND] Dependency failed for /boot.
[DEPEND] Dependency failed for Local File Systems.
[ 184.408704] systemd-udevd[124]: worker [166] did not accept message -1 (Connection refused), kill
[ 185.625370] systemd-udevd[124]: worker [186] did not accept message -1 (Connection refused), kill
systemd-udev[121]: worker [xxx] terminated by signal 9 (Killed)
It propose me to enter recovery mode or to continue and if I continue, it works fine!!! But as it is a remote server, this happen way before the network initialization so I can't let it be
I must have missed something setting up grub. But what?
As I said, I am out of ideas . Does someone would have any?
Regards,
EDIT: additionnal infos:
GRUB2
GPT
/dev/sda1 -> bios
/dev/sda2 -> Linux LVM
pv /dev/sda2
vg lv1 /dev/sda2
lv:
root -> ext4 (I tried ext3... no luck)
boot -> ext2 (I tried ext3 and ext4... no luck)
swap -> swap (unused)
Install via bootstrap (https://wiki.archlinux.org/index.php/Install_from_Existing_Linux Method1)
EDIT2:
I tried with MBR instead of GPT, exact same issue
I tried to gensftab with UUIDs instead, changes nothings
Last edited by creack (2012-12-21 21:29:58)In the example on the wiki, there are no parentheses around the lvm/lv1-boot:
# (0) Arch Linux
menuentry "Arch Linux" {
insmod lvm
set root=lvm/VolumeGroup-lv_boot
# you can only set following two lines
linux /vmlinuz-linux root=/dev/mapper/VolumeGroup-root ro
initrd /initramfs-linux.img
Note: I don't know that the wiki is correct. I'm just noting the disparity. -
I just thought I'd put this out there and see if anyone else had the same anomaly. When I open Flash Cayalyst Beta 1 I get a loading screen but the program never opens. If I try again it usually opens. I am using vista 64bit. Anyone else had this problem?
I am also having this problem. I open the app, it runs the startup screen and then the screen goes away but nothing happens.
this is the log file that i got
==============
!SESSION 2009-07-10 22:51:12.000 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -clean
!ENTRY org.eclipse.equinox.p2.ui.sdk 2 0 2009-07-10 22:51:43.000
!MESSAGE Could not locate the running profile instance -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR -
Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off. All other back up attemps fail. Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function. Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity. I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired. The external HD is not S.M.A.R.T. supported.
I haven't tried replacing the cable yet. Is that the next thing I should try?What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?
-
I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?
Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath -
i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back as i did not want it to restore my old phone anyway! i also had my hone set up to the cloud and it didnt work! PLEASE SOMEONE HELP ME
Can you try to use another computer?
If this does not work, visit an Apple Store or an Authorized Apple Service Provider next to your place, and show them the phone, maybe they can restore it before you'll have to get it serviced.
Did you try to put it in recovery mode?
iOS: Unable to update or restore -
get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.
''mbratlie [[#question-1055011|said]]''
<blockquote>
It was working fine and I had no problems, and then one day I tried opening a window and it froze. When I tried quiting the program my whole window went black. The x to the close the window doesn't work. The only option I have in my tool bar is Firefox and nothing happens when I try to quit firefox. Every time I try to shut down my computer Firefox prevents it. I haven't updated Firefox yet, so it's an older program, but only by a month or two. What's going on and how do I fix it?
</blockquote>
This is the first time it's ever happened. I downloaded the new operating system for Firefox but I can't install it until the Firefox currently running on my laptop quits, which it won't. -
Converting from WORD to pdf always fails the first time
OS is XP. Acrobat Pro 8.1.5. When I first convert from WORD, EXCEL, whatever the program appears to be working but no file is created. This happens always on the first time I convert to pdf for the day. Once I do it again, it works and continues to work throughout the day. I turn off my computer at night and again the next day when I come in it doesn't convert the first time but will work again. Is there something in Windows or Acrobat that I can fix to get this to work properly?
If you are using Word 2007 (you don't say) you might try the Microsoft plugin... this is instead of Acrobat
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en
If you are using an earlier version of Word (or Word '07) make sure you have installed all Microsoft Office updates, so you'll know this is not a Microsoft bug -
I have an HP Pavilion DV9000.
I had this problem too. Not just with FF 4 but also previous versions. For that and other reasons I decided to by an SSD and install windows and all the programs on there. That worked fine except for firefox. Boot time is much faster (2o secs) and programs (from the startup folder) are loaded almost immediately after the desktop comes up. However firefox still took 90 seconds to load. After some trial and error I disables in the registry prefetcher and superprefetch (I am running windows 7, no SP1). Then I restarted my computer twice. The first time firefox did not load any faster but at any subsequent startup firefox starts in a few seconds. In fact some times it is so fast it comes up before the wireless network connection is established. HTH
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/SessionManager/MemoryManagement/PrefetchParamaters/EnablePrefetcher --> 0
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/SessionManager/MemoryManagement/PrefetchParamaters/EnableSuperFetch --> 0 -
Used my girlfriends computer to start my iPad for the first time. I logged into my itunes account. Now the iPad has her iTunes account on it. How do I change it to mine.
You can log out of her account by tapping on the id on the right-hand side of Settings > Store and you can then log in with your id - is that what you want to do ?
-
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
MacBook Pro battery ran low and computer shut down , after charging battery I tried to start up and I got an Apple on a gray screen with spinning wheel that went to a panic call out screen and that's as far as it will go. I've tried start up with com
-
My ipod has suddenly stopped me putting songs onto it, it keeps coming up with the errors (-53) Ive tries to restore it, it says it restoring but when its finished my musics still on it. Can anyone help??
-
My iPad mini screen is cracked. What do I do?
My iPad mini screen is cracked. What do I do?
-
Hi All, I have one query which is taking much time in dev envi where data size is very small and planning to implement this query in production database where database size is huge. Plz let me know how I can optimize this query. select count(*) from
-
Null Pointer Exception with iterator
Hi, I'm trying to use an iterator on a collection bound to a jsf page fragment through datacontrol (data is retrieved from a web service). Everything works fine except when this collection is null; I'm then getting a null pointer exception. Is there