My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

Computer slows down and locks up after installing Xtreme Mu

I recently upgraded my Audigy 2 to the new Xtreme Music soundcard. The music sounds great!? Before install, I uninstalled all drivers from the Audigy 2. Now, my computer behaves differently. Before the login screen (Windows XP), my video flashes multiple colors for about 2 seconds. After logging into Windows, applications have slowed down (this is after installing the drivers for the sound card and updating the software to the latest from the website). For example, Email took some time to come up (outlook), and then a word attachment refused to come up. IE took considerable amount of time to launch. This is after running the computer with the sound card for a week.
The problems aren't consistent. I returned the card, and the salesman asked if I plugged in the external power (floppy dri've connector). I read the instructions, and they did not state to do this, but I will give it a try. I swapped the card for a brand new one and brought it home. This time, I plugged in the external power. Same symptoms, if not worse. It is sporadic, and sometimes worse than others.
This morning, my computer was working extremely slow opening IE or Outlook and reading email. I pulled the sound card and all is great again. Bummer!? I really like the sound this card produces. My fear is, will ANY X-Fi card do this or just the Xtreme Music?I have an ASUS P4P800 Deluxe (onboard sound has always been disabled). I didn't have any problems with the Audigy 2. 550W power supply, Gig memory, Pentium 4 2.8 GHz processor, and and ATI X600 video card. No other cards are installed in the system.

I tried it is 2 separate slots. Same symptoms. I am looking to see if it is a power issue (not enough juice from a 550w power supply), or if there is a conflict. I still have the creative drivers and software loaded without the soundcard installed and no problems (So I'm ruling out the creative sound software).

[Solved]Computer slow down and freeze during data transfer syncing

Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)

It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

No Listener service after installing Oracle 10g 2

Hi,
I have finished installing Oracle 10g 2 on a windows 2003 server. But no Listener windows service is not created. Any explanation ? Should I create the manually , How ?
Many thanks.

No, but I created one after installing Oracle , by
DBCA.
I'm going to apply RDBMS 5337014 patch to upgrade to
10.2.0.3. Should I create Listener before ?
Thank you.
Message was edited by:
user522961For applying patch actually you don't need listener, but it is best if you have a listener for client to connect, isn't it?
cheers
FZ

After install oracle 10g, enterprise manager web version, can not login

Hi Guru,
I have installed oracle 10g on windows xp pro sp2 successfully, can use sqlplus to connect to DB, but when using IE to login enterprise manager web version port 1158, it failed. The login page came out, but when I keyed in the right userid/password ie sysman/pwd1234, the login screen just refreshed, nothing happen. but if I purposely key in wrong userid or password, the message "invalid userid or password" comes out.
Another "interesting" thing is, I can login web version isqlplus successfully using the same userid/password. but can not connect to web version isqlplus/dba, even I use user sys, also can not login.
Need your urgent help to solve this problem.

Hi.
What does the log say?
From %ORACLE_HOME%\opmn\logs folder.
rgds
Kjell

Very slow boot and hanging after login.

About 2 days ago I put my Mac to sleep by closing the lid. The next day, after waking it up and logging in, I opened Firefox. Then I got the beachbubble which lasted for awhile but then firefox opened. Then I closed Firefox because the beachbubble had me worried, but after closing it I got another beachbubble. I held the power button on my macbook because the whole OS seemed locked up.
Now whenever I boot, I stay at the apple logo screen for atleast 10 minutes, then when I finally reach login, whenever I click on something I get a beachbubble for awhile. If I do login, it seems to hang at the default wallpaper screen, but I can move my mouse.
I don't remember updating or installing anything that might cause problems like this, but I'd like to do a time machine restore back a couple days, however I can't get to my desktop.
Thanks in advance.
I did try resetting the PRAM and NVRAM, twice atleast, I tried Safe Boot, I tried Verbose and Single-User mode. With my experience I couldn't do much in either, however I did type"exit" in Single-User mode, and when "DSMOS has arrived.", nothing happened.
Oh, and I can't boot with only power without the battery, because I have a non-removeable battery, atleast, only Apple is supposed to touch it.

Restart the system from the SL disc you have. If you aren't sure how to do that put it into the DVD drive and restart the computer holding down the Option key, when it comes up choose the disc in the DVD drive. If it attempts to install let it until it gets to the choose language. Once you are on that screen then click the Utilities menu and choose Disk Utility. Once DU is running then choose the internal HD and look for the S.M.A.R.T status. If it says Verified that is a good sign, if it says anything else kiss the HD goodbye. I hope you have a good back up of your system because you will need to replace the internal HD. If the machine is still covered by warranty or AppleCare then contact Apple and arrange for a repair. If the S.M.A.R.T status says the internal HD is Verified then choose Repair Disk, you may have to run this numerous times for it to be repaired.

