My computer doesn't want to charge when on?

My Macbook pro is a 2010 and I've been having an issue where my charger will charge the computer when off but longer charge it when it's in use. If you know anything that might help me fix this promblem I really need it because I need my computer to charge when its on I use it to much thru out the day to have let it sit and charge turned off for a few hours.

Have you tried here:
iOS: Not responding or does not turn on
You can check your warranty coverage by entering the SN here:
Apple - Support - Check Your Service and Support Coverage
For how to get warranty work see:
Apple - Support - iPod - Service FAQ
The fastest is to make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • My iphone4 doesn't want to charge when is ON but it does charge when is OFF

    ok I have no idea why or how is this happening so let me explain it.. I connected my iPhone 4 to my computer with windows 7 and it says that something is wrong with the device and iTunes did not shows any connection at all.. so I had to low the battery and when I connected to the charger it didn't charge (I tried with different cables different chargers) but the same problem.. then it run out of battery and I realized that with the iPhone off it does charge! if I turn on the iPhone connected to the charger it wont charge after the iOS start.. just turn off the iPhone and it does charge.. I don't know how or why is this happening but is crazy.. please need help with this problem..

    Hello andraawoss,
    The following article provides some useful troubleshooting steps that you may find helpful.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Allen

  • Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

    Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

    Hi thenicegirl07,
    It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
    iPod displays a sad iPod icon
    http://support.apple.com/kb/ts1373
    Resolution
    In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
    If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
    Go to http://www.apple.com/retail/storelist/.
    Choose an Apple Store location.
    Click the Reserve link under Genius Bar.
    Choose iPod.
    Select your desired reservation date and time.
    For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
    Additional Information
    iPod displays a folder icon with an exclamation point
    -Jason

  • MacBook Pro doesn't want to boot when cd rom is connected

    Hello,
    I have an issue with my MacBook Pro (2009) model.
    When I'm connecting CD-ROM (internal one) computer doesn't want to boot nither from DC ROM nor from HDD.
    As soon as I am dissconecting CD ROM system is booting up without any problem.
    Please advise.
    Thanks,
    Dubbster

    Hi Dubbster,
    Welcome to the Apple Support Communities!
    I understand that your MacBook Pro is not booting when you have the Mac OS X Install DVD inserted. Do you get any boot options when you hold down the Option key during startup? Please reference the following article and let me know if you need further assistance.
    Startup Manager: How to select a startup volume
    http://support.apple.com/kb/ht1310
    I hope this helps,   
    -Joe

  • My Iphone doesn't want to charge, please help?

    I have 3g Iphone, and I had a bit battery problem last few days, but now it just doesn't want to charge. Can you please help me, to repair it?

    Reboot your computer and the iPhone for starters.
    If you're on a Windows PC, connect the iPhone and open your Device Manager. To do that, click your Start Menu and do a search for Device Manager. Or if you're on Windows 8, open the Charms Menu on the right side and do the search from there. Once in the Device Manager, go down to Portable Devices and click the small arrow to open the sub-menu. One should say Apple iPhone. Right click on that and try to Update Driver Software. If that doesn't work, you can uninstall the driver, unplug the phone, then plug it back in to get it to reinstall the driver. That might take care of it.
    Are you able to get a hold of a different Lightning cable just to be sure it's not your cable? I've seen instances where these cables get bent or twisted, especially at the Lightning connector end, and the wire inside the sheathing breaks even though the outside looks fine.

  • When I attach USB flashdrive to my new Mac Air no icon appears.  I just finished downloading pictures off of old mac and that one worked as expected.The new computer doesn't show anything but when I pull USB out pompts message improper eject. Any ideas?

    When I attached my USB flashdrive to my new Mac Air no icon appears and the same when I attached my new superdrive.  I just finished downloading pictures off of my old Mac and that one worked as expected. The new computer doesn't show anything but when I pull the USB flashdrive out, a message prompts me with an improper eject notice. Any ideas on why no icon (a disc) appears and how can I get it to?

    Open Finder preferences, click on the General icon in the toolbar. Check the boxes for what you want displayed on the Desktop. Click on the Sidebar icon in the toolbar and do the same for what you want displayed in the sidebar.

  • My computer doesn't recognize my ipod when I plug it in.

    My computer doesn't recognize my ipod when I plug it in.  This happened after my daughter connected her ipod to my pc.

    Try here:
    iOS: Not responding or does not turn on
    Next make an appointment at the Genius Bar of an Apple store.

  • My computer doesn't recognize my iPod when hooked up through a USB port?

    I restarted my computer and my iPod, and it doesn't work. The iPod does not recognize being hooked up to a computer, and the computer does not recognize that the iPod is hooked up to it. My iPod's not even charging when connected to my computer. This first occured when I disconnected my iPod from my XBox 360 while the 'Do Not Disconnect' screen was shown. However, the iPod still works with my XBox 360 as well as my AC adapter charger. The iPod also does not show in Device Manager, so it's not recognized by Windows or iTunes. Any help is greatly appreciated, thanks in advance.
    Windows XP   Windows XP   Compaq Presario Intel Pentium 4

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Yu need iTunes 10.5 or later

  • Help my iPhone 4 doesn't want to charge unless it's off

    I have iPhone 4 only charges if it's off, when I have it on and I put it to charge when it's on and it doesn't charge what do I do

    Hello there, Laurawashere.
    The following Knowledge Base article offers up some great, in-depth steps for troubleshooting charging issues with your iOS device:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hey my windows 7 computer doesn't recognize my ipod? and my  ipod is stuck in the connect to itunes screen and is low battery but doesn't want to charge? help

    Plese help?
    First my ipod didnt show it was charging but still turned on(it was dead) so i tried the hold sleep and wake button but my computer(windows 7) wont recognize it so its stuck on the connect to itunes screen.
    PS i took it to get it fixed and they said they changed the battery not sure if that had anything to do with it????
    please help and Thank You.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • When battery is low, doesn't want to charge?

