My computer doesn't recognize my ipod when I plug it in.

My computer doesn't recognize my ipod when I plug it in.  This happened after my daughter connected her ipod to my pc.

Try here:
iOS: Not responding or does not turn on
Next make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • My computer doesn't recognize my iPod when hooked up through a USB port?

    I restarted my computer and my iPod, and it doesn't work. The iPod does not recognize being hooked up to a computer, and the computer does not recognize that the iPod is hooked up to it. My iPod's not even charging when connected to my computer. This first occured when I disconnected my iPod from my XBox 360 while the 'Do Not Disconnect' screen was shown. However, the iPod still works with my XBox 360 as well as my AC adapter charger. The iPod also does not show in Device Manager, so it's not recognized by Windows or iTunes. Any help is greatly appreciated, thanks in advance.
    Windows XP   Windows XP   Compaq Presario Intel Pentium 4

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Yu need iTunes 10.5 or later

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Why is my computer doesn't recognize my Ipod Touch?

    My computer doesn't recognize my Ipod Touch. Any suggestion?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My computer doesn't recognize my ipod, why?

    My computer doesn't recognize my ipod, why?Can u help?T.you (i'm french)

    http://support.apple.com/kb/ts1369

  • My computer doesn't recognize my ipod

    My computer doesn't recognize my ipod. It is not visible in iTunes or in the computer icon

    Click here --> iOS: Device not recognized in iTunes for Windows

  • My computer won't acknolwedge my ipod when its plugged in and then some!!!!

    My computer won't acknolwedge my ipod when its plugged in and then it shows me a folder with an exclamation point on it when i try to turn it on or try to plug it into the computer it just stays at the little folder with the exclamation point. I have tried everything the FAQ and all!
    Can some one PLEASE HELP ME!
      Windows XP  

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    When restoring the iPod, put it into disk mode first.
    Putting iPod into disk mode.

  • I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

    I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

    If your using the same cable for your wall charger as you are for your computer, than the problem is probably within the cable (if there isn't visible damage to the cable of coarse). The quockest solution would be to buy your self a new cable. There is probably nothing wrong with your wall adapter, so just the cable will do.

  • Why can't my computer see or find my ipod when i plug it in?

    why can't my computer see or find my ipod when i plug it in?
    so frustrating...

    See Here...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes

  • My computer doesn't recognize my iPod and therefore will not sync my new music

    When I plug my iPod up to my computer, my computer doesn't recognize that the iPod is plugged in. I've tried reinstalling iTunes and this iPod has synced with this computer before.

    Hy there,
    In order for you to solve this problem you have to follow these stept if your running windows:
    1'st step is to go into the device manager
    2 step is to go to portable devices (it is right under network adapters)
    3 step is to right clic apple ipod and click update drivers
    4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    After that your itunes will pump up alown and youl see your iphone right there.
    If these doesent work try restarting your device and then see what happens.
    Good luck and sry for my bad righting.
    Andrei

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

  • Computer doesn't recognize that ipod is plugged in

    So I've had this ipod for at least a year now and have been using the same computer for the past 7 months and it's always worked fine. Now all of the sudden my computer doesn't recognize that it is plugged in. It's not even that it doesn't recognize the USB device it's not there period. I tried manually putting it into disk mode but it still didn't recognize it. Please help!!

    http://discussions.apple.com/message.jspa?messageID=11359368#11359368

  • My computer doesn't recognize my ipod. Help.

    I have an ipod 3 and an HP Windows Vista computer. 5 months ago my USB cable was starting to break and sometimes not work, so I desided to buy a new one. I went to Mexico for a family visit (where I'm from) and desided to buy one there while I was at it. But the brand was not apple. When I came back home I used the new USB cable and it worked fine, better than fine, actually, for two months at least, two weeks ago whenever I connected my ipod to the computer many different things started to happened each time:
    My computer would send me a message saying "USB Device Not Regognized. 'One of the USB devices conected to this computer has malfunctioned and windows does not recognize it'" (The most common. Happens 5 of every 6 times I conect my ipod) Also I have my ipod set to download all the images from the ipod to computer whenever I saved images in my ipod with "windows Photo Gallery" and even if my computer recognizes the ipod, windows gallery recognizes it too but it doesn't dowload the images because it says there's an error.
    For some miracle the computer recognized the ipod but when itunes opens it freezes
    If Itunes works for some other miracle itunes tells me the ipod could not be recognized because there was an error from the iphone (when it's not even a iphone)
    So I'd really need your help. Is it my computer, my ipod or itunes? Or just what's going on? 'Cause it had all been working fine for me before and this issue started out of nowhere. PLEASE and thank you.