4.0 upgrade made my computer slow down and stall. Is there a way to speed it up or do I have to uninstall it?

The upgrade to 4.0.1 slowed down everything considerably on my computer like: start up, going to another page, searching, and even logging off can take up to 10 minutes to shut down. I also have an even worse problem with the pages hanging.

Apple does not and never has supported downgrading to an earlier version of iOS.
Hope this helps

Time Machine WIFI slows down and Fine after I unplug it?

My Time Machine WIFI slows down to an absolute crawl and then after I unplug it and plug it back in, it's back to normal. Can someone help me?

My Time Machine WIFI slows down to an absolute crawl and then after I unplug it and plug it back in, it's back to normal.
This is a classic case of the effects of wireless interference from other networks around you. See the link at the bottom for more information about this.
It might first help to understand why things improve when you unplug the Time Capsule and then power it back up. When you do this, the Time Capsule will scan to find the best available wireless channels to use at the time.
Unfortunately, other wireless routers are doing the same thing all the time, so after a few hours or a day or two, the channel(s) that the Time Capsule was using become overcrowded and the wireless slows down to a crawl. Cordless phones can also create interference issues for a wireless network as well as any number of other electronic devices.
Unless you can convince other users around you to turn off their wireless routers, there is not much that you are going to be able to do to come up with a permanent fix. For now, locate the Time Capsule as far away from any outside walls in your home as possible and use the 5 GHz band for as many connections as you can.
A friend of mine who recently moved into a new apartment complex has the same problem. He has to restart his wireless router at least twice a day, sometimes more on the weekends. Too many wireless networks.....not enough channels.
Wi-Fi and Bluetooth: Potential sources of wireless interference - Apple Support

When I try to use Google Chrome with FireFox installed my computer slows down and also crashes. How can I use both together?

I have tried several times to use Firefox and Google Chrome on my computer at the same time. When I do the computer runs slow, page scrolling is erratic, and occasionally it will crash. If I uninstall Chrome the computer returns to normal. How can I fix this issue?

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

System rebooting and hanging after installing Radeon Drivers

Hello, I have a MSI VIA KM266 motherboard with onboard video. Whenever I install a video card in the AGP slot and install the latest display drivers for my Radeon 8500 (i've even tried a Geforce card with the latest drivers) the system will randomly hang, crash, bluescreen, or reboot. I have the latest bios which are version 1 (ms-6738). I'm not using any device in the PCI slots either. I've got 256 MB of DDR ram, 40 gig Maxtor HD, and 8x ACER cd burner. It's running on a clean install of WinXP Pro. I'm running out of things to try. On the other hand, if remove the video card and run the onboard video, the system runs fine. Can anyone help me??

Sorry the CPU is a AMD XP 2200+ that runs at 1.8 GHz. Not sure about the max amps though. How can I find out.
Thanks!

