My computer restarted while I was updating my software from OS4 to OS5 and now my ipod is froze in a way that it shows the symbol that I should connect it to itunes. I connected it but itune is not recognising it. I have tried to reset but it nothing.
My computer restarted while I was updating software from OS4.1 to OS 5. Now my Ipod touch is just frozen. All it shows is the usb connection to itune symbol. Itune does not recognise. I have done the reset but nothing happens after the apple symbol shows up and back to usb and itune symbol. Help please.
See if placing the Ipod in recovery mode will allow iTunes to see the iPod so yu can restore the iPOd.. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Next try DFU Mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes
Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system. Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well! Good luck ... -
My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.
Hi there Schusski,
I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below.
iOS: Restore errors 4005, 4013, and 4014
-Griff W. -
I was updating my software on my iphone 4 and it crashed so it recovered it and i restored it from its back up. However I have lost all my music and my apps but not my pictures. How can i get my music back. I did not remove my phone from the computer until it had said it had finsihed.
Media and apps are not part of the backup. They need to be re-synced from your itunes library or re-downloaded from the store.
-
i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??
Go elsewhere:
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?
I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?
I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.
-
I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me
Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.
-
A message cannot be seen on my incoming emails. I can only view the message if I click on reply. Also any links attached to email will not open. I have tried everything to solve the problem but not able to.
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Updated to iOS7 on my iPad mini and now anything i type there is a 30 second lag on the letter appearing? Bug already? or does it need a full reset?
I have read that if you go to Settings, iCloud, and turn off documents and data that this will help with typing.
-
The little 'E' that was next to my signal bars has dissapeared and now i can't send texts, make calls or go on the internet. WHY? HELP!
As suggested make sure "cellular data" is ON and you have valid cellular data plan.
That "E" sign only shows the network (Edge) or 3G (if you are in the 3G network), but it has no relation to you not been able to make regular calls or sending regular texts with network signal (in the form of bars) being present.
Double check if you have credit in your phone (in case of pre-paid) or if you have reached your limit (in case of post-paid) -
hi i am having difficulty with my iphone 4s it has been on charge for a number of hours but is just flashing the apple logo continuously i have tried to reset but nothing seems to work can anyone help me please
What is a hard reset? There is nothing in any of Apple's documentation that refers to a hard reset.
There's a reset, a restart, and a restore.
Please explain EXACTLY what you did. -
i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help
Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
iTunes will not open, I keep getting the error 7 (windows error 193).
I have tried many recommendations, erasing folders, reinstalling it many time but nothing.
I have a windows 7 Lenovo ideapad.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
tt2 -
I recently updated my software to ios6 & have now found camera not working on my ipad. We have tried resetting & numerous other solutions but nothing has helped. Can anyone tll me why this has happened & ow o I fix it, thanks
1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the Camera app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar
Maybe you are looking for
-
Automator failing to activate running under OS X 10.8.2
I have a MacBook Pro 13" running OS X 10.8.2. Everytime I try to activate Automator, it fails to open and displays a Problem Report. I have never run Automator in OS X 10.7 Lion and this is the first time that I have tried to run Automator since upda
-
I created a document using Live Cycle Designer ES 8.2 and when I save it to a pdf form there are certain restrictions that I can't figure out. Changing The Document: Not Allowed Document Assembly: Not Allowed I am opening the pdf using Acrobat Pro 9
-
Can we change the prompt of textfield using personalization
Hi, I want to change the prompt of a textfield using personalization. I changed the prompt using personalization, but still it is showing the old value. Also I changed the rendeered prompt of a field to false and still that filed is coming up in the
-
I've been polling for helpdesk tickets by utilizing the example found in the following link for several years and for some reason a recent update to Spiceworks has caused me to not be able to authenticate my user and pull the feed. Here is the scrip
-
Query conversion from access to sql server
I have sql in access I need to convert to sql server . I am stuck three days please help me TRANSFORM First(Eval1to4.answer) AS FirstOfanswer SELECT Eval1to4.evalOid, Membershiptypemap.mappedvalue as membership, First(Eval1to4.answer) AS [Total Of an