My computer will not start up. the message diplaying says 'startup test failed'. any tips??
my computer will not start up. the message diplaying says 'startup test failed'. any tips??
Hi,
Do you know which test your notebook failed? If you don't know, try the following.
Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
I am trying to start a movie and it will not start. The message is, "an error occurred loading this content". Has anyone had this message before? Any solution?
Hi there TonyCashio,
You may find the troubleshooting steps in the article below helpful.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
-Griff W. -
Lightroom will not start up the message I get is
A problem caused the program to stop working correctly Windows will close the program and notify you if a solution is available.
LostThank you I'll try that
Date: Wed, 16 Nov 2011 13:54:08 -0700
From: [email protected]
To: [email protected]
Subject: Lightroom will not start up the message I get is
Re: Lightroom will not start up the message I get is
created by web-weaver in Photoshop Lightroom - View the full discussion
Try it one more time - unless you have tried it already more than once.If the message appears again, you have to re-install LR.You can download the latest version from Adobe using your Serial key #.WW
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4030407#4030407
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4030407#4030407. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?
I am trying to run a hardware test. The Computer will not start with the "D" key held?
If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510 -
My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?
Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock -
Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guysOkay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;) -
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?
Carolyn Samit wrote:
iMac, Mac OS X (10.7.1)
Use Command + R for Lion Recovery
Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition. -
when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT3964 the indicator light on my mac book pro does not come on and the computer will not start
what can i do if the indicator light on my mac book pro does not come on and the computer will not start?
Here are a couple of trouble shooting articles that may assist you:
http://support.apple.com/kb/ts1367
https://discussions.apple.com/docs/DOC-3353
Ciao. -
My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success
Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367 -
My computer will not start. Just the wheel spinning
My computer will not start. I get the apple with a spinning wheel.
What is happening?Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
My computer will not start the screen is white.
My computer will not start the screen is white and the little circle just keeps going and going. What do I do? I have a 2010 Macbook pro 15 inch running Mountain Lion. I have already tried holding optin+command+p+r. Help Please.
Start with this support article:
http://support.apple.com/kb/ts2570
Ciao.
Maybe you are looking for
-
I have Windows XP installed on my IMac but can't seem to find it except under VMware and then it has this error message: There is no application set to open the document "Windows XP Professional-s001.vmdk". How do I get Windows XP to work? Should
-
Trying to publish an iBook and having major problems at the last step. Here is my error message: Apple's web service operation was not successful Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERR
-
Payment blocking for MIRO invoice.
Hi, We Need to build Payment release workflow for MIRO invoice. If the invoice amount exceeds 10000, that line item need to be blocked and shoudl be sent a mail for approval. My doubt is, whether the payment blocking is done by configura
-
Re: Remove log messages from loop
CURSOR cur_item_rev_child IS SELECT ffv.flex_value, --org code mp.organization_id FROM fnd_flex_values ffv, fnd_flex_value_sets ffvs, mtl_parameters mp WHERE ffv.flex_value_set_id = ffvs.flex_value_set_id AND ffvs.flex_value_set_name = 'EMR Add Spec
-
Hallo, XI-experts, I would like to test the Partner Connectivity Kit. What product need I for this item ? I have saw in SAP-Shop: -SAP Exchange Infrastructure 2.0 SR1 -SAP NetWeaver 04 SR1 What of this product must buy my company? Many thanks ! With