My computer will only let me backup 5 versions of my iPhone on iTunes?

I recently somehow lost a years worth of backups on my computer, just disappeared.
Now more recently It will only allow me to backup 5 files total. Erasing and overwriting my 5th every time.
I have more than enough space. I don't know what the problem is.

Re: I cannot upgrade to itunes 11.1 os xp pack 318 minutes ago
Check this out, it worked for me I have windows xp pack 3
Good luck , Xhoco.

Similar Messages

  • I have 2 Apple IDs but itunes store on my computer will only let me log into my old one and not the new one...HELP!

    So i had an old apple id i had created to use with my ipod but never ended up syncing them.  So when i got my iPhone i created a new apple ID with my new email address.  Well i went to log into itunes store on my computer (PC) and it wont let me log in with my new apple ID, just the old one.  I get the same message everytime i try it: "We could not complete your iTunes Store request.  The iTunes store is temporarily unavailable.  Please try again later." so i did try again.  and again.  and again.  its been a few weeks now and it gives me the same message everytime.  Its frusterating because everytime i sync my iPhone to my computer to backup and whatnot, all the music i bought on my phone doesnt sync and undownloads itself from my phone.  What can i do??

    Hello nat.weidner
    Start with the article below for troubleshooting issue with connecting to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My computer will not let me click the box in iTunes where it says "sync only checked music and videos." So i cant unsync songs that i don't want on my iPod but still want in my iTunes. HELP?!

    My computer will not let me click the box in iTunes where it says "sync only checked music and videos." So i cant unsync songs that i don't want on my iPod but still want in my iTunes. HELP?!

    These are your options:
    1. Restore the iPhoto library from the most recent backup that predates the issue.
              Advantages: Always works, if library damage is causing the problem and the backup is intact.
              Disadvantages: Impossible if you don't have a backup. All changes made since the backup are lost.
    2. Repair or rebuild the library. Be sure to back it up first.
              Advantages: May solve the problem with no loss of data.
              Disadvantages: May fail. May take a long time if the library is large.
    3. Scavenge the library with a third-party application called "iPhoto Library Manager," which you can find in a web search. From the application's menu bar (not the iPhoto menu bar), select Library ▹ Rebuild.
              Advantages: All images should be preserved.
              Disadvantages: All books, calendars, and slideshows will be lost.

  • HT4859 I backedup iphone 4 and iphone 5 to icloud. I need contacts from the ipone 4 backup but I do not have that phone anymore and icloud will only let me restore the iphone 5's backups now. Is there anyway to get the contacts from my previous iphone 4?

    I backedup my iphone 4 to the cloud before upgrading to an iphone 5. I also backedup my iphone 5 to icloud. I can see both phone's backups side by side on the my screen on icloud. But it will not allow me to restore the iphone 4 backup to my iphone 5.  I need contacts from the iphone 4 backup but I do not have that phone anymore and icloud will only let me restore the iphone 5's backups to my iphone 5. Is there anyway to get the contacts from my previous iphone 4 backup?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • My phone is stuck in recovery mode, and iTunes will only let me restore to factory settings.  My question: Can I restore from iTunes backup after restoring to factory settings?

    I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings.  My question: Can I restore from iTunes backup after restoring to factory settings?

    Hi, kformagg
    I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
    It worked very well.

  • When I update my iphone software, I lost my old contacts.  I see the backups under devices but it will not allow me to restore when I right click.  It will only let me delete the backup.  How can I restore this backup?  Thanks!

    When I updated my iphone software, I lost my contact information.  I see the backup on the devices menue in iTunes.  However, it will only let me delete this backup and not restore it.  How can I restore my old contacts to my iPhone?  Thanks!

    You will have to restore your iphone.

  • Upgraded to Lion, CS3 programs will only let me open 1 photo per session, what gives?

    Just upgraded to Lion from Snow Leopard. Now my CS3 Creative Suite programs will only let me open one picture per session. I then have to completely close out of photoshop or illustrator or whatever and reopen to open another picture. Any suggestions before I have to take my computer to the apple store.

    http://roaringapps.com/ show some people having problems with various things. Have you tried reinstalling CS3? If that doesn't work, restore from a backup if needed to stay in production until a solution or an upgrade can be worked out.
    I'm not sure the Apple Store will troubleshoot 3rd party software that is 3 versions old.

  • My computer will not let me sync my ipad?, my computer will not let me sync my ipad?

    My computer will not let me sync my ipad ? it is saying i need to download the vesrion 64 and when i do it tells me i allready have the latest update.

    becky8317 wrote:
    I synced my Ipad 2 with my friends computer to download some songs. I plugged it into my computer, and no matter what I do, it will not let me transfer any of the songs, and if i go to sync, all it says is it will erase everything. Please help!
    By design the iPad will only Sync with one iTunes at a Time, so what you are experiencing is expected behavior.
    See Here for...
    Syncing with iTunes
    And Here...
    How to transfer or sync content to your computer
    From Here...
    http://www.apple.com/support/ipad/syncing/
    Ipad User Guide

  • I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
    10.8 Mountain Lion is a download from the App Store, the price is $19.99.
    Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
    Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • I have upgrade to IOS 8 and all Fotos are ereased and on my Computer is only the last Backup and there a no Photos now what can i do?

