My computer failed start-up test. What should I do?

Hello.
My computer shut down suddenly and when I restart it, I wouldn't work. I couldn't open word file. Could not go to internet explorer. It failed start-up test an d hard disk short DST failed as well. Failure ID: 9K3RXF-6G97ML-MFPX0K-60TK03. Product ID. C6S45EA#ABU. Can you help me please?
Many thanks

Hi,            The above Failure ID refers to Hard disk drive failure. You have to replace the Hard disk drive and then reinstall the OS using the recovery disk to get the unit working.  Part Order from the below link https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761 Recovery disk Order http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en

Similar Messages

  • HT1349 when I start my macbook it shows STARTUP DISK FULL, and I cannot do anything else, it doesnt let me get into the computer to delete any programs,,,, What should I do ?

    when I start my macbook it shows STARTUP DISK FULL, and I cannot do anything else, it doesnt let me get into the computer to delete any programs,,,, What should I do ?

    Try starting in Safe mode which does not load all the software that is used in a regular boot. It also runs a disk check. After booting in safe mode transfer or trash stuff you don't really need so as to free up disk space. Be sure to hold the shift key down continously till a progress bar shows on the screen.
    http://support.apple.com/kb/ht1564
    http://support.apple.com/kb/ht1455

  • I remove by mistake the realtek audio device high definition audio bus. Now, the sound of my computer is not working. What should I do?

    Hi! 
    I remove by mistake the realtek audio device high definition audio bus. Now, the sound of my computer is not working. What should I do?

    first go to start-all programs- windows update is at the top of the list follow the prmpts to install microsoft update which is the new version of windows update if microsoft update is all ready installed go there and select custom then let it look for updates
    then if it detects missing drivers it will install or guide you on what to do. If you have an r52 laptop then try this link.
    http://support.lenovo.com/en_CA/downloads/detail.page?LegacyDocID=MIGR-58599 the best of luck.
    2 if that doesnt work then try this  open device manager right click on the sound device you may have to expand sound, video and game controlers on the tab that comes up select properties then select the drivers tab  select update driver.   
    do it this way incase the driver installation failed the frist time it may not ask you to update again if you didnt uncheck the box that came up on frist try.
    3.find a mother board disk and search the disk using explore for ac97 realtech driver. actually windows update should solve it also try there  FIX IT web site there are many automatied fixes there for your use.

  • At every startup, Mac mini desktop freezes for 10 mins before I can start any program, what should I do?

    At every startup, Mac mini desktop freezes for 10 mins before I can start any program, what should I do? The mouse cursor can move around, but the icons are not responding at all. Can't click on anything during the "freezing" period, and this "freezing" happened with every startup. Waking up from sleep mode is OK. Also the systems crashed frequently with any flash-player required pages in web browser. What's wrong??

    Hey,
    Repair Disk permisions...
    Applications > Utilities > Disk utility > Select your Mac OS Hard Drive on the left > Click Repair Permissions.
    Jason

  • To start adobe illustrator what should i do.

    To start adobe illustrator what should i do.

    No problem Sojib, your English is fine.
    As I mentioned earlier, Adobe TV has a series of introductory videos. It would be a good start: Illustrator CC tutorials | Learn how to use Illustrator CC
    Also, if you are willing to pay for some in depth tutorials, Lynda always has good essential tutorials. I think you can even have a free trial, so you can practically watch an entire tutorial then if you don't want to continue with the membership, you can cancel it.
    Link for Lynda tutorial: Illustrator CC Tutorials | Essential Training
    Other than these, it's mostly playing around. Make yourself familiar with the interface and the tools and start googling for beginner tutorials, here's one: http://blog.spoongraphics.co.uk/tutorials/create-a-cool-vector-robot-character-in-illustra tor
    Hope this helps.

  • Dropped my macbook pro, now it makes a whirling noise at start up. What should I do?

    Dropped my macbook pro, now it makes a whirling noise at start up. What should I do?

    Is there any signs of damage on the outside? Under warranty? If no signs and still under warranty, take it to the applestore and play dumb. If there are obvious signs of a fall, then your warranty will be voided and you have the option of paying for the repair or living with the sound and waiting for a failure of some sort.

