My computer's Itunes photos not listed in screen saver.

It was working until I switched folders but since then its not.  I have turned on Home Sharing on both my Apple TV and in iTunes on my computer and selected a valid folder with photos in it.  Both PC and AppleTV are wired to my network router and I tested my connections and they are working.  The computer is on with iTunes running.  Still under Photos in screen saver it list only National Geographic, Flowers, Flixr, iCloud.  no "Computer".  Am I missing something?

Yes all that has been done.
In fact I had it set up and working in the past but soon as I tried to change which folders are shared none show up. I shared the photos, rebooted apple tv and the router... Nothing. 

Similar Messages

  • HT1386 itunes does not list ipod touch as a device

    itunes does not list ipid touch as a device

    iOS: Device not recognized in iTunes for Mac OS X
    or
    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Accidentally deleted bonjour from my computer.  iTunes will not open.  Help Please.

    Accidentally deleted Bonjour from my computer.  iTunes will not open.  Running Windows XP. Help please.

    Uninstalling and then reinstalling your iTunes should also get your Bonjour reinstalled.
    For the reinstall, use an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    ... or you could get it back via your Apple Software Update for Windows.
    If you'd prefer not to uninstall iTunes, try the following procedure.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

  • I want to update my IPODtouch, but it will erase all my data. How do I sync my ipod to a new computer so itunes will not erase my data???

    I want to update my IPODtouch, but it will erase all my data. How do I sync my ipod to a new computer so itunes will not erase my data???

    Follow these instructions. When you restore the iPod from backup as the article says your iPod will also be updated.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My ipod touch is connected to the computer but itunes is not recognizing it. help please !

    My ipod touch is connected to the computer but itunes is not recognizing it. I need help please. I've tried restarting both my ipod & the computer and also unistalling itunes and loading it again, nothing is working.

    Assuming you have a PC, start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognice it when I try to connect it. Is it incompatible with windows 7 or itunes?

    Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognise the device when I try to connect it. Is it incompatible with windows 7 or current version of itunes?

    It should still be compatible.  Have you tried plugging it into a different USB port using a different cable to see if that helps?  Perhaps, try it another computer as well to see if it's recognized there.
    Otherwise, start by checking to see if it's even recognized in Device Manager.  See this article for details.
    http://support.apple.com/kb/ts1496
    B-rock

  • Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

    Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

    Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
    Here is the Apple support article that may help you.
    http://support.apple.com/kb/TS1717
    or my usual solution for Windows Users.
    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck!

  • My Apple TV 6.1.1 is logged into iCloud but says it's not when I try to log into using Photo Stream as my screen saver. Any ideas?

    When I select Photo Stream as my screen saver, it prompts me for the password. Despite the password working for logging into iCloud and iTunes Music Store, it always says it's incorrect for Photo Stream. Help!

    Eric,
    None of this has worked.
    My Apple ID and password work with everything else. I have a good Internet connection. No Firewall active from my IMac.
    LIke I said, I haven't installed anything recently and FaceTime ver. 1.0.5 on OS X 10.6.8 was working fine prior to yesterday.
    I restarted my IMac to run Mavericks and FaceTime 3.0 under OS X 10.9.4 is working and I was able to login and use FaceTime on Mavericks with no problem.
    For some unknown reason FaceTime on IOS and on my Mac were asking me to login into FaceTime when I haven't had to do this for quite sometime.
    Older FaceTime 1.0.5 all of a sudden has decided to be a problem with login on my IMac under Snow Leopard.
    The only thing left I am going to try is the two-step Apple ID verification process where I can use a app specific password, but Apple makes you wait three days before completing the two-step verification.
    If this doesn't work, then I do not know what will solve this issue and now I made my Apple ID login process more complicated than I really wanted it to be.
    I purposely stayed away from using the two-step ID verification login.

  • HT204655 how do i choose a photos folder for my screen saver.  iPhoto used to be listed as a dropdown choice.  now only folder is listed.

    how do i choose a photos folder for my screen saver.  iPhoto used to be listed as a dropdown choice.  now only folder is listed.

