My computer doesn't recognize my iPod when hooked up through a USB port?

I restarted my computer and my iPod, and it doesn't work. The iPod does not recognize being hooked up to a computer, and the computer does not recognize that the iPod is hooked up to it. My iPod's not even charging when connected to my computer. This first occured when I disconnected my iPod from my XBox 360 while the 'Do Not Disconnect' screen was shown. However, the iPod still works with my XBox 360 as well as my AC adapter charger. The iPod also does not show in Device Manager, so it's not recognized by Windows or iTunes. Any help is greatly appreciated, thanks in advance.
Windows XP   Windows XP   Compaq Presario Intel Pentium 4

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Yu need iTunes 10.5 or later

Similar Messages

  • My computer doesn't recognize my ipod when I plug it in.

    My computer doesn't recognize my ipod when I plug it in.  This happened after my daughter connected her ipod to my pc.

    Try here:
    iOS: Not responding or does not turn on
    Next make an appointment at the Genius Bar of an Apple store.

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Why is my computer doesn't recognize my Ipod Touch?

    My computer doesn't recognize my Ipod Touch. Any suggestion?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My computer doesn't recognize my ipod, why?

    My computer doesn't recognize my ipod, why?Can u help?T.you (i'm french)

    http://support.apple.com/kb/ts1369

  • My computer doesn't recognize my ipod

    My computer doesn't recognize my ipod. It is not visible in iTunes or in the computer icon

    Click here --> iOS: Device not recognized in iTunes for Windows

  • I can not get my iPod touch to play through my USB port

    I can not get my iPod touch to play through my USB port on my motorcycle stereo amp but a regular iPod works any suggestions on what's wrong or does any one know what Stereo amp for motorcycle will work

    Contact the manufacturer of the motocycle system.  Many systems are not compatible with iOS devices but work fine for the simple iPods.

  • My computer doesn't recognize my iPod and therefore will not sync my new music

    When I plug my iPod up to my computer, my computer doesn't recognize that the iPod is plugged in. I've tried reinstalling iTunes and this iPod has synced with this computer before.

    Hy there,
    In order for you to solve this problem you have to follow these stept if your running windows:
    1'st step is to go into the device manager
    2 step is to go to portable devices (it is right under network adapters)
    3 step is to right clic apple ipod and click update drivers
    4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    After that your itunes will pump up alown and youl see your iphone right there.
    If these doesent work try restarting your device and then see what happens.
    Good luck and sry for my bad righting.
    Andrei

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

  • Computer doesn't recognize that ipod is plugged in

    So I've had this ipod for at least a year now and have been using the same computer for the past 7 months and it's always worked fine. Now all of the sudden my computer doesn't recognize that it is plugged in. It's not even that it doesn't recognize the USB device it's not there period. I tried manually putting it into disk mode but it still didn't recognize it. Please help!!

    http://discussions.apple.com/message.jspa?messageID=11359368#11359368

  • My computer doesn't recognize my ipod. Help.

    I have an ipod 3 and an HP Windows Vista computer. 5 months ago my USB cable was starting to break and sometimes not work, so I desided to buy a new one. I went to Mexico for a family visit (where I'm from) and desided to buy one there while I was at it. But the brand was not apple. When I came back home I used the new USB cable and it worked fine, better than fine, actually, for two months at least, two weeks ago whenever I connected my ipod to the computer many different things started to happened each time:
    My computer would send me a message saying "USB Device Not Regognized. 'One of the USB devices conected to this computer has malfunctioned and windows does not recognize it'" (The most common. Happens 5 of every 6 times I conect my ipod) Also I have my ipod set to download all the images from the ipod to computer whenever I saved images in my ipod with "windows Photo Gallery" and even if my computer recognizes the ipod, windows gallery recognizes it too but it doesn't dowload the images because it says there's an error.
    For some miracle the computer recognized the ipod but when itunes opens it freezes
    If Itunes works for some other miracle itunes tells me the ipod could not be recognized because there was an error from the iphone (when it's not even a iphone)
    So I'd really need your help. Is it my computer, my ipod or itunes? Or just what's going on? 'Cause it had all been working fine for me before and this issue started out of nowhere. PLEASE and thank you.

    Could be the iPod, the computer or the cable.  Can you borrow a know good cable?  Also see:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • My computer doesn't recognize my ipod shuffle anymore

    I have downloaded music before (a while ago actually) on my ipod shuffle (2nd generation). A couple of days ago I bought some music on itunes and when i connected my ipod to my computer it said that it doesn't recognize the usb port.  Can somebody help me ?
    Thanks and merry x-mas
    France007

