My computer has been through the black screen of death twice after shutting it down today.

Whenever I turned it on, only the sound of the disk running and the startup sound was there but the screen remained black. I've been told to do a hardware check using my system software disc but I'm currently abroad and I wont be getting hold of that disc until mid July this year..
Im scared to shut down my computer again.
**first black screen: Safe mode didnt work. I reset PRAM, shut it down and boot it again. Worked
   second black screen: Again, safe mode didnt work. had to do PRAM resetting a couple times, didnt work. did an SMC reset, worked.
I'm worried none of these will work the next time.

If you don't have an external drive with you, go out and buy one. Make a clone backup of your system. If there is drive failure you want your data backed up. If you have to take your computer in for repairs, you will need a backup in case they wipe your drive.
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Do you have FileVault enabled. Under certain conditions this can cause kernel panics.
Boot into the Recovery Drive (hold down Command R when restarting). Open Disk Utility on the recovery drive and select Repair Drive. Did you see any errors?
You might find this utility helpful as well. http://www.volitans-software.com/smart_utility.php
Make a "Genius" appointment at an Apple Store to have the machine tested.
If it happens again, try taking a photo of the panic result using your IPhone.
You might find this link helpful: Macbook Crashes, Kernel Panics and coping with an Apple “Genius”

Similar Messages

  • Today, randomly my iPhone 5 stopped working. It has been on this black screen with the apple logo and some small white writing at the top of the screen for many hours. I've tried rebooting it and connecting to iTunes but nothing has worked.PLEASEHELP

    It has been on this black screen with the apple logo and some small white writing at the top of the screen for many hours. I've tried rebooting it and connecting to iTunes but nothing has worked.
    PLEASE HELP!!!!!!!!

    It likely means there was still water inside it and something has now shorted out and permanently damaged one or more components.  THE very worst thing you can do with wet electronics is energize them - even a small drop of water inside on any of the circuitry or electrical contacts can cause catastrophic damage.
    Take it to Apple for a free evaluation, but most likely you will need to replace it.  For the out of warranty fee ($269.00 USD) you will get a refurbished replacement (like new, with a factory new screen and battery).  An out of warranty replacement will also re-instate your remaining warranty, or 90 days warranty, whichever is longer.

  • My iphone 5 screen has been cracked. Black Screen. Constant beeping.

    My iphone 5 screen has been cracked for a few weeks but worked fine. Yesterday the screen went black but Siri still worked. When I plugged it in to charge, it started beeping as if i were constantly unplugging it then plugging it back in. At first the screen would light up even though it was black but now the screen wont light up at all. I ordered a new screen to replace it but now I am thinking that it is more than the screen. I plugged it in to my computer and it doesn't recognize it at all. Use the same cord to plug it back in to the wall and it starts beeping again. Could the screen cause all of this or is it a bigger problem? Please help!

    Agree with the comments of FelipeV the crux of the matter is that mpeterson329 abused his phone.
    Also agree with the below comment:
    Peter GillespieSep 1, 2014 9:18 AM Re: My iphone 5 screen has been cracked. Black Screen. Constant beeping.
    in response to mpeterson329
    Have you dismantled the iPhone in any way yet ?
    <Edited By Host>

  • I'm trying to set up my iphone 5s and it has been on the apple screen for hours with no improvement

    I'm trying to set up my iphone 5s and it has been on the apple screen for hours with no improvement
    I don't know  how to restart it...I've tried everything and it won't move away from this screen.  It's been plugged into my computer for a while now, and still does nothing.

    You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808

  • I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

    I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • I restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?

    i restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?

    You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808

  • Anyone else getting the BLACK screen of death after Kitkat 4.4 update?

    Ever since the update, my phone is wacked, like everyone elses.  I got my Samsung Galaxy S4 a month ago.  Beautiful, loved it.  Update happens: I want to pitch this thing as far as I can throw it.
    The phone rings.  I go to answer it but all I have is a BLACK SCREEN which is LOCKED.  I have the lock on the screen, but if the screen is black, you can't see it - and you can't answer the phone!    One day, I got a message, and could not get to that.  Why?  the BLACK SCREEN OF DEATH.
    Someone told me to turn off Samsung Watch On and that has helped with some of the issues.  But I still get the screen occasionally, and my battery life is GONE.
    How do we get rid of this update?   Should I just call Verizon and get a new phone with the OLD software?  I hate this.  I feel like I was the victim of bait and switch.

    ltg123 - did you resolve the problem yet?  If so, let me know how.
    My (hopefully temporary) solution was to turn off my "Lock Screen" ... to do this, go to Settings, My Device, Lock Screen ... and select None.
    The only issue is that you would no longer have any security for your phone and would be vulnerable to someone stealing your phone and having full access to whatever is on your phone that does not require a separate id and password.  Dangerous, yes ... but, for me right now, it's better than not having any access to my own phone!
    The Android update simply sucks ... some heads should roll for allowing such a crappy update to get (no pun intended) rolled out.

  • My iPad has been on a black screen for 2 weeks. All it does when I try to reboot is make the black screen backlighted.

    I have an iPad 2 and it's been working for about 2 and half years without a problem. It's now stuck on a black screen and whenever I try to reboot it the black screen simply gets lighter. It's been completely charged. Went on customer support with Apple for 2 hours and they couldn't help and wouldn't send a replacement. Please help!

    Make an appointment at your local apple store and have them check it out. If the screen or guts inside area dead it's beyond a user fix.

  • Desperate to recover photos from an iPhone5 that has been through the washing machine

    My iPhone5 has gone through the washing machine and I am desperate to recover my photos. Am I better off leaving it in rice for a week and trying it, or immediately taking it to my service provider to try and get it repaired?

