My computer cannot remove Apple Application Support.msi

I cannot syncing iphone to my computer   I will remove itune and install again  But my computer cannot remove Apple Application Support.msi ( I try many time)
my computer have massage " the feature you are trying to use on a network resource that is unavaliable " help me

Reset computer and try again

Similar Messages

  • Unable to remove old version of iTunes, apple application support.msi

    Hi, I'm having trouble with my itunes and i don't know how to uninstall the old version of itune or uninstall the apple application support file that is in my control panel if anybody can help it will be greatly apprciated....

    Did you get your issue resolved?  I think I'm having the same problem.  I can't uninstall itunes and I can't reinstall itunes without a box popping up stating
    " The feature you are trying to use is on a network resource that is unavailable.  Click ok to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
    And when I search for that file on my computer, it finds 2 different paths and NEITHER of them contain the .msi file.   I'm ready to pay apple support just so I can scream at someone.  This is so frustrating!!!!

  • HT201628 When I try to access my itunes icon from my computer it get Apple Application support was not found.  Apple Application support required to run itunes.  It then say uninstall itunes, then install itunes again.  what do i do and will i lose all my

    When I try to access Itunes Icon on my dell computer I get an Apple application support was not found.  Apple application support required to run Itunes, and say uninstall itunes, then install itunes again.  It used to work.  What do I do?

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • I cannot install itunes, cannot delete apple application support

    what can i do,

    Okay so you are trying to install iTunes on your PC, but it wont install? I had a similar problem with one of my computers the other day. Try Updating windows. As soon as I updated windows it worked. So try that.

  • I accidentally removed my apple applications support program from my computer how do i get it back on?

    I had very little memory on my C drive and had to remove some programs to free some up but by accident i removed Apple applications support. How do i put it back on or do i have to remove and re-install the whole itunes program to get it to work again?

    We can get it back in without doing an uninstall/reinstall, if you like.
    Download and save a fresh copy of the iTunesSetup.exe installer to your hard drive.
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?

  • Itunes won't download. apple application support error.

    When trying to download itunes in order to use my new nano device, The error message need apple application support comes up. Have contacted maker of my laptop (Toshiba) they want me to pay for their help. I don't have a geek squad plan. there has to be a way to get the apple application support in order to enjoy my new nano. Or, I'll have to return it. any suggestions.

    Are you able to uninstall Apple Application Support?
    This Apple article will give you more information about removing the Apple related apps -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    After removing Apple Application Support, try to download and reinstall iTunes from here -> http://www.apple.com/itunes/download/

  • HT1926 when i try to install Itunes for windows I get a message that says the older version of Apple Application Support cannot be removed contact technical support group.

    I also get a message that says the Apple Mobile Device Support cannot be removed.
    then Itunes ends the installation due to errors.
    These two files show up in the control panel and when I try to delete them it says they are on a network resource that is unavailable.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Application Support entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, and Restart the PC. Try another iTunes install. Does it go through properly this time?

  • HT1925 The older Version of Apple Application Support cannot be removed. Contact your Technical Support Group

    When I try to load iTunes it keeps telling me The Older Version of Apple Application Support cannot be removed
    I havee tried to do this thro Add and remove, without any succes

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Application Support entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, and Restart the PC. Try another iTunes install. Does it go through properly this time?

  • Apple application support cannot be removed

    I have been trying to remove all components of iTunes and reinstall new versions. I can't install the new version until all old comonents are gone. I get an error stating "an older version of Apple Application Support cannot be removed".
    Help?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Application Support entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, and Restart the PC. Try another iTunes install. Does it go through properly this time?

  • IM TRYING TO INSTALL ITUNES TO MY COMPUTER BUT AN ERROR KEEPS ON POPPING SAYING THAT APPLE APPLICATION SUPPORT IS REQUIRED TO RUN ITUNES PLEASE UNINSTALL AND REINSTALL ITUNES. WHAT DO I DO?

    IM TRYING TO INSTALL ITUNES TO MY COMPUTER BUT AN ERROR KEEPS ON POPPING SAYING THAT APPLE APPLICATION SUPPORT IS REQUIRED TO RUN ITUNES. PLEASE UNINSTALL AND INSTALL ITUNES. WHAT SHOULD/CAN I DO?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally. You could try this approach first.
    tt2

  • A later version of Apple Application Support is already installed on this computer.