    So, sometimes, and it seems to happen more when the battery is already below 20 or 10%, I put it on the charger over night, and the next morning it's displaying the battery on the screen still at red - (I guess when things are going well during a recharge, the screen shuts off)
    At first I thought it was a cheap retractable synch cord I was using, but this has happened twice now with the official white cradle as well - and I took extra care to make sure it was properly seated before I went to sleep.
    Luckily, putting it on a Altec-Lansing pair of speakers lets it charge most of the way in a hurry... but what's going on with just putting a low battery phone on the cradle??

    Is your cradle plugged in to AC power or a USB port? If the charge is very low on the phone, it needs to be plugged in to an AC power source to charge.

  • My iPhone doesn't want to activate when start it on again

    When I restarted my iPhone it dosen't want to activate the iPhone. It says that i could use iTunes but it dosen't work either. What can I do to make it work again?

    If it says to connect to itunes on your computer be sure you have iTunes 11.1 or later on your computer.

  • My iPad doesn't seem to charge when plugged in to my MacBook Pro if the MBP goes to sleep. My iPhone continues to charge even if the MBP is closed. Is that normal?

    My iPad (3rd Gen) seems to stop charging if it is plugged into my MBP if either the iPad is closed or if the MBP goes to sleep. My iPhone charges whether the MBP is awake or asleep or even if the MBP is closed. There is a screen display that shows the iPhone is charging. The iPad only has the tiny icon at the top of the screen that show it is charging. However, the battery's % charged does not increase if the lid is closed when I am charging the iPad if the lid is closed on the iPad or if the iPad off after pressing the on off button. Is this normal?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
     Cheers, Tom

  • My iPhone4 doesn't want to charge or turn on

    Last week my phone suddenly turned off when I took it off the charger. I had to shake it so it can turn, sometimes it doesn't even turn on. It doesn't charge fully, it usually stops at 40% and it usually only stays on when it's plugged in a charger.

    These are features of faulty battery. Make Genius reservation and take to Apple Store for free quick battery diagnostic testing.

  • My computer doesn't "see" my iPhone when plugged in

    First, I have an iPhone 4. I have this new computer and I'm having to re-install all my software. When I click "Add files to library", I don't see my plugged-in iPhone in the list of drives, though I hear Windows 7 *bong* when I plug it in. I don't think this has happened before. Is there some setting I need to adjust or something? I can't transfer anything off my iphone if my computer won't even recognize it. I installed Flash and Java, but neither seem to have anything to do with this problem. Incidentally, I plugged in my external hard drive, and it got recognized fine. I also don't see the iPhone in Windows Explorer as an extra drive or anything.
    I uninstalled iTunes and reinstalled it. I got this error:The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
    I've been researching this issue for two days online. I've uninstalled/installed iTunes four times, and also installed the Gears software that I read was supposed to add drivers or whatever to fix this. That was a bust. I also can't get my computer to recognize my iPhone anymore - it doesn't show up in Windows Explorer or iTunes as a device that's been plugged in.
    I also went into the registry to add a file suggested at the following link, and rebooted - with zero success.
    http://blog.callageek.com.au/2012/03...-when-opening/
    All this is after I had to have a new hard drive reimaged. Before, I transferred between my iPhone and laptop fine. I've been at this for days now and I'm wasting tons of valuable time looking for a solution. To be honest, if I had known Apple's products were so hard to make function, I would have gone with an Android or Galaxy.

    My girlfriend had this same issue.  It ended up being her cable. 
    It was very weird and confussing as the first cable would allow the phone to show up on my laptop but not my girlfriends.  So we thought the cable was fine. 
    Further the first cable would allow the iPhone to sync with itunes on her laptop but not show up in her "My Computer." 
    By chance we tried a different cable and it worked fine on her laptop and instantly showed up in her "My Computer."
    All very weird but try a couple different cables and see if that fixes the problem first before resorting to other time consuming steps. 

Maybe you are looking for

  • Is there any order for objects in a relationship collection

    I am using two cmp ejbs A and B which are in a many to one relationship. This is like : Any Order has 0 to * OrderLines. For this my ejb A has a cmr fild of type Collection: public abstract Collection getBs(); public abstract void setBs(Collection x)

  • Calling Flex function from loaded SWF

    Hello, I need to load an external SWF file, wity ability to call functions from the base FLEX code script . Is that possible ? noting that the loaded SWF can be either in AS2 or AS3 Thanks in advance ..

  • Autogenerate Group By, only on demand?

    Hi, I find SQL Developer's "Autogenerate Group By" function very useful. But it can be quite annoying as well, especially when I'm editing an existing query. It would be great if I could create my own code up to a point, and then invoke the "autogene

  • Architectural differences between Ep5.0 and Ep6.0

    Hi Expert, Is there any document that specifies the differences in the EP5.0 and EP6.0 architecture. It seems that the only difference is just the switch framework containing the extension set and Industry Solution extension...it looks very strange!

  • Problem getting db Connetions

    Hello - I'm running 8.1.7.4 on Solaris. I had developers complaining this morning that they could not establish any connections to the db using WebLogic. They said that it was hanging trying to connect to the Oracle port. I'm trying to troubleshoot w