My computer starts turning on with a black screen and the sleep light flashes, then the old screen from when my battery died shows up behind like a blue screen, then it dies again and wont restart? And yes my computer is fully charged now, HELP!

So the problem now is in the question, but just before this problem the initial issue was my computer would start and turn on but the backlight appeared to be on its dimmest setting I could barely make out icons and the last page I viewed. Please help I'm in college and did not back up everything plus I desparately need my microsoft office for these classes! Thank you!!!

Hi kmdmsu08,
If your computer's not turning completely on, I would try the steps in this article, especially step 4:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Take care!
- Ari

Similar Messages

My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem?

My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem

Hi I've been following this thread (along with a different one on the same topic). I've been having the same problem with my ibook. I can add that I have no problem with startup. It's just that the screen "goes to sleep" unexpectedly and may operate normally for a few minutes or a few hours at most. Opening and closing the lid or restarting seems to cause it to awaken but then usually for just a few seconds or minutes. If it is connected to another video display that display continues functioning fine even though the computer screen is blank. In addition the desktop is there and visible faintly or if totally blank can be backlit through the apple logo and can be read. I've had my logic board replaced twice under the extended warranty and assumed it was that but now I'm thinking of the reed switch. Apple refuses to consider any further work under warranty as the last repair was in Jan, 06 and they claim only a 90 parts warranty and the machine is from 03. Any thoughts before I cut the wires? I have reset the pmu, run cocktail and disk utility. Other than the sleep issue the machine works fine. thanks Ronda or anyone else who has any ideas... Dave

HT4623 i started the ios6.0.1 update on my iphone 4 when my battery died.

i had a notification saying about the new IOS6.0.1 update so one day i decided to do so. about half way through the update my phone ran out of battery. From that point onwards it wont turn on. It freezes at the opening screen (apple symbol) and wont proceed. I have held the top and bottom button and it just does the same. If anyone can help me i would be greatful. Also i cant access it through the computer as it wont turn on enough to be recognised. Cheers peeps.

kemal186 wrote:
i had a notification saying about the new IOS6.0.1 update so one day i decided to do so. about half way through the update my phone ran out of battery.
Why would anyone attempt an OS upgrade on a device without ensuring that was either sufficient battery life or that it was plugged into external power?
This is simply not smart.

My macbook isn't powering up and makes a beeping noise in time with the sleep light

Hi There I hope someone can help!!!
I had disconnected the power cable and left the MacBook in sleep mode with the lid shut. When I now go to open my MacBook up, and wait for my system to resume from where I left off the screen doesn't on and the sleep light goes off. when I close the lid the sleep light goes back on as if it is in sleep mode but the same happens when I open it again, no power to the screen.
I order to try get my MacBook working again I tried holding down the power button and switching it back on again but the MacBook now looks as if it is going to power up but the sleep light comes on for about 3 secs and then beeps, then every 4-5 secs constantly the MacBook beeps once in time with the sleep light (to note the sleep light is not following its usual fade on fade off rhythm).
I have tried resetting the SMC using the shift command control option and power button (also this is the only way to stop the beeping and flashing) and when you try and switch on the MacBook if you just press the power button it just follows the same beep with sleep light routine, but if you hold the power button in then the sleep light then flashes quickly about 4-6 times and then starts to beep in time with the flash again.
I will also add I have not reconfigured anything or added any RAM to my MacBook it is still on the standard (manufacturing) configuration as I have been looking about for anyone with similar issues and the main question back seems to be have you changed the RAM, I have also tried resetting teh RAM and the proble still persists.
If someone can help it would be awesome!

Here's the Apple support article on beeps https://support.apple.com/kb/HT1547

TS1365 I have a mac pro that when i turn it on the sleep light blinks and makes a beeping sound but my screen is black. Any idea's as to why this is happening and how do i fix it?

I have a mac pro that when i turn it on i get a black screen and the "sleep light" is on but i also get a beeping sound. How do i fix this? I have powered off turned it back on and tried the command, option, P, and R and still nothing

Welcome to the Apple Support Communities
How many beeps do you hear?

When i try to wake my macbook after sleep the keypad lights up but the screen stays black. I have to switch off and restart. How do I fix this?

After my Macbook goes into sleep mode it sometimes won't wake. The keypad lights up but the screen stays black. This problem has only occured after updating to OSX 10.7.2.
All I can do is switch off and restart. Then any programs I have not 'quit' all open.

OK, I have a fix.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps.

My Time Capsule backups disappeared (blank black screens) and in trying to set it up again I now find that when TC is plugged in and on (green light) it cancels out wifi reception from my router. I am only using TC as a backup not for wifi. Help!

My Time Capsule backups disappeared (blank black screens) and in trying to set it up again I now find that when TC is plugged in and on (green light) it cancels out wifi reception from my router. I am only using TC as a backup not for wifi. Can anybody help?

Sorry, you have lost me since it appears that you have two completely separate issues here.
All that I can suggest is you start over and try to set up the Time Capsule again first...and then, once that is done and the Time Capsule is working correctly on the network....then, try to troubleshoot the separate Time Machine issue.
If you decide that you want to do this, we'll need some basic information:
Make and model number of your modem?
You are using OS X Mavericks (10.9.3), correct?