    Thanks for your responses. It wasn’t in a waterproof case, just a rubber one. I have insurance, so I am not concerned about my handset, just the photos. It is currently sitting in a container of rice, and I was thinking about taking it apart and putting it back in the rice opened up to try and better dry it out? Then I was thinking of leaving it for a few days and eventually connecting it to my Mac to power it up and hopefully quickly access my photos - what do you think? I am just concerned if I take it straight to my service provider before at least trying this, the data is as good as gone - going off all of the insurance claim disclaimers regarding loss of data during repair!
    Thanks in advance!

  • HT201210 I did the update on my phone and now it just keeps restarting itself over and over again. It will come up with the black screen and apple sign and shut off and bring that up again. What do I do?

    First I did the update under general like I do every couple months. My phone came up with a screen, at the end of the update, that had a picture of the itunes icon and a picture of the iphone cord like I was supposed to connect to itunes. I did and itunes said that my phone needed to be "restored" to be reusable again, and the only option it gave me was to click the restore button. So I did and it went through a 30 minute restore session. Now my phone just shows the black screen with the apple icon and restarts over and over again. Clicking the buttons does nothing. It has been doing this for hours now. What do I do?

    The screen is telling you to connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • My computer has been getting the pin wheel and moving very slow since the i downloaded yosemite

    Whenever i have a video playing from my internet browser it causes my computer to pin wheel and go into thinking mode with all of my apps that are open. It moves very slow and i have to force quit everything and reboot my computer to make it act normal. this all started after the software update. Any suggestions>

    Mine has been moving extremely slow, too.  I had a problem downloading and installing Yosemite and after many conversations with Apple Care, the solution was to remove the 3rd party RAM I had just installed prior to the upgrade.  That solved the download/install problem, but now it's slow as anything.  I opened my activity monitor and sure enough, the memory pressure is at full load so I have to install more memory.  The trick is to make sure it's truly compatible.
    Have you checked your activity monitor's memory report?

  • Can I sell an iPhone that has been through the washing machine?

    I have a 16 month old iPhone 5S that went through the washing machine. Screen busted and now it doesn't work. I was wondering if it was still sellable. Meaning, is there anyone out there that would buy such a phone and be able to use the parts?
    I'm not trying to dupe anyone, I'm going to be up front about the condition, but I wasn't sure if any part of the phone still had value in it's current state.
    Thanks for any help.

    Yes, you can sell it as "for parts or not working" (that's what eBay would have you list it as). But you'd probably only get $10-$20 for it. Also, although it's not working, do as much of this as you can: What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support.

  • Help solving the Black Screen of Death

    Hello There!
    I have an HP Touchsmart 610-1100z 3 days ago I put it to sleep and when I tried to wake it up nothing happened.  I restarted it and it was just a black screen, no HP logo ect, but I could hear all the fans and drives working.  I checked the light issue with a desk lamp and revealed that is not the problem.  I then tied the BIOS F10 to F5 work around with no luck.  I have gotten it to boot up twice since then by repeatedly turning it off and on until by sheer luck it just boots up.  When it boots up there is absolutely no issue but clearly something is eskew that I would like to fix so that I don't live in fear of turning off my computer.  Does anyone have any ideas?

    Hello Vman009,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are getting a blank screen when you boot your HP Touchsmart 610-1100x All-In-One Desktop PC. I am providing you with a link to an HP Support document: HP and Compaq All-in-One and TouchSmart Desktop PCs - Screen is Blank after Starting the Computer, which addresses what appears to be the issue you are describing. I would recommend that you review the document and make the adjustments recommended.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • While running my macbook air it suddently gets the blue screen and i have to shut it down

    can i do to fix it ?

    power off then:
    perform SMC reset
    SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    report back
    What initiated this? anything?  
    If same contact Apple for free in shop diagnostic and possible repair.

  • My iphone3gs shuts off when i jump between apps or run certain apps...  even with 90 percent it will shut down and shows vertical lines through the black screen...  any ideas what this could be?

    My iphone 3gs shuts off when flipping to different apps or running certain apps.  If it crashes badly I need to plug power to the device to bring it up.  This happens whether i have even 90 percent battery life.  Any idea as to what this may be? 

    Sounds like a major hardware problem.
    If no change after restoring your iPhone as a new iPhone or not from your iPhone's backup, there is a hardware problem.

Maybe you are looking for

  • Transparent Gif Background?

    Hello, I've been trying to make a gif with a transparent background, however I've been having a few problems with it. While the gif does start fine and the background is transparent at the beginning, after a few frames the background color would come

  • Procedure works in debug mode but not normally

    I'm scratching my head on this and would appreciate any help as to what is happening. We have client code that calls stored procedures on an Oracle 10g database. When I run it normally the procedure does not behave as expected. If I try to debug the

  • Images in button not shown properly

    I have imported a quicktime file which was exported from FCP. The final cut portion is strictly jpeg files, no movies. I have made chapter markers in FCP. So in DVD Studio Pro, I created a button and chapter index, then selected a template. When I go

  • Photoshop Album Starter Edition doesn't link to Elements 3.0

    I own both Adobe Photoshop Album Starter Edition and Photoshop Elements 3.0 and they run fine independently. At various times while in album starter, when I choose "Go to Standard Edit Photoshop Elements" to edit a photo, it will offer me to purchase

  • Balance confirmation

    Balance confirmation letter on any particular day. On selection can print the list of 'C'form, TDS certificate to be received, expired BG, etc so, how to maintain it in system??? I want information/ suggestions for standard and Z development both....