My computer has more than one login. Now when I log out it just brings up a blue screen and won't let me do anything eles. What's wrong with it?

Now it just brings up a blue screen and it won't
Let me do anything eles. What's wrong with it. This is the second time it's done it today

I am experiencing the same thing on log out, not all the time but too often. I can get going again by shutting down with the power button, waiting 10 sec. then pressing the power button to boot up again. I have run Disk Utilities, Techtool Deluxe and Disk Warrior which all indicate everything is OK. So I am hoping someone will be able to help us with this issue.

Similar Messages

Earlier i tried installing additional guitar lessons on my mac pro but but nothing is happening now my garageband is open but shows no screen and won't let me quit it garageband what do i do?

earlier i tried installing additional guitar lessons on my mac pro but but nothing is happening now my garageband is open but shows no screen and won't let me quit it garageband what do i do?

Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more appropriate forum for your product.

My MacBook Pro is now asking for a login. When I enter my passcode, it goes to a blue screen and back to the login screen. I saw several older posts, but nothing recently. I am running Snow Leopard.

My MacBook is now asking for a password. When I login, it loops to a blue screen, and back to the login. Incorrect logins create a shaking of the login screen. I tried restarting with the shift key depressed, with no luck.

I performed a hard shutdown, and upon start I could access my system without logging on. I'm not sure what caused the issue, but I have not booted up in almost a week.

How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

Error using JAX-WS to consume a WS that has more than one parameter

I am trying to create a web service proxy in JDeveloper using JAX-WS for an OAM web service from a WSDL (identity/oblix/WebServices/CompositeWebServices/WSDL/um_view_interface.wsdl). I received the following error when I try to run the proxy:
Exception in thread "main" com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: SEI test.profile.OblixIDXMLPortType has method oblixIDXMLUmView annotated as BARE but it has more than one parameter bound to body. This is invalid. Please annotate the method with annotation: @SOAPBinding(parameterStyle=SOAPBinding.ParameterStyle.WRAPPED)
at com.sun.xml.ws.model.RuntimeModeler.validateDocBare(RuntimeModeler.java:1267)
at com.sun.xml.ws.model.RuntimeModeler.processDocBareMethod(RuntimeModeler.java:1256)
at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:628)
at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:416)
at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:267)
at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:715)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:427)
at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:703)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:347)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:409)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:330)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:312)
at javax.xml.ws.Service.getPort(Service.java:92)
at test.profile.OblixIDXMLService.getOblixIDXMLPort(OblixIDXMLService.java:79)
at test.profile.OblixIDXMLPortClient.main(OblixIDXMLPortClient.java:23)
Process exited with exit code 1.
It seems like the OAM web service (um_view_interface.wsdl) is not WS-I BP 1.1 compliant. It expects two elements under the body. WS-I BP 1.1 specifies that there should be only one child in the body of the element.
The expected request body would look like this, there are two elements under the body:
<soapenv:Body>
<authentication xmlns="http://www.oblix.com/">
<login>loginname</login>
<password>pass</password>
<domain>dc=test,dc=org</domain>
</authentication>
<request application="userservcenter" function="view" mode="dataonly" version="NPWSDL1.0" xmlns="http://www.oblix.com/OblixXMLLocalSchema">
<params xmlns="">
<ns1:uid xmlns:ns1="http://www.oblix.com/">cn=tester,cn=Users,dc=test,dc=org</ns1:uid>
</params>
</request>
</soapenv:Body>
Has anyone encountered the similar problem? Is there a solution to this problem?
Your help is appreciated!

Can u pls share ur solution if u have found a way 2 create a web service with 2 ports.I have not yet found a solution so far and nobody reacted to all my posts in the different fourms. It seems nobody is implementing web services with two ports using the EJB annotations technology.

Auto creation of child requests when parent request has more than one group

Hi,
I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
Please let me know.

No not possible OOTB in current version. Check {thread:id=2318652} for more information.
-Bikash

An operation has more than one setup activity-error message

Hi All,
I have a queue which is failing and giving error message "An operation has more than one setup activity".
I have debugged it but of no use.
In SAP R3 planned order data is created and is being sent to APO system through a CIF interface in queue.
In APO system,planned order data is integrated to process order,during this they are getting the subject mentioned error.
Kindly help me how to rectify this error.
Please help...Thanks in advance.

Hi,
Back again...hopefully below should solve your issue.
Check if any of the co-product (of the main assembly) has GR processing time. Are there any phantom component in the BOM, if yes, please check the co-products in phantom assembly as well.
Any co-products /phantom assembly should be assigned to APO related Produce phase.
Otherwise, you can remove the GR processing time for co-products (make it zero) and sync the master data and then try.
This should solve the issue.
Let know if this helps.
Regards,
NR

Lumia 520 SMS- when a contact has more than one nu...