Computer slowed down a lot after downloading Mavericks 10.9.1

Hardware Information:
 MacBook Pro (13-inch, Late 2011)
 MacBook Pro - model: MacBookPro8,1
 1 2.4 GHz Intel Core i5 CPU: 2 cores
 4 GB RAM
Video Information:
 Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
 OS X 10.9.1 (13B42) - Uptime: 1 day 1:24:41
Disk Information:
 TOSHIBA MK5065GSXF disk0 : (500.11 GB)
 EFI (disk0s1) <not mounted>: 209.7 MB
 Macintosh HD (disk0s2) /: 499.25 GB (403.23 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
 MATSHITADVD-R UJ-8A8 disk1 : (3.73 GB)
USB Information:
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
 Apple Inc. thunderbolt_bus
Kernel Extensions:
 com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6)
Problem System Launch Daemons:
Problem System Launch Agents:
 [System] org.thebends.iphonedisk.mobile_fs_util.plist 3rd-Party support link
Launch Daemons:
 [System] com.adobe.fpsaud.plist 3rd-Party support link
 [System] com.avid.bsd.DigiShoeTool.plist 3rd-Party support link
 [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
 [invalid] com.oracle.java.Helper-Tool.plist
 [System] com.paceap.eden.licensed.plist 3rd-Party support link
 [System] PACESupport.plist 3rd-Party support link
Launch Agents:
 [invalid] com.oracle.java.Java-Updater.plist
User Launch Agents:
 [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
 [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
 [not loaded] com.google.keystone.agent.plist 3rd-Party support link
 [not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
 None
Internet Plug-ins:
 FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
 QuickTime Plugin: Version: 7.7.3
 Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
 Default Browser: Version: 537 - SDK 10.9
 SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
 Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
 DirectorShockwave: Version: 11.6.8r638 3rd-Party support link
 JavaAppletPlugin: Version: Unknown Outdated! Update
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
 AirPlay: Version: 1.9 - SDK 10.9
 AppleAVBAudio: Version: 2.0.0 - SDK 10.9
 iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
 MacFUSE 3rd-Party support link
Bad Fonts:
 None
Old Applications:
 /Library/Application Support/Microsoft/MERP2.0
 Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
 Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
 InterLok Helper: Version: 5.9.1 - SDK 10.4 3rd-Party support link
 /Library/Application Support/PACE Anti-Piracy/InterLok Helper.app
 SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
 /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
 Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
 /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
 /Applications/Microsoft Office 2011/Office
 Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 /Applications/Microsoft Office 2011
 Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
 /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
 Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
 /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
 Microsoft Communicator: Version: 13.1.3 - SDK 10.5 3rd-Party support link
Time Machine:
 Time Machine not configured!
Top Processes by CPU:
 3% WindowServer
 2% EtreCheck
 1% ocspd
 0% securityd
 0% configd
Top Processes by Memory:
 131 MB Google Chrome
 119 MB Finder
 57 MB WindowServer
 53 MB mds_stores
 48 MB Google Chrome Helper
Virtual Memory Information:
 1.24 GB Free RAM
 1.17 GB Active RAM
 120 MB Inactive RAM
 1.06 GB Wired RAM
 24.34 GB Page-ins
 591 MB Page-outs

I'd uninstall:
com.paceap.kext.pacesupport.snowleopard (note: Snow Leopard. Frequent flyer on the misbehaves with Mavericks list.)
org.thebends.iphonedisk.mobile_fs_util.plist
[invalid] com.oracle.java.Helper-Tool.plist
com.paceap.eden.licensed.plist
PACESupport.plist
[invalid] com.oracle.java.Java-Updater.plist
 [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
 [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
 [not loaded] com.google.keystone.agent.plist 3rd-Party support link
 [not loaded] com.spotify.webhelper.plist 3rd-Party support link
MacFUSE (note: developer stopped supporting this back in Lion).
Chrome is another frequent flyer in the misbehaving macs with Mavericks posts.

Can't login after installing Oracle 10g on XP Service Pack 1

Hi, I am completely new to using oracle and cannot login after completing the install process. I followed the article:
http://www.suite101.com/article.cfm/oracle/115320/3
in order to install and unlock the relevant accounts (such as "SCOTT"). But I keep getting the following error message when attempting to login (at both the "http://myservername/em" and "http://myservername/isqlplus" urls):
ORA-01017: invalid username/password; logon denied
After a few of those errors I also get an understandable "account locked" error message.
Can anyone suggest fields for "username", "password" and "contact identifier" that might enable me to login?! And why can't I use the "Global Database Name" and password that I supplied during the installation process?
oh, and does it make a difference that I'm using "Parallels Desktop" to run windows from my mac?
Thanks very much for any help, because I really need to get this running quickly!

Open SQL*Plus ... all learning of Oracle should start at the SQL*Plus command line.
Assuming you are logged in to the operating system as the same user that installed the Oracle software on SQL*Plus in the Start -> Programs menu.
Under username type "/ as sysdba" without the double-quotes and leave the other two dialog box fields empty.
Now enter:
SQL> alter user scott account unlock identified by tiger;
SQL conn scott/tigerIf this works you need to proceed by getting a beginning Oracle book. The one's offered by Oracle Press are among the best for your level or preferably find a class personal mentor in your area.
Bookmark:
http://asktom.oracle.com
http://tahiti.oracle.com
http://www.psoug.org/library.html
But XP SP1? Why? SP2 is the minimum for a system with some level of security.
In the future always post a complete version number (3 decimal places) as well as, as you did, complete error messages. That will help you get good answers.

Flash html5 - How can i make an internal movie clip slow down and stop when it get to a certain frame?

I am creating an automotive braking system using flash and have a wheel turning. I want the wheel to slow down and stop after the brake pedal is pushed at a certain frame. I know I could do this with frame by frame animation but was hoping there was a short cut - javascript?? If not the slowing down portion then is there code for just making the internal movie clip (wheel turning) to stop when it gets to a frame.? Thanks

you can use the ticker class to create a loop that you use to control the wheel's rotation or frame, TweenJS v0.6.0 API Documentation : Ticker

My computer slows down and hangs after installing oracle 10g

Similar Messages

Maybe you are looking for