  • My iphone 4 freeze @ apple logo and dont start up..what should i do to solve this problem???

    my iphone 4 freeze @ apple logo and dont start up..what should i do to solve this problem???

    Trying restoring your iPhone, take a look at this link, http://support.apple.com/kb/HT1414

  • Having startup prob. on my compaq laptop, failed start. up test with hard disk failure help?

    I have a  compaq presario, CQ70-120US , with windows vista
    I haven't made any changes to it,  I took it to my mothers over the holidays and it was working fine.  Like an idiot, i was impatient during a shut down and did a hard kill cause wanted to turn back on to do something else.  After the hard kill i turned back on and it went to black screen ,  then a blue screen with curser, then eventually gave an error box saying Loadkey failed 999.
    so after trying the hitting f10 at startup and doing hard disk test (which failed) 
    memory test passed
    then did f8 to start in safe mode and that ran almost all day with no success
    last thing i tried was hitting f2 at startup and running the start up test,   again memory test passed, then i get this 
    " startup test failed
    hard disk 1 quick  (303)
    so not sure what to do at this point.   i have no recovery disks but if need be i will order them, but wanted to know if this was fixable without doing that before i go that route.
    This computer was given to me and within one week i messed it up.   go figure
    Please help if you can, thanks in advance to anyone who tries to help
    Katie

    Hi,
    Please try last resource, do a HDD self test:
    1. Restart the computer.
    2. Keep tapping the F10 key when the HP logo appears. This will take you to Bios Setup Utility.
    3. Select the Diagnostic tab.
    4. Select the "hard drive self test" option and press enter to perform the test.
    Note: This test takes at least 40 minutes.
    Pass - The hard drive is not damaged.
    Fail - the hard drive is damaged and may need to be replaced.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My computer sounds like a fan what should i do?

    my computer sounds like a fan very loud what should i do

    Reset the SMC.
    Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC on Mac portables with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Still having problems? Replace steps 6 and 7 with the following:
    Reconnect MagSafe power adapter.
    Press the power button to turn on the computer,
    Then reconnect the battery.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • Computer was struck by lightning. what should I change?

    computer was struck by lightning.  what should I change?

    Hi tsysteph?
             Fist of all I would recomend you to buy a surge protector to plug in your expensive appliances is such as TV's and computer. How much damage did your computer sustain? I would open up HP Support Assiant and run systems checks on every thing. Then go from there in repairing it. Surge protectors aborbs excess electricty and prevents it from intering what ever is plug into it. Most sure protectors have a warranty that covers appliances that are plug into it if it should fail. Mine have up to $50,000.00 coverage for damages caused by it failing.

  • My battery life is running out really fast and my computer heats up too much what should I do?

    I have a year old Mac Book Pro Retina 13' and the battery runs out way too fast and the life is not as much as it was a few days ago. As well it started 'breathing' heavily and heating up very fast and very heated. What should I do? What has happened to my computer?

      Charge Information:
      Charge Remaining (mAh):       4308
      Fully Charged:                           No
      Charging:                                   No
      Full Charge Capacity (mAh):   6254
      Health Information:
      Cycle Count:   114
      Condition:       Normal
      Battery Installed:         Yes
      Amperage (mA):          -701
      Voltage (mV):               11862
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):                     1
      Disk Sleep Timer (Minutes):                          10
      Display Sleep Timer (Minutes):                     10
      Wake on AC Change:                                     No
      Wake on Clamshell Open:                             Yes
      Wake on LAN:                                                  Yes
      AutoPowerOff Delay:                                     14400
      AutoPowerOff Enabled:                                 1
      DarkWakeBackgroundTasks:                        1
      Display Sleep Uses Dim:                                Yes
      PrioritizeNetworkReachabilityOverSleep:   0
      Standby Delay:                                                10800
      Standby Enabled:                                            1
      Battery Power:
      System Sleep Timer (Minutes):   1
      Disk Sleep Timer (Minutes):        10
      Display Sleep Timer (Minutes):   5
      Wake on AC Change:                    No
      Wake on Clamshell Open:            Yes
      AutoPowerOff Delay:                    14400
      AutoPowerOff Enabled:               1
      Current Power Source:                Yes
      DarkWakeBackgroundTasks:      0
      Display Sleep Uses Dim:              Yes
      Reduce Brightness:                      Yes
      Standby Delay:                              10800
      Standby Enabled:                          1
    Hardware Configuration:
      UPS Installed:   No
    AC Charger Information:
      Connected:   No
      Charging:     No