    I am trying to update / install iTunes 12.0.1.26.  Apple Application Support will not install because it says there is already a later version installed.  There is not!  I have uninstalled after initial message and tried to reinstall but I still recieve the same message.

    Good Afternoon, JohnHT2!
    I think I have the fix to your issue.
    I've been experiencing the same issue as you describe above. The issue occurred for me during the upgrade process from version 11.4.0.18 to version 12.0.1.26 (which is the current version downloadable from Apple).  The installation sometimes appears to be okay, but the Apple Application Support fails to update correctly.  In other instances, the iTunes installation fails completely with error 1603 (which is generic "fatal error" code).
    Symptoms:
    Just some of the symptoms I've noticed in my environment.
    - In Programs & Features, there is no Apple Application Support to uninstall.
    - In Event Viewer's Application log, you may see Event ID 10005 from Source MsiInstaller, stating the dreaded error message "A later version of Apple Application Support is already installed on this computer."
    - In Event Viewer's Application log, you may see Event ID 1000 from Source Application Error, stating "Faulting application name: MsiExec.exe" along with a bunch of other error details.
    - When attempting to start iTunes, you may receive popup error "Apple Application Support was not found.  Apple Application Support is required to run iTunes.  Please uninstall iTunes, then install iTunes again".
    - Uninstalling and installing iTunes fails, including via the steps described for a "full uninstall" as described here on the Apple site (for instance: Troubleshooting issues with iTunes for Windows updates)
    - Installing Apple Application Support via the extracted MSI (AppleApplicationSupport.msi) fails with the same error: "A later version of Apple Application Support is already installed on this computer."
    - Installing previous versions of Apple Application Support fails with the same error (tried versions 10.7.0.21, 11.0.0.163, 11.0.1.012, 11.0.3.42, 11.1.0.126, 11.1.3.8, 11.2.2.3, 11.3.0.54, 11.3.1.2, 11.4.0.18).  (now that I know the issue, I'm confident any previous version of the installer will fail).
    - If you run the MSI installation with verbose logging, you may see lines stating: "PROPERTY CHANGE: Adding BNEWERPRODUCTISINSTALLED property. Its value is '1'." and "PreventDowngrade. Return value 1."
    There may be other indications, but these are things we ran into.  I'm trying to be detailed so that other folks who run into this issue may feel better about the below fixes being an option for them.
    Resolutions:
    I've found two ways to remedy the issue in our environment.  You can either use the Microsoft FixIt utility to clean up the previous installation for us, or you can edit the registry manually to repair the installation.  We're in an office and prefer not going computer-to-computer to fix everyone's issue independently, so we had to go via the registry.  I was able to fix it via both ways, though.
    Fix 1: Run the Microsoft Program Install Uninstall Troubleshooter.
    For this fix you will need to be logged in as an administrator for the computer.
    Here are the steps:
    Download and Run the Microsoft Program Install and Uninstall FixIt: [FixIt Link]
    In the troubleshooter, choose: Detect problems and apply the fixes for me (Recommended)
    Choose Installing
    From the list, select Apple Application Support and click Next. (it actually does appear here!)
    Select Yes, try uninstall. This step could take a while to process once it starts.
    Once it confirms it is fixed, click Next.
    Select "Yes, the problem has been fixed" and click Next.
    Finish/close the FixIt tool.
    Now the Apple Application Support will install successfully on your next attempt.
    - If you don't have iTunes installed, you can simply run the latest downloaded installer: iTunes64Setup.exe
    - If the other iTunes components are already installed, you will need to go to Programs & Features (or Add/Remove programs) and uninstall the iTunes program, then re-install the program from the downloaded installer: iTunes64Setup.exe
    - If you have the MSI, you can simple run AppleApplicationSupport.msi and carry on happily.  Make sure it's the right version of the MSI (right-click it, select Properties, go to the Details tab and verify the Comment line says "Apple Application Support 3.1").  If you don't know what an MSI is... ignore this and use the installer.
    iTunes should work perfectly normally for you now.
    Fix 2:
    If you're like me and you need to repair iTunes over a larger number of computers, then Fix 1 quickly becomes too time consuming.  Thankfully, a quick registry edit will resolve the issue as well.
    For more advanced users; if you're not sure what the Windows Registry is, please tread very carefully and make sure you back up the registry before you change anything!
    You'll need to be an administrator on the computer to do this.
    Start Registry Editor.
    In Windows 8.1, you can right-click the start menu (flag in the bottom-right corner) and choose Run.  Then type "regedit" and click OK.
    In Windows 8, go to the Start menu, click the magnifying glass (or just start typing) and search for "regedit".  The first result should be "regedit.exe" - click that.
    In Windows Vista, click the Start menu, then click the little arrowing pointing to the right (>) and choose Run.  Then type "regedit" and click OK.
    In Windows 7 or XP, click the Start menu orb, and choose "Run...". Then type "regedit" and click OK.
    Make a backup of your registry.In Registry Editor, right-click on "Computer" and choose "Export".  Save the file somewhere on your computer.  You'll probably never need it.. which are famous last words.  Better safe than sorry!
    Navigate to HKEY_CLASSES_ROOT\Installer\Products\ED0FAC38B3D873C46A13B2F861CE0313\
    If the key "ED0FAC38B3D873C46A13B2F861CE0313" doesn't exist, then go to HKEY_CLASSES_ROOT\Installer\Products and make sure "Products" is highlighted.
    Go to the Edit menu and choose "Find...".
    Do a search for "Apple Application Support".
    Your first result should be a ProductName value of "Apple Application Support".
    Verify at the very bottom of Registry Editor that your current location is "HKEY_CLASSES_ROOT\Installer\Products\[GUID], where GUID is an alphanumeric string that's 32 characters long.
    Right-click "Version" and choose "Modify".
    In Value Data, type 0 (the number zero) and click OK.
    Close Registry Editor.
    You should now be able to successfully install the AppleApplicationSupport.msi or re-install iTunes.  If, for whatever reason, it still detects the wrong version, go back to the Registry Editor and delete the entire key from above (so, right-click on the 'folder' named "ED0FAC38B3D873C46A13B2F861CE0313" and select "Delete").  Should never be necessary, though..
    In a Windows domain there are many ways to update the registry so use whatever works best for you.  I'll be adding this as a special extra step in our SCCM deployment.
    I hope this helps!  It took us a good many hours to track down what was stopping us from resolving the issue (and/or causing it to begin with).  Suffice to say we now have a whole bunch of users who are very happy to no longer get iTunes error messages when they log into their computers or attempt to start iTunes itself.
    Have a great day!

