My computer went to sleep and never woke up!

twin g4 867 MDD went to sleep at its scheduled time (2AM) The next day it would not wake from sleep as far as i could tell. Unplugged it, plugged it back in and i get startup tones but no video feed. HD's and fans are spinning. anyone have any ideas? Monitor burnout? graphics card? (i have a a nvidia gforce ti) im running tiger with all the updates, and an apple 20in cinema display. THANKS!!!
G4 MDD Twin G4 867   Mac OS X (10.4.6)   1.25Gig Ram, G-force Ti graphics card, 210Gig HD space

Hi,
If everything is spinning, it sounds like the graphic card is not working correctly. That particular video card has been known to do that. If you are familiar with your MDD, try taking the card out and re-seating it, then restart. Unplug the computer first.
Go here to see instructions in removing the video card in a MDD Mac:
http://docs.info.apple.com/article.html?artnum=26259
If that doesn't work, you'll have to locate a new/used video card that supports your ADC connector on your monitor and try that. Finding a loaner from a friend would be ideal.
Tell us what happens,
Regards,
Dave

Similar Messages

  • It Went To Sleep And Never Woke Up

    For Christmas, my parents bought me a 4GB Silver iPod Nano. I've used it quite a bit since then, I believe right now it's holding 85 songs. Anyways, last night before sleeping, I was listening to it. I was done with it, I set it to sleep, put it into the charger, and went to sleep.
    I wake up this morning, the power has blinked on and off a few times. I pick up my iPod, try to turn in on and...nothing happens. My first thought is that the battery is dead, so I re connect it and wait for my computer to detect it...it doesn't. I open up iTunes to see if it shows my iPod (named Donnie's iPod) as a device, it doesn't.
    So basically right now I have a rectangular silver device that is supposed to play music that is just sitting here taking up space. Now, if it is important, my computer specs:
    Dell Dimension 4600
    Intel Pentium 4 Processor
    Roughly 4 Years Hold
    Relatively New Hard Drive, Replaced in July of 2006
    Windows XP Home Edition
    The only ports I have availible for use are two which are in the front and I have tried them both, neither appear to do anything.
    So is there anything I can do besides replacing it?

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.
    iPod touch-wheel is unresponsive after waking from sleep.
    When restoring the iPod, it's recommended to put it into disk mode first.
    Putting iPod into disk mode.
    If none of the above help, it may need service, or you could go to an Apple store and have them check it out.
    You can arrange online service here.
    Service request.

  • T60 went to bed and never woke up

    Firstly, I apologize for posting this. I'm sure it's been answered, but I couldn't find exact symptoms searching here.
    Machine in question, T60 type 2637-D06
    Shut it down last night, as normal. Left plugged in as I usually do.
    Woke this morning, the charge and battery lights both on, as usual.
    But nothing happens when I push the switch. No other lights, no beeps, nothing. As if the switch is bad (which I understand is a possibility)
    If I pull the battery, I still get the A/C light. Same results though. No beeps, no other lights.
    If I pull the A/C and install the battery (which has always been fine for 2-3 hours, so I'm ruling out the A/C power supply), no lights at all. And similarly unresponsive.
    Tried the button pressing 'trick' thing. No joy.
    So of course, apart it came. Pulled system battery and let sit for an hour or so. Back in, no difference.
    Pulled memory and tried it. No difference (still no beeps)
    My only thoughts as to what could be bad now are:
    Bad power switch (is there a way to 'break' it to test it?)
    Screen open sensor (could this cause such symptoms, and is there a way to access it and test it?)
    bad mother board (in which case, I'll just get another used computer and swap hard drives)
    Any thoughts greatly appreciated. I have an old Gateway that behaves similarly, so if I could get this working, maybe I could get it working too (long shot).
    And, if I do end up just buying another T60, it could be helpful if I have a clue of what bits might still be usable in my broken one as parts for a new one when it breaks down the road...
    Thanks
    Matt

    Welcome to the forum!
    If you can borrow another keyboard to test the machine with (any Lenovo-era ThinkPad keyboard should do) that would be a good start.
    If a dead board is the culprit, all other parts *should* be fine...that's a pretty sweet machine, FlexView LCD and all...throw in another board (any non-wide T60/p board will work and they're quite inexpensive nowadays) and call it a day...
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Had an iPhone 4 updating the OS when it was interrupted by the computer going to sleep and now is frozen on "plug into iTunes" screen.  Home/Power button combo will not reset, iTunes does not acknowledge the phone is plugged in.

