My computer keeps going to power saving mode and swithing off

''dupe of https://support.mozilla.org/en-US/questions/918076''
as above

i dont but I THOUGHT IT WAS A GENERAL HELP FORUM ......OBVIOUSLY i wasted my time

Similar Messages

Monitor Goes into 'Power Saving Mode' HDMI

I have an LG monitor (IPS237-BN) which always goes into 'Power Saving Mode' when I connect my MacBook Air to it via a Thunderbolt-HDMI connection.
Sometimes it actually connects and I can mirror my displays (or count it as another), most of the time it doesn't. I have used different cables etc. I cannot install the driver because I do not have a CD drive.
Any help is appreciated, thanks!

Hi,
Update the the video driver from the NVIDIA web site.
Your PC bios should be 5.29 or higher so that is something to check.
The Truckee motherboard was recalled but you might be past that date.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Power saving mode / and broadband disconnecting pe...

I have recently started using the power saving mode and noticed that our BB speed has gone down to 2.4 from 2.9. While I know this is not a big reduction we had a lot of problems earlier in the year with V04 messages cos our speed dropped to around 2 and it took a lot of engineers visits to get it back up to 2.9. Also I noticed that our HH keeps disconnecting (at the moment it says it's been connected for 2 days) although this has been happening since we signed up to BT and not since using the power save mode..
Do you think it is the power saving mode or the fact that the HH keeps disconnecting periodically that is resulting in our speed reducing? I would really appreciate your help as I desperately want to avoid getting the dreaded V04 error messages!
Thanks
Debbie

Hi the variations in your speed are being caused by the restarts of your hub nothing toowith power saving mode you need to find the causes of thedisconections
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7.

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7. When will you respond??

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.
Now when Firefox hangs, is this randomly, on specific websites, etc.? You can also read [https://support.mozilla.org/en-US/kb/Firefox-hangs https://support.mozilla.org/en-US/kb/Firefox-hangs]

Using both power saving mode and offline mode caus...

So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
Any help?
Rob
PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
I believe it is a firmware bug that causes this problem.

Unable to restore screen when laptop goes into power saving mode

Toshiba Satellite M45 running MS Windows XP, When laptop goes into powersaving mode and screen goes black, if i do not move the mouse in a nanosecond I am unable to restore the screen. Try my ususal fix of pressing the now amber mechanical start button, but I only hear the computer start to whir, but the black screen continues. I have to do a hard close and consequently loose all unsaved data. Then do a mechanical start and return to the desk top with a message that the computer programs where not closed properly.
I have been told I need to change the power saving mode options. Is this correct? How do I do this? Thanks, Blooming

I tired to do a system restore for two different dates and got a message that MS was unable to restore to that/those dates. - no explanation.
Linda, sometimes the restore points get corrupted. The fix is to turn System Restore off and then on again. Unfortunately, that removes all the previous restore points.
How to turn off and turn on System Restore in Windows XP
You might try running the System File Checker.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-Jerry

Domain Controller Keeps going to Power Safe Mode

Have you checked the power supply?

Hi guys,
My secondary domain controller cannot reboot fully but rather keeps booting into power safe mode hence i have failed to start it up.
Has anyone experienced this problem? or Have any suggested answers.I will be very gratefull.
Bridget.
This topic first appeared in the Spiceworks Community

How do you turn off power saving mode on a Officejet 6000

I have 5 Officejet 6000 printer contected by using the ethernet port. They print fine when not in power saving mode. When they go into power saving mode and a print job is sent to them, they do not print. You have to power off and on the printer for the job to print. I need to turn off the power saving mode on these printers. Computers sending print jobs are XP and Window 7.

I am not aware of a way to turn that feature off completely since it does not have a front panel.
However, I suspect largely that the issue is with DHCP IP (automatic) settings. Printers in general, with some routers, have issues with DHCP and standby where they no longer communicate using DHCP information.
I recommend setting static IP addresses for any printer on a network as it prevents most network issues with printers from occuring.
Print a network configuration page by holding the network button for 3 seconds and then releasing it. A printout should be printed with the printers IP address.
Once that is done, enter that IP address into the browser on a computer as if you were going to a site. Once that is entered, go to that site and the printer status page should be loaded.
There should be a Network option at the top. Select that option.
On this page, somewhere on the left, there should be an IPv4 option in a wired section. Select this and it will give the option for automatic or manual IP setup.
Select Manual IP setup. Enter The IP address and subnet mask from the printout. You can enter the gateway and the DNS servers, but they aren't really used since this printer does not have any web functions.
Click apply and you should get a success message.
At this point, the printer should have a static IP address and the issue of it not responding after entering standby should no longer be present.
PrintDoc's post has similar steps for a wireless version of the same printer. The only step that would really be different is choosing Wired instead of Wireless on the setup page.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

LG Monitor stuck in Power Saving Mode

I just purchased an LG W2252TQ LCD monitor and I am using a mini-dvi to dvi adapter and a DVI cable to connect to the monitor. My macbook detects the monitor, but when I connect it, the monitor enters "Digital Power Saving Mode" and is asleep. No picture whatsoever. - I saw another post who was having similar trouble and he solved it by using a mini-dvi to vga adapter, but I'd prefer to use a digital connection. Any help?

kiamatthews: I bought the same LG monitor for my daughter's MacBook and I couldn't get it to work. Then I read your post and resigned myself to buying the mini-dvi to VGA adapter. Luckily, I stubbornly tried one more time and after a bit of fiddling I finally succeeded in getting it to work. (My daughter has the same setup as you i.e. LG W2252TQ LCD monitor connnected to a MacBook using the mini-dvi to dvi adapter and a dvi cable connected to the monitor.) I'm a relative newbie to Macs, so I'm not sure I've remembered all the steps, but here goes.
When I first connected them, the LG showed the background from the MacBook, but nothing else (no icons, no windows, etc). Eventually I brought up system preferences - displays, and some sort of monitor resolution window appeared on the LG, but it was different than what was on the MacBook. The "displays" window on the MacBook did indicate both the MacBook monitor and the LG, which it showed as 2252TQ or something like that. Anyway, I checked a box labelled "Show displays in menu bar", which then put a monitor icon on the menu bar. When I clicked on that, there was a line allowing me to select "mirror" which I did. Immediately, what was on the MacBook display appeared on the LG. After I picked myself up off the floor, I was able to change the resolution for the LG to its maximum setting and after about 2 seconds of blank screens, it reappeared with everything working as it should.
I hope that the above description is sufficient to get yours to work as well.