  • Cant install Itunes on my work computer, get error message Apple Application support not found, so i uninstall and reinstall again and its the same message

    cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
    tt2

  • TS5376 HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
    tt2

  • Itunes 10.1 will not download because I can't get old apple application support off my computer windows xp

    itunes 10.1 will not download because I can't get old apple application support off my windows XP. Help!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

Maybe you are looking for

  • I'm relatively new with my iPad...how do you upload your information from one iPad to another on the computer?

    I've been using a borrowed iPad from work.  Now I have my own and I need to upload the apps and photos from the borrowed iPad to my iPad!  I've connected the iPad to my PC but haven't been able to bring up my apps and photos to upload to my computer.

  • How to redirect to a page dynamically after authentication Apex

    We have developed an application and the application id is 333. we have developed a login screen(page No. 111). After login Company page (Page No.1) will appear where the user selects the company name. Once company is selected, the control goes to Me

  • SDHC card issues

    Hi  I recelntly re-installed Arch on my Dell 1525 laptop. Earlier the built in SD card reader worked. Im not sure if I explictly need to install a driver for this.  output of uname -a 2.6.36-ARCH output of lspci 02:09.0 FireWire (IEEE 1394): Ricoh Co

  • WPF DataGridComboboxColumn selction fails if Drag&Drop is used

    I've got a Usercontrol with TabControl including Datagrid for each tabItem. The Datagrid has 3 Columns, one as a combobox column. Now I've implemented some Drag&Drop function for moving rows using PreviewMouseLeftButtonDown and Drop event. With that

  • Software update causes iPhone to not connect with iTunes

    I did a software update this morning. The three updates were: "iDVD Update", 'Digital Camera Raw Compatibility Update", and "Safari". After that my two iPhones (one is my wife's) can not connect to iTunes, nor iPhoto. I switched cables and the connec