    Could be the iPod, the computer or the cable.  Can you borrow a know good cable?  Also see:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • My computer doesn't recognize my ipod shuffle anymore

    I have downloaded music before (a while ago actually) on my ipod shuffle (2nd generation). A couple of days ago I bought some music on itunes and when i connected my ipod to my computer it said that it doesn't recognize the usb port.  Can somebody help me ?
    Thanks and merry x-mas
    France007

    Hello France007,
    It sounds like your iPod Shuffle is not being recognized in iTunes in Windows. I found this article for you to help troubleshoot the issue named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Here is a general overview of what the troubleshooting will entail:
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    2. If your iPod displays an exclamation point folder or sad iPod icon
    3. Charge the iPod and make sure it is getting power
    4. Secure the iPod's connections
    5. Disconnect other USB Devices
    6. Determine whether your iPod's cable functions properly
    7. Place the iPod into Disk Mode
    8. Determine which format the iPod is in
    9. Verify that USB drivers are installed
    10. Determine if Windows confuses iPod with a network drive
    11. Determine if third-party software may be causing conflicts
    12. Reinstall iTunes
    13. Make sure FireWire card is a WHQL-certified IEEE 1394 card
    14. Check for a conflict in the FireWire chain
    15. Determine if there may be an issue with your computer
    16. Your iPod needs service
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • My New computer doesn't recognize my ipod nano

    my old computer crashed. i now have a new laptop. i have installed my iPod software and the latest iTunes. i can go into iTunes, access the music store, and everything else... but when i plug up my iPod, it doesnt pop up in the source menu in iTunes. the iPod is showing DO NOT DISCONNECT so i know that the cable and USB port are good. i registered it on this new computer and everything but i dont know why it wont recognize that its plugged up and let me put more songs on it. ive searched these threads and cant find a straight up answer that doesnt involve erasing my whole iPod. is that my only option? ive spent $100+ on iTunes from my old computer and granted i know i cant put these songs onto my new laptop, i at least want them to stay on my iPod! can anyone please help?
    IBM ThinkPad   Windows 2000  

    thanks for replying! im assuming you mean these...
    1. Reset your iPod, iPod nano, iPod mini, or iPod shuffle.
    2. Retry your iPod with a different USB or FireWire port on your computer (please note that the latest iPods can only be synced through USB).
    3. Restart your computer, and make sure that you have the latest software updates installed.
    4. Reinstall your iPod and iTunes software. You can download the latest versions of iPod Updater and iTunes from our website.
    5. Restore your iPod using the latest iPod Updater. Important: Please note that restoring an iPod will erase all songs and files on your iPod and restore it back to its original settings. Make a backup of any files on your iPod before restoring it. After restoring, you can transfer your music and files from your computer back to your iPod again.
    I did reset my iPod, tried restarting the computer, and reinstalled iPod on here AND updated iTunes to the latest version. I only have one USB port on this laptop, so its possible it isn't high-powered (is that the right term?) enough for iPod? This computer is pretty old. So aside from that the last option in your suggestion is the Restore. I just don't understand how that can be the only option just because I got a new computer. If so I wish I had known that before using iTunes to buy my music

Maybe you are looking for

  • How to pass multiple values to a single parameter in BW report URL

    Hi Experts, I am new to EP and learning .... i am stuck at one point where we need to pass multiple parameters to a BW report URL, this is the URL that we launch from BSP.... Suppose i have to pass different multiple values to a single parameter, how

  • What's New and Changed in Premiere Pro CS5.5 - Free Course!

    Hi All, I just wanted to point out some new video training, totally free of charge, called, "What's New and Changed in Premiere Pro CS5.5." Todd Kopriva flew all the way to Austria's "Video2Brain" studios to record these detailed tutorials and I thin

  • Extension of excel file in email attachment is .excel instead of .xls

    I have concurrent program and I'm trying to use the 'delivery option' to send the output as attachment in email. I defined a rtf template and can open the output from 'Output' button correctly. it can also send mail with attach, but the file name of

  • 'NO download for song previews' policy in iOS application?

    Let's say I need to create an application where the user needs to play a song (among other things). I will offer him the possibility to play one of the songs from his device or a song from iTunes. I will let user to chose between the free 30 sec. son

  • Retreiving only particular keys from a properties file

    hello friends, can someone kindly tell me , is there any way to retreive only particular keys from a properties file . for e.g the file is as follows abc.properties ad_1 = "hello" ad_1_fg = "bye" ad_1_hj = "dfd" ad_1_jk = "sdfsdf" bk_2_jk = "sdfdsf"