  • HT1212 ihave an iod touch tHt is diable. i ithinks its been synced with itunes before but i do not have that computer it was synced with what should i do

    i just bought an ipod touch tht is disabled, i think its been synced with a computer already but i do not have the one its been synced to . I dont kno anything about it other than the fact of who owned it locked themselves out of it and didnt feel like messing with it. how do it get it to wrk iv already tried restoring it, it keeps telling me that it is unable to connect to itunes after its about ten minutes into the reestoration process. what should i do or how can i get this thing to work please help me

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Every time I try to update software my computer freezes when restarting.  What should I do?

    Every time I try to update software my MacBook Pro (running OS X 10.6.8), the computer gets suspended (freezes) when restarting and nothing gets updated.  What should I do to fix the problem?

    Try booting into the Safe Mode. If that doesn't work, set up another admin user account and try from there.
    Safe Mode - About
    Safe Mode

  • I have installed the latest version of Quick Time and now itunes won't start (v8).  What should I do? Will I lose all my music?

    What should I do? Will I lose all my music?

    Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.

  • My laptop keeps re-starting it self what should I do

    I downloaded OS X Mavericks on my Macbook Air today and after a few hours my laptop kept Re-starting it self and it wouldn't stop!
    Please please if anyone can help me PLEASE do ):

    Howdy EtchEn,
    It sounds like your computer will not boot to the desktop and just keeps restarting over and over.
    I want to recommend these troubleshooting steps from the article named:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    Try a Safe Boot
    If you're using Mac OS X 10.2 or later, you can start up your computer in Safe Mode, which includes an automatic disk check and repair. If you're using Mac OS X 10.1.5 or earlier, skip to the next section. A Safe Boot, which starts up your computer into Safe Mode, may allow you to start up your computer successfully using a reduced version of the system software. To do this, follow these steps:
    Start up in Safe Mode.
    After the system has fully started up, restart your computer again normally.
    If the computer successfully restarts, you do not need to do any more troubleshooting. If the issue persists, try Disk Utility.
    Try Disk Utility
    Start from the Recovery System or Internet Recovery (OS X Lion or Mountain Lion).
    If your computer shipped with a Mac OS X Install disc, insert the installation disc, and restart the computer while holding the C key.
    If using a Recovery partition or Internet Recovery (OS X Lion and later): When your computer finishes starting up, choose Disk Utility from the Utilities window.
    If using an installation disc: Choose Disk Utility from the Installer menu.
    Important: If you started from an installation disc, do not click Continue in the first screen of the Installer. If you do, you must start from the disc again to access Disk Utility.
    Click the First Aid tab.
    Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    Select your OS X volume.
    Click Repair. Disk Utility checks and repairs the disk.
    Tip: With Mac OS X v10.6 and earlier, always start up your computer from an Install or Restore disc when using Disk Utility to verify or repair your startup volume. Otherwise, you might see some disk error messages.
    You can also try restting your computers SMC and PRAM:
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    And
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for

  • My time capsule is definetly slow

    Hello all! I just bought a 1TB time, very nice item, but I'm really upset for its performances, it's really too slow. I warmly hope it's cause my configurations otherwise I've to return it to apple so I hope I can get some good suggestion from you sk

  • Message Driven Bean debugging not supported in 9.0.3?

    Message Driven Beans are now supported with the preview of 9.0.3, but you can't debug into them using the embedded container? Will this be resolved for the release version?

  • Why do I have to sign in every time use ibooks

    Since the ios7 update, almost every time I use iBooks it prompts me to sign into my appstore account.  This is new behavior and is aggrevating.  Why is it necessary?  Am I missing something?

  • Ipod nano 5th gen brightness

    Hi, I have an ipod nano 5th gen and i find it to be too bright even when brightness is at the lowest, is there any way to lower the brightness even more? Thanks.

  • Sequence of appling patch

    Hi, Might be it is silly question but I have doubt that is there any sequece for appling patch in oracle application 11i. There is two node installation in my envrionment. Which node should I apply patch first ??? In my DB node : admin server, report