My computer will not boot up from disc

Help i am having issues booting up my laptop, it won't even boot up from a disc what do I need to do??

Hi,
It might be worth resetting the bios defaults as follows.
Shut down the notebook.  Tap away at the esc key as soon as you start the notebook to enter the Start-up Menu, then select f10 to enter the Bios Menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If the above fails to help, open the Bios Menu again and look under the Advanced or Diagnostic tab - should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

    iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine.   Restart and everything is fine.   I have two machine and they behave the same.   Software or hardware problem?

    First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
    If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
    If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
    If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
    If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
    If that fails, reboot it while holding down the command-key and the R-key.
    If that fails, please reply to this and let me know.

  • Computer will not boot up; only rotating wheel. OS 10.7 iMac

    computer will not boot up, only rotating wheel. OS 10.7, iMac

    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
    Re-install if that doesn't work.

  • Computer Will Not Boot

    My computer will not boot and it will not enter Safe Mode. I ran the Memory Diagnostic test and it shows that I have a hardware problem. I also tried to restore my computer to an earlier time but it showed an error. I have 1GB or RAM and recently it keeps changing from 512MB to 1023MB. Please help.
    Specs (that I know of)
    1GB RAM
    INTEL CORE 2 DUO 2.43GHz (I'm not sure)
    Gigabyte motherboard
    OS: WINDOWS 7 ULTIMATE
    This question was solved.
    View Solution.

    try to make shour that the ram is snug and in all th way make shour NOT to jam them in and dont leve a empty slot in betwen them if there craced be shore not to use the in any in the computer check the mother bords slots  and the pins on the ram and make shour that theres no dust stuck in there .              thats all i can think of hope it works out for u.  :^)

  • Will not boot up from DVD drive

    HP pavilion slimline s3200n will recognize the DVD drive but it will not boot up from the drive

    Hi,
    Try hitting the escape button from boot up. It normally gives you the boot options where you can select the DVD drive.
    If you can't get into the boot options, try getting into the bios with F10 and change boot order options.
    Greetings
    Philippe
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

  • TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

    my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

    Do you have a compatible OSX installed on this 'storage' HDD?  If not, it will not boot your MBP.
    Ciao.

  • Computer will not boot up.   a circle with a line thru it appears.

    All of a sudden my computer will not boot up and a circle with a line thru it comes up.  What is the problem and what can I do to fix it?

    Hi, master hunter. 
    The most common meaning of this symbol is that something in the operating system is damaged.  Here is the best resource when troubleshooting this behavior. 
    OS X: About kernel panics
    http://support.apple.com/kb/TS3742
    If you prefer us to assist you with this issue, contact us here.
    Cheers,
    Jason H. 

  • Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

    computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

    Which computer? Which Windows?
    What are you trying to do?
    -Jerry

  • Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

    Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

    Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

  • Help needed on startup. My computer will not boot from the CD drive!!!

    Problem with iMac G3 333, the Message on the screen states: "The System Software on the starup disk only functions on the media, not if copied to another drive." Like a fool, I copied the system folder from the original system software 9.2.2 on to the iMac. System disk which is not a complete system folder when used on the computer. I have searched the Internet, but can not find an answer. I have tried everything, holding down the C key, "Delete, Opition, Apple key, shift" holding the mouse down on startup, various combinations of other keys, etc. The CD starts to spin, but the computer switches to the hard drive and the message above returns. No matter what I try I still can't boot from the tray loading CD drive. Is there any Firmware code that I can use. I know how to access Firmware on the Imac and can boot the iMac using Firmware, but I don't know how to use Firmware to boot the CD drive which I need to do so I can reload the original software. CAN SOMEONE PLEASE HELP? Thanks, Jim

    Yes, I have tried both System Softwares a number of times. The C key will not boot up the CD drive and the harddrive always boots with the original message. I need to get the CD drive to boot so I can reloaded tge original software. Do you know anything about booting the CD drive using Firmware? Jim

  • Computer will not boot up.  I have tried running disk utility and re-installing OSX.  It says disk locked

    I am new to Macs and have bought a 13" Macbook Pro and a IMac 21.5" 14 months ago.  I have only used the Macbook pro about 15-20 times and after upgrading to Maverick it will not boot up.  I get the white screen and a spinning circle.  I have tried Disk utility repair and even re-installing the OSX, but it says disk locked.  I do not recall setting any password protections or passwords.  I now have a brick with a lit up Apple logo.  If anyone knows how I can bypass the disk lock error or reset the laptop, please let me know.  This has not been a pleasant conversion from PC's.  Even my IMac blacks out from time to time and both happened right after my factory warranty expired.