    I recently upgraded to the 5s, so I delegated my old iPhone 4 to a music player/daughter checking instagram and email.  Three days ago I plugged the iPhone 4 into iTunes to update it, the OS began updating.  During the update my computer went into sleep mode, interrupting the OS update.  Now the phone will not do anything but show the screen with the graphic indicating to plug the phone into iTunes.  I've tried a hard reset (holding down power button/home button), plugging the phone into iTunes before/during holding down the home button, holding down the buttons for various lengths of time in various permutations according to info I've found online, etc, and nothing happens beyond a brief showing of the Apple logo and then back to the same screen.  iTunes will make a connection noise when the phone is plugged in but otherwise makes no indication that a device is plugged in (no iPhone button in the tool bar, etc.).  Any ideas or do I need to take it to an actual Apple store and hope they don't tell me it is completely bricked?

    Yep, done all that.  Repeatly.  Don't get any sort of recovery mode message or the phone showing up on iTunes at all.  iTunes is most current version, all diagnostics show everything fine, and it works fine with my current phone.  Just....nothing.

  • I changed the keyboard language from English to Vietnamese, then the computer went into sleep. I turn it on, it asks for the password, but the keyboard doesn't take vowels. what can I do?

    I changed the keyboard language from English to Vietnamese, then the computer went into sleep. I turn it on, it asks for the password, but the keyboard doesn't take vowels. what can I do?

    You may want to wait for others to see this thread who might offer some other suggestions, but you could consider resetting the password. These instructions work for Lion (10.7.x) and Mountain Lion (10.8.x).
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • Hi, I turned my macbook pro off before I went to sleep, and this morning when I awaken. I can't seem to use the volume at all! I went to system preferences sound output BUT everything is light grey and it some-how looks like I don't have permission.

    Hi, I turned my MacBook Pro off before I went to sleep, and this morning when I awaken. I can't seem to turn up or down my volume. It comes up with all the volume bars and a little circle sign with a diagonal line in the middle, like a stop sign. I have gone to system preferences > Volume > Output BUT all my volume preferences have gone all light grey and wont let me access them.
    Anyone help?

    Hi EmalooneyToons,
    Welcome to Apple Support Communities!
    Take a look at the article linked below, it provides some suggestions for troubleshooting audio issues on Macs and when to setup service for your device, if needed.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    -Jason

  • My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do?

    My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do? I will not let me enter my password to get in and trouble shoot the keyboard. Please Help!!

    I pushed in the button on the top right corner. It turns a green light on and then it goes off. I held it in until it started blinking. It blinks for a bit and then the green light turns off. I am still not able to type my password. What should I do now?

  • I am at attorney in Floride and am the proud owner of adobe acrobat 7 standard (necesssary in Florida to file legal papers with the courts).  My computer went belly up and I am attempting to restore it to its prior state.  I cannot get it to activate my p

    I am at attorney in Floride and am the proud owner of adobe acrobat 7 standard (necessary in Florida to file legal papers with the courts).  My computer went belly up and I am attempting to restore it to its prior state.  I cannot get it to activate my product.  I realize you have quit supporting acrobat 7, however, I need it.  How do I get it activated.  I have tried by web and phone (which says you have quit the phone activation).  how do I get it activated.  I have downloaded the CS2 product from creative cloud to no avail.  What do I do?  Ida Roberts

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Mylenium

  • MacBook Pro went for sleep and not waking up

    mAC bOOK pRO WENT TO SLEEP AND NOT WAKING UP

    Contact Apple.
    You can try   Reset SMC
    http://support.apple.com/kb/HT3964

  • HT2518 During transfer windows machine went to sleep and now it ail not continue? Help how do I get it to start loading again? Transfer screen is stoppped at 7 minutes to go?

    During migration / transfer from windows LT went to sleep and now it will not continue?
    Help how do I get it to start loading again?
    Transfer screen is stoppped at 7 minutes to go?

    The large text size makes your post almost impossible to read.
    Excessive use of bold or capitals (also) makes posts difficult to read.
    You can drag most of the column headings left or right, or right-click on the header to turn columns on or off.
    Once you've used File > Display Duplicates or Shift > File > Display Exact Duplicates you can use File > Display All or the Display All button at the bottom of the list to restore the display.
    For general advice on organising your library see this article on Grouping tracks into albums.
    tt2

  • Internet goes stale after computer goes to sleep and then needs to be rebooted to function properly

    I mac with retina 5k display
    internet goes stale after computer goes to sleep and then needs to be rebooted to get it working again
    10.10.1 os

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Computer went to sleep won't wake up

    Ok I have a Hewlett Packer Model 1005052, yesterday it went to sleep and when I returned to start using it there was no light showing next to on/off button, no light on keyboard/mouse. Have unpluged and repluggeed in etc and still nothing. you can hear somethign running but nothing is coming on.The plug in the back of monitor has a light on but that is it. Can you suggest what might be wrong? Thank you

    Hi
       Is this a Desktop or a Laptop that you are having problems with ???? 
                           Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • HT3231 Would it fatally interrupt my migration if I didn't set those settings and my computer went to sleep during the process?

    help.

