My computer the volume to quiet and my headphones is too loud

i cannot listen to my music on here cause it is too quiet and i cant make it louder and when i put my headphones on to listen that way it blows my ears cause it is too loud so i want to switch them with the loudness on my main volume on my computer and make it more quiet on my headphones please someone help me im ready to throw this computer out the window lol please help me thank you

Try a reset of iiPhone hold & home sleep buttons until the Apple logo appears then release
No data will be compromised

Similar Messages

HOW do I change the VOLUME of "You've Got Mail?" too loud!!!!!

'''''# * '''bold text''''''''

Hi Looking4YourHelp,
You change the volume by pulling up Control Center and moving the slider bar for volume that is right under the player controls. Take a look at the link below for more information.
Use Control Center on your iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT202769
Take it easy,
-Norm G.

WHAT THE HECK! eversince I updated my itunes... My laptop keeps on crashing, i try to change the volume on itunes and it doesnt even move, and I quit Itunes but apparently it won't ever quit... I lost all my paper work cuz it crashed 4 times this week.

WHAT THE HECK! eversince I updated my itunes... My laptop keeps on crashing, i try to change the volume on itunes and it doesnt even move, and I quit Itunes but apparently it won't ever quit... I lost all my paper work cuz it crashed 4 times this week.

Try disabling the computer's antivirus and firewall for the network problem.
Also for the original problem try the following if Ana's suggestions does not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

I'm trying to install a new samsung 27" series 7 750 monitor. I have a macmini. when i plug the cord in between the computer and the mknitor, the screen goes white, but no display. When not plugged into the computer the screen stays black and cycles

I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?

Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I want to install on my other computer the "creative suite 6" and I can't find the serial number. For some reason, there is no sticker on the cover of the disc. I think I bought it at 2012. What should Ido?

I want to install on my other computer the "creative suite 6" and I can't find the serial number.
For some reason, there is no sticker on the cover of the disc.
I think I bought it at 2012.
What should Ido?
Hagar

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

When I try to access itunes store on my computer, the screen pops up and then goes blank...anyone know why? I don't have any pop up blockers on

When I try to access itunes store on my computer, the screen pops up and then goes blank. I don't have any pop up blockers on. Anyone?
thanks

Hi Jennifer, I'm having the exact same problem. I have tried uninstall. reinstall. Change accounts. Nothing works. My songs are still there but when I click on itunes store the screen is blank. ??? Come on windows people how do we fix?

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck!

No audio coming from my iMac...one moment it worked then nothing from no app and yes the volume is up and no, there are no headphones

No audio coming from my iMac...one moment it worked then nothing from no app and yes the volume is up and no, there are no headphones

Greetings sailpeachie,
After reviewing your post, I have located an article that can help with audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Troubleshooting issues with no audio from built-in speakers on Macs - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
BobbyD

My computer the volume to quiet and my headphones is too loud

Similar Messages

Maybe you are looking for