    You cannot take a folder out of the Trash to your Desktop without erasing the one on the Desktop. You need to first change the name of the folder on the Desktop. Or you can open the folder that's in the Trash and drag the files onto the Desktop assuming there aren't too many of them.
    But if you have a duplicate on the Desktop why do you need to remove the one that's in the Trash?
    If you feel you must take the folder out of the Trash, then you need to rename the duplicate that's on your Desktop.
    If you wish to put the folder back where it was when you deleted it, then open the Trash window, select the folder, then CTRL- or RIGHT-click and select "Put Back" from the context menu.

  • "Windows could not start this screen saver"

    My timeline playback gets interrupted by Windows' dummy screen saver consisting of a blank screen with the message "Windows could not start this screen saver".  I'm running Premiere CS 5.5 on Windows 7.  I only see this message while Premiere is running so Premiere must be doing something that blocks the current screen saver but doesn't block Windows from attempting to start it.  Is there a way to keep Windows from attempting to start the screen saver at all (other than selecting no screen saver in Windows) so it doesn't interrupt playback?
    Roy

    years ago screen savers helped keep crt monitors from getting 'burned in' areas of dead pixels etc from the screen being on a static image for too long. over the years this problem has been almost totally eliminated by monitor manufacturers i think.
    i know people who worked in pro graphic houses that never turned off their computers, never used screen savers, and never did power management stuff ... the computers were on 24/7... and they never had problems.. and that was like more than 10 years ago.
    i do have a nice snake screen saver that is static and / or animated if you want to try it out, but frankly, i would turn all that stuff off ( power management, screen saver ) and either leave your computer on all the time 24/7, or else just turn it off when you leave the computer... turn it back on when you want to use it.  is only a button on tower to turn on and off usually.. easy.
    let me know if you want snakes though... they are very cool and scary !

  • Preferences error, could not load Desktop & Screen Saver preference pane.

    Preferences error, could not load Desktop & Screen Saver preference pane.

    Close all windows and quit all applications.
    Hold the option key down and click the "Go" menu in the Finder menubar.
    Select "Library" from the dropdown, then "Preferences" folder.
    Look for these three files.
    com.apple.screensaver.plist           
    com.apple.desktop.plist
    com.apple.systempreferences.plist
    Right click each  one of those and select " Move To Trash" from the contextual menu.
    Restart the computer.

  • Screen Saver does not use selected Screen Saver when activated

    Screen Saver does not use selected Screen Saver when activated. After "Start screen saver" elapse time has been reached, a blank black full screen is displayed. I can activate the selected screen saver by using the hot corners function. Any help with this matter will be greatfully received.

    Hi again sassey,
    You're assuming correctly. Simply change the settings so that your screen saver activates before the sleep settings.
    Hope this solves your problem...

  • Could not load Desktop & Screen Saver

    I got this error message when opening Sys Pref / Desktop Screen Saver, "Could not load Desktop & Screen Saver preference pane." Just loaded  Yosemite on
    iMac 10.1. Any suggestions?
    Thanks

    If you see a "could not load" alert when opening a System Preferences pane

  • Could not load Desktop & Screen Saver preference pane.

    Upgraded 10.10.3.  Tried to use "desktop & ScreenSaver" system preferences and only get this message...
    Could not load Desktop & Screen Saver preference pane.
    Help!

    If you see a "could not load" alert when opening a System Preferences pane

  • Photos being displayed on screen saver are scrambled.  Why?

    After updating to Mountain Lion some of my photos being displayed on the screen saver are scrambled.  Why? This is only started happening after we upgraded to Mountain Lion. In all instances, the effected photos are those that have been 'photoshopped' and then re-saved as a .jpg. However there are many of the photoshopped photos that display perfectly. The effected photos are okay in preview, iphoto and photomechanic.

    It very well could be an extra data problem, but Preview is only allowing photos from a camera or scanner to be imported. 
    I'm essentially creating a screen saver slide show using photos from previous Christmas's.  After importing the photo into photoshop, I added a visible date so the viewers would know which year the photo was taken.  This slide show worked perfectly on our imac until we updated to Mountain Lion. 
    To create this slide show I took .jpg's imported into photoshop, added the image to a photoshop template with the text box (for the date), saved as a photoshop 'flattened' image, and then saved as a jpg.  And like I said, prior to updating my machine to Mountain Lion, these 'enhanced' photos appeared in the screen saver perfectly, and now they don't.
    The weird thing is that there are about 87 photos in this slide show and about 40 of these photos look just fine, the rest are scrambled and I can't figure out what's making the difference. The MB don't seem to matter either.

Maybe you are looking for