Hi- when calling a contact who has more than one phone number it is easy to choose which of the numbers for that contact to use, but when sending SMS there is no option to choose. How does the SMS system decide which of the available numbers to use?
Solved!
Go to Solution.

If I do the following steps: Messaging > + >To + > Select contact > I see all numbers listed for the contact.
If I do instead: People > Contact > SMS, the number entered as "mobile" is selected by default. If you want to change it to "mobile2", you need to go: ... > switch number and select from there.

VLD-0201:Table has more than one primary key

hi
i'm working with OWB 9.2,I was imported the table from database,when i validating that it is giving message:
VLD-0201:Table has more than one primary key
vld-0209:Duplicate unique key i.e:cust_acc and SYS_C00435 detected.
Can i use this table and generate the mapping with out any errors?
Any help will be very generate.

Hi Ashok,
I'm quite curious how you managed to get a table with 2 PK's.
I tried it myself:
=======================================================
SQL>create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date);
create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date)
ERROR at line 1:
ORA-02260: table can have only one primary key
SQL>ed
Wrote file afiedt.buf
1* create table x(c1 number constraint uk1 unique,c2 number constraint uk2 unique, c3 date)
SQL>/
Table created.
=====================================================
As you can see, trying to create a table with more than 1 PK is impossible. With Unique Key, that IS possible (see second example).
I don't expect mappings to function properly with such an error message.
Is it possible for you to drop the table in the database, correct the definition of the table in OWB and then deploy that corrected version to the database?
If on the other hand the table on the database is correct (i.e. has only one PK) then the import into OWB obviously did not go well and I'd suggest you drop the imported definition and try to import it again.
Cheers, Patrick

Material has more than one plant, only show the price for the first on

Hi:
I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
plant :de87 Material: 60020601 Standard price: 1237.00
plant:PT01 Material :60020601 Standard price: 634.00
In the report I am seeing DE87 with the standard price :1237.00 .
I am extracting from the 0MATERIAL_ATTR
Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
rgrds
Kumar

Hi:
Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
plant:PT01 Material :60020601 Standard price: 634.00
In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
Rgrds
kumar

Since downloading the iOS on my iPad, I cannot download more than one pdf from mail to iBooks. I have to shut down y iPad and start again. Any suggestions?

Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks. I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system. Any suggestions?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

My iPhone 5c has a broken screen and won't let me swipe. I got a new iPhone 5c, but want my stuff to backup to it. I haven't backed my old one up in over a year because the storage is full. How would I back it up to iCloud on a Dell or Toshiba computer?

My iPhone 5c has a broken screen and won't let me swipe. I got a new iPhone 5c, but want my stuff to back up onto it. I haven't backed up my old one in over a year because there's not enough storage. How would I back up on iCloud to a Dell or Toshiba computer?

Hi Linda Loo Loo,
If you have backed up previously to iTunes on a specific computer, even if it has been a while, you may be able to still backup even if you are unable enter the passcode on your iPhone due to a damaged screen. You may find the following article helpful:
If you have previously synced your device with iTunes, you may be able to reset the passcode by restoring the device:
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
When the backup and sync is complete, restore your device.
When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup".
Select your device in iTunes and choose the most recent backup of your device.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

I have music files by the same artist but they are listed in itunes in more than one album hod can i add then to just one album pf that artist

I have music files by the same artist but they are listed in Itunes in more than one album hod can i add then to just one album of that artist I am using windows 8.1 .

iTunes will group songs into an album when:
All songs have the same value for the Album and Artist field, or
All songs have the same value for the Album and Album Artist field
All songs have the same value for the Albumfield and the Part of a Compilation flag is checked.
If you want to group all the songs by one artist into a single "album" you can do so by following one of these rules. However, it may be more useful to create Playlists to group music like this and retain the original release information. One Smart Playlist for each artist you're interested in would meet this need without over-writing information about the source albums.

I have a mac air and it says my star up disk is full, now when I log in it just has a blank white lit screen and I cannot go further

After logging in, theres just a blank white backlit screen and I cannot go further. It also has been showing on the screen
that the startup disk is full. I already tried diagnostics and it says hardware is fine.

You will have to erase your drive because it has a corrupted directory resulting from allowing the drive to become full.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!

My computer has more than one login. Now when I log out it just brings up a blue screen and won't let me do anything eles. What's wrong with it?

Similar Messages

Maybe you are looking for