My computer states HP officejet 7410 all in one no device found

went to hp driver, did a find hp, on hp website, did the download for product, HP solution center on desk when I click it pop up says No Hp devices have been detected HP solution center will close now ok In control panel under scanner and printer folder it has 1 icon HP officejet 7400 series with a green check and Ready next to it. Not only am I trying to get computer to work with solution center am trying to make wireless Can anyone help?

Hello there! Welcome to the forums @CFHPhilly ,
I read about the issues you're having with installing your Officejet 7410. Could you check the instructions in the guide below to ensure you have set up the printer the way the guide recommends? If not, please try out those steps and if you run into any issues, let me know what they are exactly and also which operating system you are running on your computer.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
+Hello Charles,+
+Thank you for contacting HP Total Care.+
+I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
+I appreciate for the opportunity to assist you.+
+*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
+I will be more than happy to assist you when you change the OS.+
+For information on keeping your HP and Compaq products up and running, please visit our Web site+
at:
+http://www.hp.com/go/totalcare+
Sincerely,
Sentinaro
+HP Total Care+
+Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
+For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
+HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

Help! I've spent hours researching this and can't find a solution...
I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
Very Respectfully,
Bobby G.

HP Officejet 7410 All-in-One no longer 'automatically' print double sided

After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically. When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides. If I choose the latter I have to manually reload the paper when prompted. I have tried searching for updates and downloading drivers but nothing has resolved the problem. I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper. It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time. I have spoken to HP and they say my printer is old and they cannot help me. It is about 8-10 years old. Any advice would be gratefully received.

Hello Toosweet
In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

Hi
Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
Thanks
Bye
balubeto

Hi @balubeto
I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
Software and Driver Removal Utility
Uninstalling the Printer Software (more basic uninstall)
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet 7410 All-in-One photo printing thin white lines

I haven't had this problem before.
First, I had 2 thin white lines near the left edge of the paper -- 1st, 1 1/4 inches from left edge; 2d, 2 1/2 inches from left edge. I cleaned the cartridges automatically.
Then, I had only one thin white line, 1 1/4 inches from left edge. I am loathe to try the automatic cleaning again because I'm using a LOT of color ink on this photo.
I need to know whether it will help to: 1) clean automatically again,
2) clean the cartridges by hand with filtered water, or
3) is there some other solution? (What is it?)
kaylaesq

Are the lines across the short length of the paper or the long length? ("Left" side means different things if you are printing in portrait or landscape.)
If the lines are along the long axis of the paper it may be caused by aerosol fogging of the encoder strip. In this case you could clean the encoder strip as described in this post. Do not clean the encoder if the lines run across the page in the short direction (the way the printhead moves). If you do need to clean the encoder heed the warnings, the encoder is fragile and can be damaged by rough handling or aggressive cleaning.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am not able to scan on my Officejet 7410 All-in-one

I run the HP Print and Scan Doctor finding and fixing scan problems and it keeps getting hung up at the point where is says that there is a registry problem found with device registration and it says I should unistall and reinstall the software from the Full Feature Software from Customer Care (recommended) which I have done 4 times and it still will not scan

Hi,
Thanks for reporting the issue. There are few ways you can do scanning from the Printer
1. Make sure you downloaded latest HP software and installed it.
2. From PC, launch HP printer application (Start->Program files-HP->printer model->Hp Model series) or the solution center and double click scan link to do scanning
OR
3. Any third party applications like Paint program, click file and choose insert the image from scanner.
4. If it is connected via network, then you can use your browser to make scan, Here is the video
http://www.youtube.com/watch?feature=player_embedded&v=HbWpgww5I-M
If any of above option doesn't work, then download the print and scan doctor application and run it.
Here is the location: http://ftp.hp.com/pub/softlib/software12/COL44841/mp-120776-1/HPPSdr.exe
Happy Printing
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Officejet 7410 All-in-One won't start

Have used the printer successfully for four years.
Recently:
1) 'On' button stopped operating. Need to plug/unplug the power cord to turn the printer on/off.
2) When power is applied to the printer it appears to be in a perpetual boot. It does the following:
a) The Color Graphics Display displays the HP Invent logo and an animated grey-scale bar for about 1 minute.
b) Then the Color Graphics Display greys out for a few seconds.
c) Repeats steps a and b until power is removed.
Any suggestions on how to resolve this problem?

