My computer doesnt reconize my iPod - please help!!

My iPod was working normally until it suddenly shut down and rebooted (as if I had done a soft reset with the Menu and Center button), then an icon of the charger and the words "Plug in to Restore" came up.
I now have it plugged into my computer but iTunes doesnt even know its there, my computer does reconize that a device is plugged in but asks me to "format the device"
I am currently updating my iTunes to see if that makes a difference, but I'm really stressed out about this!! What do I do?!

I assume you have tried everything here?
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock

Similar Messages

  • Computer restarts when connecting ipod - please help!

    Hey, I've recently bought a usb 2.0 card so i can connect my ipod via usb 2.0 as it will be faster than usb 1.1.
    There is a slight problem however, almost every time i connect my ipod via the usb cable to this new usb 2.0 port, the computer restarts.
    On the odd few occasions the computer hasn't restarted, my ipod has not been recognised in itunes or my computer.
    I have tried connecting other things such as my phone and my old mp3 player to the new usb card and they work fine.
    Is this a problem with my ipod or just the usb card?
    Any help would be much appreciated!
    Thanks alot.
      Windows XP  
      Windows XP  

    I've had this problem and given the advice to others and it has worked for some. This isn't mentioned in any other advice that I can see but it is a simple check that you should do, not very technical either!
    With your iPod plugged in to the computer, first go through the 5R's and other help topics to check the basics (new cable, different computer, different USB port etc.)
    If no luck, check to see if your iPod exists in Device Manager as follows: right-click on My Computer, then click on Manage, then Device Manager, then expand the section called Disk Drives on the right hand side and see if the iPod is shown there, if it is, go on to the next stage.
    In the same Computer Management box, click on Disk Management on the left hand side, after a few seconds a new box opens on the right and should show all of the disks on your computer including the iPod. Then right-click on the iPod information and it will give you an option to Change the drive letter or path....click on that and then select Change; select a new drive letter which is not already assigned to any other disc (I picked Z down the bottom), save that then exit and see if it works. Good luck!

  • My computer wont reconize my ipod in recovery mode.

    my computer wont reconize my ipod in recovery mode. when i plug it it it doesnt even show up in itunes. what should i do?

    Contact Apple.

  • You have 2 ipods, please help

    you have 2 ipods, please help
    Hi, I have just bought another ipod, I have now a 60GB video ipod and a new 8GB ipod. Does it pose any problem when synchronising ? Can they have different names ? Thks

    You can name your iPod whatever you like. If you are connecting a second iPod for your own use, just connect it to your computer and it will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update the whole library, selected playlists or you can manage it manually.
    When using a small capacity iPod like the Nano with a large library, you can choose the update option "automatically update selected playlists only" (called Sync Music - All songs and Playlists in iTunes 7). This would allow you to create a playlist specifically for your Nano and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod Nano (around 3700MB for a 4GB or 1800MB for a 2GB). You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes

  • Lost all my songs on my ipod please help me!!!

    please help me I accidentally hit the sync button and it delete all the songs on my ipod but it's still in the recycle bin but I don't know how to put them back on my ipod I tried everything it won't work
    is there a way for me to get my songs back coz I know it's still in the computer some where!! please help me!! I got a 80g ipod.
      Windows XP  

    Ske7ch,
    There's another alternative but I hope you take this as an opportunity to learn an important lesson: Back up your iTunes library as soon as you can because right now you are only one glitch of your iPod away from losing your music entirely.
    And it's only a matter of time before that will happen. Many people come to the Discussions having lost their music in such situations and, believe me, it's not a happy time for anyone.
    If you place any importance on your playlists and the data they depend on, you will want to include your iTunes Library files in your back-up regimen as well.
    Anyways, that's the lecture. What's the other alternative?
    Have a look at:
    MacMuse, "Computer Crashed" #4, 11:49pm Feb 7, 2005 CDT
    Good Luck! But once your music is back on your computer, remember:
    Your music is valuable - please back it up!

  • Itunes isnt recognising my iphone 4 after i restored my phone and updated it to ios7 on windows, but the computer recognises it...please help ppl..m done with all the recomendations given by apple

    itunes isnt recognising my iphone 4 after i restored my phone and updated it to ios7 on windows, but the computer recognises it...please help ppl..m done with all the recomendations given by apple

    if require the new itunes11.1.X
    if you already have that and it's windows then uninstall itunes
    use regEdit you can type that in run or the likes and search and delete all hits you get on itunes
    then reboot windows and install itunes again

  • Itunes isnt recognising my iphone 4 after i restored my phone and updated it to ios7 on windows, but the computer recognises it...please help

    itunes isnt recognising my iphone 4 after i restored my phone and updated it to ios7 on windows, but the computer recognises it...please help ppl

    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • HT1414 How do i fix my itunes? it wont connect my iphone 3g anymore? i tryed to update my iphone 3g 4.3.5 too ios 5.0.1 and it couldnt update no more. now my computer wont find my iphone. please help me.

    How do i fix my itunes? it wont connect my iphone 3g anymore? i tryed to update my iphone 3g 4.3.5 too ios 5.0.1 and it couldnt update no more. now my computer wont find my iphone. please help me.