Officejet pro 8500a power saving mode

My Officejet Pro 8500a goes into power saving mode too soon and too frequently. Is it possible to turn this feature, power saving mode, off?

Yes you can go into the setup menu, to preferences down to Energy save mode and turn it off.
Although I am an HP employee, I am speaking for myself and not for HP.

Nokia N8: Possible Power Saving Mode Bug

Dear All,
For the past week, I've change the way I use my Nokia N8. I decided to set it up in power saving mode during the evening. There is no point for it to be on 3.5G if nobody is using it. Unfortunately, I seem to have hit a problem. At the moment, my N8 is using a pay as you go sim card from O2 and this card is in the phone 24/7.
When I activate power saving mode, the phone re-registers with the network and the maximum speed it will have will be EDGE. In the morning, when I take my phone I disable power saving mode and the phone re-registers again with the network.
Having said that, on multiple ocassions, my phone showed some worrying symptoms. For example, a few das ago, when I disabled power saving mode, the phone did not show the 3.5G icon and I could not make any phone calls. The coverage was up and down. You might say that, it did not show 3.5G because you had no 3.5G you idiot. That is not true, where I live, there is 3.5G everywhere.
I was shocked that I could not make any phone calls. After a few reboots and taking SIM card out, I managed to get the phone in working order.
Today, the same thing happened. I managed to fix it just a few moments ago. It seems that the power saving mode option has an implementation problem or O2 does not like the way the N8 registers to the network when you enable and disable the said feature. Has anyone encountered this???

@m80116, this may well be a solution, but could be problematic if in a weak reception area where only Edge is available ? You could lose data connection completely ! I tend to use Dual mode, and generally don't have an issue, but certainly for anyone living and working in a very strong 3 or 3.5G area it may work very well, wish I had the luxury of being able to use 3G Only
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

When will the Verizon HTC One (M8) finally get the Extreme Power Saving Mode software update?

Other carriers (AT&T, Sprint) already have it, but Verizon is taking forever apparently.
When will Verizon customers be able to download and use this new mode?
Thanks!

I recently bought an HTC One m8 from Verizon, and like many other customers the Extreme Power-saving Feature was one of my keys factors to deciding to buy. I was very disappointed to learn after the fact that Verizon had not included, and has no intention to include the feature in the future. (Mentioned in other threads in the forum). I've read the argument made that Verizon never advertised the feature and never said it would be included with their version of the phone, but they also never went out of the way to warn perspective buyers that the feature, which is part of the m8 phone on other carriers and marketed by HTC as a part of their phone wouldn't be included. When people are researching phones before they decide what to get they read what features the manufacturer(s) have designed and implemented in those phones, not search to find all the things the carrier may have stripped from the phone.
It's impractical and offensive to tell a customer that its his/her responsibility every time they buy a phone from them to dig deep into website forums and look for what they decided to remove from it that the manufacturer had built, and advertised to be in their phone. This is the type of thing that is bad PR for Verizon, and something that will make customers go to other carriers. I don't want to offend some of the nice Verizon employees who want to help their customers and simply don't have the power to correct the issue themselves, but its in Verizon's best interest to either fix their network to work with this feature, or find/hire someone else who will. Doing it soon before the issue escalates and news of Verizon's statement to do nothing to correct the issue for their HTC One m8 customers spreads like wildfire and burns them.
I hope someone at Verizon doesn't let the rest of the company go on ignoring the issue and steps up to find a way to enable Extreme Power Saving Mode on the Verizon Network. Right now the impression many people have is something along the lines of: now that you've bought a phone from us, and signed up for a contract with us we don't care what you want and think.
In the meantime it would be a good idea to enable the option in the phone with a popup message when enabled that reads something along the lines of: Verizon has concluded that in some cases Extreme Power Saving Mode can cause network issues. If you experience network issues please disable extreme power saving mode and return to one of the other power modes. Verizon will continue to research the issue, and will institute a fix if/when a solution is found.

Hi Guys 'n' Gals! I have a problem with my computer going into 'Display Sleep' mode and it actually goes into full sleep mode. anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never go into computer sleep

Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.

New LG Monitor Screen Image Keeps Shifting a few pixels left and right / goes into power save mode

I just purchased a new LG Computer Monitor from Best Buy today and hooked it up to my PowerMac computer. Shortly after setting it up, the entire screen image started sporadically shifting left and right a few pixels. And then, at seemingly random times, it'll shut itself down, going into power save mode. I checked the cables to make sure they were secure and they seem to be. Could there be some sort of interference that's causing it? Or would it be the graphics card? My computer is only a couple years old. Please help!

Do you have another computer you can plug the monitor into to test?
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

How do i correct iphone that keeps going into power off mode

how do i correct iphone that keeps going into power off mode

The screen will flicker while in lock mode then the slide to turn off screen will appear. This happens without touching any button or screen.

My computer keeps going to power saving mode and swithing off

Similar Messages

Maybe you are looking for