    Why would you not want to set them and then find out? If Apple advises not to let the computer go to sleep when it is inactive during Migration, it probably will and mess things up. So just temporarily set it to never sleep and set it back to your usual setting when the migration is done.

  • Computer goes to sleep and doesn't wake up

    Hi, I have an external hard drive (Western My Book), every time that the computer goes to sleep or I do it myself the computer doesn't wake up, I have to restart, I already used disk warrior, any suggestions? Thank you.

    never mind, I changed the connection to a different usb port and problem solved. Thanks anyway.

  • My MacPro goes to sleep and never wakes up

    Pretty much every time I leave my computer alone for the night, I have to do a hard reset in order to get back in... it never wakes back up when I press keys or click the mouse.  While I'm using it, it runs amazingly well.
    This is a 2006 Mac Pro, in which I have stuffed a lot of solid componentry.  Recently I made two changes:
    1.  I plugged a third monitor into one of my two video cards.
    2.  I threw in 16gb of RAM that I grabbed from Ebay.
    TechTools pro runs tests and tells me that everything is fine... obviously it's wrong. 
    I bought the computer off of craigslist, and it boots to a black screen with a bunch of white text... I don't know why.  I can't boot into Apple Hardware Test... I really can't boot into any of the recovery modes actually.  I'm stuck going directly into the operating system after the black screen does it's thing. 
    I would try to reset the PRAM and such, but holding things down during startup just doesn't work for me. 
    Here's the error report... it also includes a lot of the information about the hardware in the computer (thanks in advance for all of your help):
    Interval Since Last Panic Report:  4932030 sec
    Panics Since Last Report:          5
    Anonymous UUID:                    8A8EC18A-6F61-45EC-8FFC-86A830859C01
    Tue Dec 10 13:28:16 2013
    Machine-check capabilities (cpu 7) 0x0000000000000806:
    family: 6 model: 15 stepping: 11 microcode: 0
    Intel(R) Xeon(R) CPU           X5365  @ 3.00GHz
    6 error-reporting banks
    threshold-based error status present
    Machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
    IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
    IA32_MC5_STATUS(0x415): 0xb200000080200e0f valid
      MCA error code:            0x0e0f
      Model specific error code: 0x8020
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
    panic(cpu 7 caller 0x2cf3cc): "Machine Check at 0x01d83f68, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x80010033, CR2: 0x8711a000, CR3: 0x00100000, CR4: 0x00000660\n" "EAX: 0x00000000, EBX: 0x14d31800, ECX: 0x00000001, EDX: 0x00000000\n" "ESP: 0x833f3c10, EBP: 0x833f3c48, ESI: 0x00000000, EDI: 0x00000108\n" "EFL: 0x00000046, EIP: 0x01d83f68\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
    Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
    0x83502f38 : 0x2203de (0x6b08cc 0x83502f58 0x229fb0 0x0)
    0x83502f68 : 0x2cf3cc (0x6bde94 0x6bdfc8 0x1d83f68 0x12)
    0x835030d8 : 0x2cf409 (0x83503110 0xde 0x6bdfc8 0x1)
    0x835030f8 : 0x2e6182 (0x83503110 0x0 0x0 0x0)
    0x833f3c48 : 0x1d7b9df (0x834fc100 0x1 0x14d31800 0x0)
    0x833f3ce8 : 0x1d7dc73 (0xffffffff 0x7fffffff 0x0 0x0)
    0x833f3d78 : 0x2d0cde (0xffffffff 0x7fffffff 0x833f3d98 0x2cd4ca)
    0x833f3d98 : 0x22d3e5 (0x8352a000 0x858b1232 0x4988 0x8352ade0)
    0x833f3dd8 : 0x22e1c0 (0x189603f8 0x8352a000 0x0 0x0)
    0x833f3e28 : 0x22f6c2 (0x18960414 0x2 0x12 0x18a76300)
    0x833f3e88 : 0x22f821 (0x2150f0 0x0 0x0 0x189603f8)
    0x833f3ea8 : 0x21505d (0x2150f0 0x7000006 0xc00 0xffffffff)
    0x833f3ed8 : 0x21b385 (0x1860e240 0x7000006 0xc00 0xffffffff)
    0x833f3f28 : 0x2b7e16 (0x833f3f50 0x0 0x833f3f9c 0x1c)
    0x833f3fc8 : 0x2e5bb7 (0x18358cd0 0x0 0x10 0x16fa5f50)
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelCPUPowerManagement(195.0)[D1550426-D346-4805-A777-06 63C69080DA]@0x1d79000->0x1da2fff
    BSD process name corresponding to current thread: Final Cut Pro
    Boot args: -v
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 80851182634766
    last loaded kext at 2359082118391: com.apple.driver.AppleFireWireStorage    3.0.6 (addr 0x10b9000, size 16384)
    last unloaded kext at 2474279225436: com.apple.driver.StorageLynx    3.0.6 (addr 0xdbe000, size 12288)
    loaded kexts:
    com.techsmith.TACC    1.0.2
    at.obdev.nke.LittleSnitch    4050
    com.apple.filesystems.exfat    1.1
    com.apple.driver.AppleBluetoothMultitouch    70.12
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.AudioAUUC    1.59
    com.apple.kext.ATIFramebuffer    7.3.2
    com.apple.ATIRadeonX1000    7.0.4
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.driver.AppleMCEDriver    1.1.9
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
    com.apple.driver.AppleLPC    1.6.0
    com.apple.ATIRadeonX3000    7.3.2
    com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.Oxford_Semi    3.0.6
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.driver.AppleIntelPIIXATA    2.5.1
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AppleIntel8254XEthernet    2.1.3b1
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.driver.AppleUSBUHCI    5.1.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.AppleMultitouchDriver    231.4
    com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
    com.apple.kext.triggers    1.0
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.kext.ATI1900Controller    7.3.2
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.driver.AppleUSBAudio    2.9.0f5
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.kext.ATI5000Controller    7.3.2
    com.apple.kext.ATISupport    7.3.2
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.iokit.IOUSBMassStorageClass    3.0.3
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
    com.apple.iokit.IOFireWireSerialBusProtocolTransport    2.1.0
    com.apple.iokit.IOFireWireSBP2    4.2.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOATAPIProtocolTransport    3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOATAFamily    2.5.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.11
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    Model: MacPro1,1, BootROM MP11.005C.B08, 8 processors, 3 GHz, 16 GB, SMC 1.7f10
    Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
    Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
    Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser B/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Memory Module: DIMM Riser B/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x463036313031302020202020202020202020
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
    PCI Card: ATI Radeon HD 5770, ATY,VervetParent, Slot-1
    PCI Card: ATY,RadeonX1900, sppci_displaycontroller, Slot-3
    Serial ATA Device: WDC WD3200AAKS-00L9A0, 320.07 GB
    Parallel ATA Device: OPTIARC DVD RW AD-7170A
    Parallel ATA Device: OPTIARC DVD RW AD-7170A
    USB Device: Cardette 3 USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0612, 0xfd100000 / 2
    USB Device: Cardette 3 USB3.0 Card Reader, 0x0bda  (Realtek Semiconductor Corp.), 0x0301, 0xfd130000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
    USB Device: iMic USB audio system, 0x077d, 0x07af, 0x1d200000 / 2
    USB Device: Back-UPS RS 1000G FW:869.L3 .D USB FW:L3, 0x051d  (American Power Conversion), 0x0002, 0x3d200000 / 3
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52b, 0x3d100000 / 2
    FireWire Device: built-in_hub, 800mbit_speed
    FireWire Device: G-SPEED Q RAID5, 0x1B8C, 800mbit_speed
    FireWire Device: unknown_device, unknown_speed