    The internal drive is malfunctioning. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • I want to wipe iBook of it's content, but it will not boot up from DVD

    Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
    I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
    Thank you for any help from out there.

    No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
    Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
    At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
    How to Nuke an ATA Hard Drive
    http://ata.wiki.kernel.org/index.php/ATASecureErase
    Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
    If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
    Linux Release Watch
    http://distrowatch.com/

  • Blue screen, computer will not boot up

    My computer, when powered up gets stuck on a blue screen and will not boot up. I have restarted & held down the shift button for safe mode & it goes to a white screen with a grey apple icon but will not move past this screen. How do I get the computer to boot up?

    Sounds like your system is hosed. Try [repairing the hard drive with Disk Utility|http://support.apple.com/kb/TS1417]. Of course, from the sounds of it, even if you get the drive repaired, it may not fix the problems with your system.
    Do you have backups? If not, your only priority at the moment should be to figure out how to back up your data, or what data may still be intact if your drive is badly damaged. If you have another Mac, the easiest way to do this will be to boot the machine into [FireWire target mode|http://support.apple.com/kb/HT1661] and copy whatever data you can.

  • Hp pavilion elite e9120y pc computer will not boot up. memory could not read

    HP Pavilion Elite e9120y PC  Vista Computer wil not boot two error messages 1. instruction at 0x74d605ef referenced
    memory at 0x00000114. The memory could not be read  2. Error 0x40011002000001012 if this issues continues. Please contact HP Support

    Hi @gjtomlin ,
    Thank you for visiting the HP Support Forums and Welcome. I have read that you are interested in re-install the operating system back on your HP Pavilion TouchSmart 14-b109wm Sleekbook. Try performing a hard reset.
    When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Here is a link to computer won't start for Windows 8.
    You might benefit from a Windows 8 refresh.
    It load defaults on the Notebook without disks. Here is a link to your drivers and software page.
    I hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Mini will not boot disks from combo drive

    Mini was having "issues." Thought I would do a clean install to correct all problems. When I insert OSX install disk and hold "C" key the computer tries to boot from the disk. The grey screen and apple logo apear. But instead of then going to the little spinning grey bars and booting to the disk, the grey apple shifts to the right and a some trash appears to the right of the logo, the computer freezes.
    I have run the computer in terminal mode and run disks on the optical drive just fine.
    It simply will not boot off of a disk in the optical drive.
    HELP!
    12 Powerbook G4, iMac G4 Flat Panel   Mac OS X (10.3.7)  

    Try booting into safemode by holding down shift key. Sometimes it does take up to 5 minutes to boot into safemode but sometimes your atleast able to uses your computer as a temporary fix. If you can't boot into safemode it sound's like your hard drive has failed, in that case you would need to contact apple for a repair.

Maybe you are looking for

  • Issue Importing measures against dimensions loaded via SSIS

    Hi, We are new to BPC and currently working in a test environment.  We are having issues with importing measure data against dimensions that we are attempting to automate via SSIS.  I will apologize in advance for the long post, but want to give as m

  • Problem using mDP-DVI-D adapter.

    Hi! This is my first post on this forum since I just bought my very first mac! Everything has been painless until today. Since I had a DVI-D - HDMI cable from before (which I used with my old PC to connect to my TV) I figured I'd go and buy myself th

  • Ipod 4th g messed up in a prank and it wasnt my fault

    i rececntly was at band camp this past week and while i was there some other campers in my quad thought it would be funny to take my ipod and plastic wrap it and put it in jello. that whole day i was looking for my ipod asking if they had seen it, th

  • Need to Reinstall Cleanup Application in Lenovo P70 as got delete by mistake

    Hi Everyone, Please could anyone suggest, I need to Reinstall Cleanup Application in Lenovo P70 as got delete by mistake. Your help will be highly appreciated

  • Problem transferring video using RMI

    Hi frnds...I have a code which transfers images using rmi.....this code works fine.....but if i give a .avi file instead of a .jpeg the file gets transferred to the other machine but it gets corrupt...the size is also the same.....do i have to encode