    I have upgrade to IOS 8 and all Fotos are ereased on my Iphone and on my Computer is only the last Backup and there a no Photos now what can i do?

    You really need to try this on a computer, not on the iPad.
    Seeing how what is in the cloud is also on the iPad, if the content is not on the iPad, there is a good chance that the content is lost. But you can try logging into www.icloud.com in a web browser on a computer and log into your account and see if you can get into the Pages app. You may have to sign up for iCloud drive if you didn't do so already. Make SURE you that you read the blurb that will pop up in that window in iCloud for more information.

  • My computer will only boot off it's drive in safe mode

    Short Story...
    My computer will only boot in safe mode and in normal mode displays grey apple that turns into a grey cross. Surface scan in techtool pro 4.5.1 passed
    Long Story... (all the issues I've had as they are all back to back and most likely cause by what sloved the previous one).
    When i first got my macbook i already had a 500gb hdd in my macmini running 10.6 (or 10.6.1 I forget) and as soon as a had the macbook running off this drive it would give me one error for each and every movie file that was visible (in an open folder or on the desktop) saying quick look helper had unexpectedly quit. I tried everything and for some reason ended up changing all the permissions on the computer which royally screwed it up. anyway after repairing permissions in disk utility the error messages stopped but shortly after start up it was giving me a couple of dozen error messages saying something about .kext's (if requested i can supply full text of this error message) so i tried reinstalling the OS and since in 10.6 there is no archive and install (without messing around in terminal) i just ran the snow leopard disc which brought me back to 10.6 then I upgraded to 10.6.2 and restarting a couple of times over a day or so. After a few restarts I found the computer wouldn't start (it chimed, loaded up the apple symbol and loading wheel and then after a few minutes replaced the apple symbol with a crossed circle) I tried running the snow leopard disc again and this time not upgrading but after about 3 restarts the same thing happened. now i can only start up in safe boot mode or off my backup drive which still displays a few dozen of the .kext errors at start up. Sorry about the length of this description I would appreciate absolutely any help or ideas.

    Tezz wrote:
    Short Story...
    My computer will only boot in safe mode and in normal mode displays grey apple that turns into a grey cross. Surface scan in techtool pro 4.5.1 passed
    I would try troubleshooting your problem [using the steps given by Apple here|http://support.apple.com/kb/TS1892].

  • HELP  Just restored iphone 4 from itunes and now it will only let me use the phone for emergency calls.

    Just did the restore feature on my iphone 4 from the itunes account.  Now the iphone will only let me use it to make emergency calls.  When I connect the iphone to my computer it is not even recognizing the phone.
    Help - how do I get all my info back on so I can use the iphone??

    Sounds like a computer issue.
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • ITunes will not let me backup and sync to new phone encrypted password??

    iTunes will not let me backup and sync to new phone encrypted password?? I've never set a password for my old iPhone 3gs but tried my old Apple ID sign-in passwords to no avail. I've simply sat here so frustrated....my husband sync'd his new iPhone 4 no problem, somehow the checkbox shows Encrypted password and I'm at a loss on how to change this/find the password and transfer my old backup onto my new phone so I can use it. Can anyone help? Tnx

    John,
    buy an iTunes Music Card and redeem it to your account - the "none" option should be available then.

  • My computer will not let me open itunes at all. It tells me that the itunes library can not be read because it was created by a newer version of itunes. What to do? Please Help Me.

    My Computer will not let me open itunes at all. It tells me that the itunes libary can not be read because it was created by a newer version.

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

    When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
    == This happened ==
    Every time Firefox opened
    == I updated to one of the firefox versions (Not sure which one it was)

    Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Maybe you are looking for

  • GT70 2PC: 870M does not activate, benchmarks and performance ingame confirm this

    I bought myself a GT70 2PC Dominator (the SSD version) with an 870M inside, and after starting several games, checking benchmarks and comparing framerates to my current desktop machine (which has an i5 2500K and a GTX 770), I find that, even after co

  • Unity - Greeting Player in Browser -- Java Issue

    Guys, I have Unity conneciton 9.x,   The embed Java greeting player is not working.. I suspect one of these reason : Java version ( too rescent ) Too much security on Java Browser version issue ... I have try many thing,  lower security, try 3 differ

  • Resolution of charts

    Hi All, On executing a WAD report, the graph does not have appropriate display. It is blurred and straight lines appear as several dots. Are there any settings in WAD to improve the resolution of charts?? If yes, then where can I find these settings

  • Need to fetch records which comes after in the sequence

    The data in the subject area is something like this: seq activity enddate 1 Requirement Gathering 15-Feb-13 2 Analysis 20-Feb-13 3 Function Documentation 25-Feb-13 4 Development 25-Mar-13 5 Test 10-Apr-13 6 Migration 15-Apr-13 In the report I need to

  • Help please, the leds my t61 turn on though not even the BIOS appears on the screen

    The title says all. After installing (dont know if it really have something to do) a modem usb and shutting down the laptop, the case, to transport it, i open it and the leds where turn on but no image appears. Then, i decide to force the reiniciate