    Just junk the X1900 for now. At least take it out, take it outside and give it the full treatment.
    X1900
    http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
    http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
    Try with half the RAM at a time.
    Monitor the temps - Temperature Monitor - especially those FBDIMMs to be running below 70*C.
    Amazon has those for $25 (2 x 2GB for Mac Pro 1,1 667)
    Your 5770 will support three displays.
    Use SMCFanControl 2.4+ and set the default fan speed to 900 rpm, and set a couple more profiles for higher rpm just to see if that helps air flow and cooling and if your temps are normal.
    I would also look at running w/o external devices. Like your RAID5. Until your system is stable.

Maybe you are looking for

  • Issue with past purchase of Adobe Lightroom

    I purchased Adobe Lightroom 4 on 10/31/12 from the Apple Mac App Store.  I have been using the software alongside Adobe Photoshop CS6 for the past two years.  My MacBook needs to be set back to its original factory settings and I wasn't sure how to g

  • Recipe App Wanted

    I'm planning to purchase an iPhone soon and have been searching for applications I might want to get along with the phone. I've browsed through the lists in the iTunes store for recipe and cookbook apps but can't seem to find one quite like what I'm

  • Mac book pro turning on problems?

    hi there my macbook pro has stopped working. all it does at the moment is whilst chargering the green light is on the charger. Also when you hold down the battery indicator button is just flashes with one light and goes off. i ve left it on charger f

  • How do I get my iphone 4 to automatically trust my laptop?

    I recently upgraded my iphone 4 to the new IOS 7 and now my iphone won't automatically trust my laptop. How do I get my iphone 4 to automatically trust my laptop?

  • Problem in displaying dates for replacement path with text variable

    Hi all, I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able t