TS1365 My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lig

My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lights up. Anyone else have this problem? Any ideas?
I'd love to repair it but not if it'll cost 500 bucks or more to replace the logicboard.
I appreciate any help
Michael

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

My BB won't turn on the red light flashes and the key's light up

Hi
I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer. The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on. I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy. I have only had this phone since July last year. I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
Louise

Hi,
The way you presented it made me think it had just happened.
So you have had the phone since July has it ever worked?
Most likely you are missing some or all of your device OS and you'll need to reload the device.
Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
Thanks,
Bifocals
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I am having difficult problems with the FocusritePro14 it works for a few then the firewire light flashes it cuts in an out then my MacBookPro crashes and restarts what can be the problem?

I am trying to figure out why this interface never works like it should, I have the lastest drivers 10.8 OS, The firewire cuts in an out and then crahses my computer, it was working fine for a good month, and then it does this. The people at Focusrite are clueless to what is going on. This is horrible engenerring on there part. There are three lights on the interface they all light up, then half way through a recording or just lisiting to music, the FW light flashes and cuts out, and now the mac is rebooting when it does that. I highly doubt it is a simple fix, or a bad wire. I have the original cable for the interface that came with it, hooked up to a sonet adapter to fit in the macbook pro because the geniuses at apple decided that they would make that port small.
Sorry about mispeling its 3 am here in Ohio. Please can someone help
Thank you

Hello Bagpus113
Check out the article below to troubleshooting issues with the sound for music and for videos. One other thing you can try is to convert the songs to a different format
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
Regards,
-Norm G.

My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

That normally indicates an issue with system memory. The startup sequence can't complete the boot due to a memory issue. Take it in for service.

TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

Hello:
Try resetting the SMC:
http://support.apple.com/kb/HT3964
Barry

G10-133 started booting up with a black screen

Hi,
I was wondering if anyone could shed some light on a problem I'm having.
About 3 months ago my G10 started booting up with a black screen. I can hear the qosmio logo sound and everything. Just couldnt see anything. So I pushed FN + F5 and this would show the windows xp loading screen. But when it booted into windows. It would be displaying at a very low resolution. So i would have to change it or push the tv out button twice and it would auto reset itself.
I've been into the bios and changed the Display start up to lcd+rgb analog and that will show everything during the booting process but still goes into windows at a low resolution.
And if i plug in an external monitor, they both just go blank.
I've tried full re-intalls, qosmio player re-install. Nvidia driver, hotkey utility, display change. But still nowt.
Anyone had similiar problems? And if so were you able to fix it?

Yup, I had this a while back on my G10 and it was the start of more serious problems. The machine started behaving more oddly, and it got worse over time to the extent that it would lock up when watching DVDs and the qosmioplayer software stopped working completely.
I don't know if you've got the same problem, but I got on to the Toshiba techies and the machine ended up going back to them for a complete system board refit. = problem solved.
Oddly enough, a friend of mine had exactly the same problem and went through the same process of returning the machine; i don't know if this is a problem affecting all G10s!

HP Laptop. Blank screen and caps and num lock lights flashing.

Hi,
I hope you can help me.
My laptop is the HP Pavilion DV6-1216sa, bought new in September 2009. When I turn it on, I get a blank screen, the fan is working and the wifi, volume and mute lights light up. The caps lock and num lock lights flash together, once everyone 3 or 4 seconds. Normally when this happens (it has happened throughout the life of the laptop), I turn it off and turn it back on, and it works again. However this time, the problem persists. I've tried most combinations to get the bios screen up and I've tried getting it to another screen via hdmi and VGA, but no signal received. I have tried everything recommended by the HP support website. I have checked the battery, ram, and hard drive.
Best regards,
Jay

The best cheapest fix is if you can remove the motherboard your self and send it to a refabricator who will check all the chips on the motherboard and reball the bad ones. Cost is about $60-120, closer to the bottom if you can ship them just the board but if necessary they will take the whole laptop and remove the board for you.
eBay auction for repair motherboard only
disassembly included auction
If this is "the Answer" please click "Accept as Solution" to help others find it.

I have an ipod, it will not turn on unless it is connected to my computer. The battery is fully charged. HELP!

I have an ipod, it won
t turn on unless connected to my computer. It is fully charged. HELP!

If the iPod only works when connected to an external power source, that's a pretty good indication that the battery is shot and in need of replacement. You can choose to have Apple do the job for a flat fee, or you can send it to a third party repair service who might be a bit cheaper.
Here is Apple's repair pricing: http://www.apple.com/support/ipod/service/prices/
Overall, in my opinion, it might just be more worth it to invest in a newer one when it comes to the iPod Shuffle and dead batteries.
B-rock

My computer starts turning on with a black screen and the sleep light flashes, then the old screen from when my battery died shows up behind like a blue screen, then it dies again and wont restart? And yes my computer is fully charged now, HELP!

Similar Messages

Maybe you are looking for