Vikings_Fan wrote:
Have used the printer successfully for four years.
Recently:
1) 'On' button stopped operating. Need to plug/unplug the power cord to turn the printer on/off.
2) When power is applied to the printer it appears to be in a perpetual boot. It does the following:
a) The Color Graphics Display displays the HP Invent logo and an animated grey-scale bar for about 1 minute.
b) Then the Color Graphics Display greys out for a few seconds.
c) Repeats steps a and b until power is removed.
Any suggestions on how to resolve this problem?
If you can live without the wireless network the following may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

No Drivers for officejet 7410 all-in-one?

I am having wireless AND driver issues with my previously working perfectly printer. To bypass the wireless issue I thought I'd just connect with USB to at least get printing capability while I resolve wireless issue. I had deleted the printer profile when I started having connectivity issues thinking if I started fresh it would be able to connect. Except now, when I plug in my printer via USB and click on the printer when it shows up in the options, it says NO software update for this machine. Is it even possible that HP has pulled the drivers? It's not that old of a machine. How do I find the drivers if the sofware update method does not work. I'm on a mac OS 10.8.

The drivers can be downloaded at the HP site from the link below.
Drivers

Officejet 7410 All in One Keeps Rebooting

" HP Invent" is on printer screen. Screen on printer progress bar is moving for about 10 seconds, goes dark, then starts again. Tried unplugging - no help. Please help! Thanks

Usually a recommendation of unplugging the power. Then removing the ink cartridges. Connecting the power again. turn it on, then reinstall the ink cartridges. Then if the message/logo goes away you will be okay. If not, then contacting tech support at 1-800-474-6836 would be in order.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion

hi,
check this link for Mac 10.7 installation guide.
l0ri3
~Though I work with HP my posts and replies are my own and not from HP.~

Error Message flashing on Screen of 7410 All in One

The screen on my officejet 7410 all in one printer fax is flashing the word error (Ox84714145e1) and the auto answer light is alternatingly flashing. We have done the obvious by unplugging everything and trying to reboot but it is frozen. Cannot turn it off with the power button.

Hello there! Welcome to the forums I read your post about the "0x" error code you're seeing on your Officejet 7410. Please check out the link below for the error that might help you! 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Message Displays on the Printer Control Panel If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Happy Holidays,

Why is my computer telling me to turn ON my HP officejet 8500 all in one? It's ON!

My HP officejet 8500 all in one printer is powered on. The fax and copier are working but when I try to print my computer (windows 7 pro 32bit) tells me to power on my printer. I had trouble with my DSL internet server yesterday and installed a new modem w/ router from at&t and my printer runs through a netgear prosafe port switch. I had to reboot everything to get the internet up on my PC. the printer worked fine before the internet and hardware trouble. I have tried wiring it directly to the PC with the USB cable and it gives the same error. I have rebooedt, unplugged computer and printer over and over.

Turn the printer off. Hold # and 6 keys while and a bit after turning it back on. This will reset the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Computer was updated to windows 7. my hp officejet j4580 all in one will no longer copy or fax.

computer was updated to windows 7. my hp officejet j4580 all in one will no longer copy or fax. Never figured out how to scan. Will print from computer. Warranty expired. Anyone have same issues? Know how to fix? Deleted and reinstalled copier still didn't help. THANKS

you need these:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77751-1&cc=us&dlc=en&lc=en&...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

New computer with windows 8. hp officejet 5610 all-in-one scanner worked but is now offline.

I have a new dell computer with windows 8. the hp officejet 5610 all-in-one seemed to be fine, and I could scan and print. Now I can no longer scan. charms - settings - change Pc Settings - devices shows HP Office Jet 5600 offline!
There may have been a request to update some software which I may have allowed. Maybe this is my problem? How do I fix this?
thank you
This question was solved.
View Solution.

Hi,
Please download Full Feature Softeware and Drivers from the following link and install on your Dell:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=au&dlc=en&sw_lang=&product=4411...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Computer is unable to communicate with printer Officejet J4680c All in One using wireless setting.

I received a message while I reinstalling software and driver to change from usb conection to wireless conection: Your laptop is unable to communicate with your printer (Officejet J4680c All in One. This may be caused by firewall software. If you are using firewall software, verify that UDP port is unblocked for both inbound and outbound trafic. But I don't know how to verify that option in my computer. While I reinstalled software I turn off firewall software in my computer. Can some one help me to resolve this issue? Thanks.
Ref: My laptop is Toshiba Satellite P755 with Windows 7 (64bit)

Hi,
Download and run HP Printer Install Wizard from link below
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

My computer states HP officejet 7410 all in one no device found

Similar Messages

Maybe you are looking for