    Iphone 3g can only go to 4.2.1

  • Trying to download songs from Itunes store. Keeps saying unable to connect. I have tried from store on computer and on phone. Please help i have weddings to do and need these songs!!!!!!!!!!!!!!!

    Trying to download songs from Itunes store. Keeps saying unable to connect. I have tried from store on computer and on phone. Please help i have weddings to do and need these songs!!!!!!!!!!!!!!!

    Hey everybody Amazon.com works perfectly and no problems so Bye, Bye Itunes fix your junk *** program and ****** customer service telling me it's my computer and connection. Oh is that also why my phone can't download them either on a seperate cell network. Nice try garbage In the time it took for them to run me around i downloaded the songs i needed via Amazon.

  • How do I update my iPad2? I don't have iOS 5 but I want the latest and best software update. However, I've plugged into my computer but am unsuccessful. Please help?

    How do I update my iPad2? I don't have iOS 5 but I want the latest and best software update possible. However, I've plugged into my computer but am unsuccessful. Please help, what do I need to do?

    See below.
    http://support.apple.com/kb/HT4972

  • Hello i can't transpire fills in i tune from my old computer to the new one please help me

    hello i can't transpire fills in i tune from my old computer to the new one please help me

    iTunes: How to move your music to a new computer:
    http://support.apple.com/kb/HT4527?viewlocale=en_US

  • Itunes doesnt recognize Ipod, please help, getting frustrated!!

    OK today I plugged my ipod into my computer to update it and magically it started updating, i dont know what I did but it updated the stuff that i have added recently. Yesterday it wouldnt update and it hasnt updated for the past 2 weeks. Now after adding a couple of more songs i go to update it again and nothing happens, now what is going on, I have uninstalled and reinstalled both the ipod updater and the itunes updater, the latest software is on my ipod, i reset my ipod because it froze last night, i dont know what to do, I am close to taking it to the apple store but im not sure what they could do about it. Is there something in itunes that I need to click so my ipod will be recognized, this is getting very frustrating, my ipod use to update every single time that I plugged it in, my computer is fairly new but my ipod has worked several times on this computer before, so please anyone HELP ME!!

    i am having the same problem and i am going insane. It i had my ipod since christmas and never had a problem till this week. When i plug it in the ipod displays the "Do not Disconnect" but itunes doesnt pop up or show that the ipod is plugged in. When i try to update it the updater also says that the ipod isnt plugged in. I know have lost all the songs in my ipod but they are still in my itunes but it wont update. Somebody please help, its been about 4 days and im going crazy.

  • IPod recognised by computer but not by iTunes, Please Help!!

    When i connect my iPod to my computer, the 'do not disconnect' screen appears , and my ipod is shown in 'my computer', but not on iTunes please can anyone help and give suggestions. All replies are gratefully appreciated.
    Kayleigh xxxxxxx

    Peter,
    Peter. I had the same problem (only after installing 5.0.1). The only solution I found to work was to uninstall 5.0.1 and install the previous version that came on the packaged disk.
    Something I noticed, however, is that you can still download and successfully run the most recent iPod updater software. The 9/23/05 iPod updater release works just fine with iTunes 4.7., but it would not recognize the iPod when running 5.0.1 (iPod service error). There is clearly a commong problem with many Windows users with the 5.0.1 release. Don't know if it's a bad iPod service script or what...but it doesn't work for a lot of users (although I, too, had access to the iPod as an external drive in explorer). Haven't seen anything from Apple on it, though.
    Would like to see this fixed, soon!

  • Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows
    iOS: Device not recognized in iTunes for Windows
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • My ipod is stuck on the apple screen and itunes doesnt recongnize the ipod ive help both buttons and it wont even turn off please help

    Please help I just bought this Ipod used and didnt know it was stuck on this screen. It is stuck with the apple screen and wont turn off even after holding bothe the on/off button and home button at the same time, itunes does not even recongnize the device i need to find a way to do a complete restore as if it were just purchased please help

    Have you tried connecting it to your iTunes library in recovery mode using the instructions in this Apple support document?
    http://support.apple.com/kb/ht1808
    B-rock

Maybe you are looking for

  • How to generate a report for all Analyses which conatins a specific column

    Hello Experts I am trying to generate a report of all Analyses which contains a specific column. We are currently using OBIEE 11.1.1.7.0. I have tried to use the command line options using ./runcat.sh, but did not find any arguments that can filter t

  • How to create a TestRunner for FlexUnit 4?

    I just started with FlexUnit 4 today and can already see the benefit of all of the new features.  I am a bit stumped on how to get the initial setup to work.  As far as I can tell, most of the tutorials, walkthroughs, installation instructions linked

  • Was there an outage last Friday?

    My phone stopped working for several hours last Friday, couldn't txt or call, switched to wifi with no success etc.  Was there an outage?  I missed several important calls and need to confirm

  • How can I import Albums from my ipod to iPhoto

    Hi, I am an experienced mac user but don't use iphoto often.I took photos on my ipod and put them in albums and enhanced them and everything.When I imported them I noticed there were tha same photos and everything but they weren't in albums.This is m

  • Issue in fnd_submit.submit_program

    Hi All, I have a requirement of submitting sequest sets dynamically depending upon the user input parameter. So I wrote one shell script in which I will find which set needs to launched. After that in a pl sql block I wrote one cursor to take all pro