    Hello France007,
    It sounds like your iPod Shuffle is not being recognized in iTunes in Windows. I found this article for you to help troubleshoot the issue named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Here is a general overview of what the troubleshooting will entail:
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    2. If your iPod displays an exclamation point folder or sad iPod icon
    3. Charge the iPod and make sure it is getting power
    4. Secure the iPod's connections
    5. Disconnect other USB Devices
    6. Determine whether your iPod's cable functions properly
    7. Place the iPod into Disk Mode
    8. Determine which format the iPod is in
    9. Verify that USB drivers are installed
    10. Determine if Windows confuses iPod with a network drive
    11. Determine if third-party software may be causing conflicts
    12. Reinstall iTunes
    13. Make sure FireWire card is a WHQL-certified IEEE 1394 card
    14. Check for a conflict in the FireWire chain
    15. Determine if there may be an issue with your computer
    16. Your iPod needs service
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • My New computer doesn't recognize my ipod nano

    my old computer crashed. i now have a new laptop. i have installed my iPod software and the latest iTunes. i can go into iTunes, access the music store, and everything else... but when i plug up my iPod, it doesnt pop up in the source menu in iTunes. the iPod is showing DO NOT DISCONNECT so i know that the cable and USB port are good. i registered it on this new computer and everything but i dont know why it wont recognize that its plugged up and let me put more songs on it. ive searched these threads and cant find a straight up answer that doesnt involve erasing my whole iPod. is that my only option? ive spent $100+ on iTunes from my old computer and granted i know i cant put these songs onto my new laptop, i at least want them to stay on my iPod! can anyone please help?
    IBM ThinkPad   Windows 2000  

    thanks for replying! im assuming you mean these...
    1. Reset your iPod, iPod nano, iPod mini, or iPod shuffle.
    2. Retry your iPod with a different USB or FireWire port on your computer (please note that the latest iPods can only be synced through USB).
    3. Restart your computer, and make sure that you have the latest software updates installed.
    4. Reinstall your iPod and iTunes software. You can download the latest versions of iPod Updater and iTunes from our website.
    5. Restore your iPod using the latest iPod Updater. Important: Please note that restoring an iPod will erase all songs and files on your iPod and restore it back to its original settings. Make a backup of any files on your iPod before restoring it. After restoring, you can transfer your music and files from your computer back to your iPod again.
    I did reset my iPod, tried restarting the computer, and reinstalled iPod on here AND updated iTunes to the latest version. I only have one USB port on this laptop, so its possible it isn't high-powered (is that the right term?) enough for iPod? This computer is pretty old. So aside from that the last option in your suggestion is the Restore. I just don't understand how that can be the only option just because I got a new computer. If so I wish I had known that before using iTunes to buy my music

  • My computer doesn't recognize my Ipod and it is disabled

    After not using my ipod touch fro a while, I forgot the password. I used up all the tries, and now it says that it is diabled and i have to connect it to my itunes. When I plug it into my Windows 8 computer, itunes doesn't recgonize my ipod. It is on file for back up, but nothing happens. My itunes is up to date. I don't know what to do. I've tried so many different things.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Computer doesn't recognize my iPod anymore - Folder icon stuck on screen

    Help! The folder icon is stuck on my iPod....and now my iPod won't connect to the computer so I can try all the resets/restarts/re-whatevers. I have tried several different iPod USB cables. I have updated the iTunes, I have reinstalled software, I've downloaded the Updater-but still won't connect. Can anyone provide me a little help or direction?
    mac mini   Mac OS 9.0.x  
    mac mini   Mac OS 9.0.x  

    Suggestions when you run into a problem of a Sad iPod icon or a folder icon with exclamation point with your iPod.
    1. Try these five steps (known as the five Rs) will conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check each one starting from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Try to connect on a different computer i.e. a PC formatted iPod connect with a Mac computer or Mac formatted iPod with a Window base PC.
    8. Try to do a Erase (Disk Utility) on a Mac computer or a reformat with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer).
    If one of the above step helps to get your iPod to be recognized with your computer, do a Restore.
    I suggest that you should try to do a Restore with a PC computer, and do a few attempts.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.

Maybe you are looking for

  • Reverse path direction in Illustrator CS5

    I have started to use Illustrator CS5 for outline drawing this year. I purchased the license time ago, but I always preferred to use FreeHand for outline drawing (I design lettering and typefaces). Now that FreeHand is unfortunately become a bit too

  • Acrobat pro 10.1.9 stopped being able to OCR scans

    Acrobat pro 10.1.9 stopped being able to OCR scans. I am running Windows 7 (64-bit) and I have OCRd several hundred pages of test over the last 5 months, but receintly I get a "Some of the pages couldn't be OCRed"  and "Acrobat could not perform reco

  • I have $84 store balance but need to change registered country (I moved - foreign credit card)...

    Can I spend that and won't have a problem later when I change my country, with apps and everything? I read your 'purchased'  won't show your stuff anymore, but you can still search individually and re-download free, sounds like some chaos comes with

  • BI-BO NEED INFORMATION

    Hi Experts, I   am  learning  Bi-Bo, i need basic information of DataWarehouse.   how much, i need to concentrate on Datawarehouse concepts?. Please proviude me bi -bo basic information. thank you. ramesh T <Moderator Message: A good start is [the he

  • How to locate files

    Hello, I am new to Aperture, I am trying to keep all my pictures on an external drive connected to my iMac, in addition work on them via share with my MacBook. My question is how do I verify within Aperture of the location of an entire Project or a i