My computer will recognize, but not charge, my iPod nano

I have a Dell laptop with a docking port and it will recognize my iPod and update it, but once it's finished updating, it stops charging too. The first time I charged it, it worked fine, but now it won't charge anymore. . .Help, please?
thanks
Sarah

Have you tried going through this article: iPod not recognized when connected to Windows laptop over USB. Sometimes it doesn't want to give the iPod any charge because it wants to keep it to itself (it's like a human, very greedy).

Similar Messages

  • Shuffle will play but not charge. Help please!!!

    My shuffle will play songs but when I try t plug into my computer it will not charge. My computer won't even recognize it. It only has a little bit of charge left. Does anyone know what is going on with it? Is it dying?
    Thanks

    Well, now I'm starting to worry. I'm coming up on the 13-month mark myself.
    You might indeed be correct about your 'mechanicals' evaluation, but there's no way short of disassembly, inspection and testing to determine that. Someone, sometime is just going to have to take that on.
    The disassembly part looks dead easy and it should be simple to at least check for continuity from the plug down to the end of the ribbon connector. Maybe I'll buy another 'dead' one off of eBay and look into it (the first 'dead' one I tried turned out to be very much 'Alive On Arrival', no very big surprise, and is now camped in a daughter's eMac).
    If you're still doing last-gasp things on your Shuffle, in the meantime, I'd be trying the following in your place:
    a) Plug it into a valid charging port/dock/etc. for an extended period of time, a couple or three hours at least. You might see it mysteriously mount; this will be welcome but won't provide any real answers. If nothing else, this will allow the battery to charge if it's going to at all, albeit with no indications.
    b) Log out to a Restart, then open a new/go to a different User Account with Admin privileges.
    c) With iTunes off and iPS not plugged in, locate and open your lastest iPod Updater. I use 2005-11-17.
    d) When it says to plug in the iPod, turn the Shuffle ON and then plug it in. Now wait for it to mount on the Desktop and to be identified in the Updater. Be patient, give it some time; I'd probably let it soak for 10-15 minutes or so.
    e) If no mounting, then — with it still plugged in, if at all possible, one place where the Dock shines — manipulate the controls. Triple-click the Play/Pause, then turn the Power to OFF for 5 seconds or so, then back on. (Note: Apple instructions only call for a Reset, i.e., PWR OFF for 5 secs., but some anecdotals seem to indicate the Playlist Reset also seems to help).
    f) If you have to unplug to manipulate, then do that and plug it back in
    g) This might kickstart it into mounting. If so, fine. If not, unplug and turn OFF the iPS, close the Updater, then repeat from (c) above.
    h) I'd give it three times through the sequence, which seems like a fair enough shot at working.

  • My computer and itunes does not recognise my ipod nano

    I had to return a faulty ipod nano. The replacement isn't recognised in My Computer or in iTunes.
    I think this might be to do with the registration of the first nano still being recognised?
    I have reinstalled itunes and followed the 5R's in the manual, but the ipod is still not recognised eg. Will not sync.
    A dialogue box displays the following message:
    'an ipod has been detected,but it could not be identified properly...'
    Can anybody help?

    I am facing the same problem, buddy. My iPod nano is not recognized by my MacBook Pro nor by iTunes.
    I tried everything suggested in trouble shooting. Looks like, I will have to visit an apple store soon to get it replaced/exchanged.

  • Computer will recognize my iphone but not my wifes

    My wife and I both have Iphone 4's that have been set up on the same computer.  Recently the computer will recognize my phone but not my wifes.  When I plug her's in, I get a double chime and that is it.  Plug mine in, get a single Chime, and Itunes opens and syncs.  I have removed Itunes and the supporting programs, including Bonjour, and reinstalled.  It did not work.  Also I took her phone to the Apple store, it recoginzed on their computer there and they installed IOS 5 for us.  Got home and still nothing.
    Any help would be great.
    Thanks

    Hello: Thanks to all who replied or read my concern. I was able to solve the issue on my own. What I forgot to mention in the original post was that both my wife and I were attempting to use the Free App " Find My iPhone" from the App Store to set up Find My iPhone which I'm not certain if that was the source of the headache.
    At any rate, I simply deleted the app from both iPhones and set up them up in iCloud using the same AppleID account and password which is what it said all along-but I was not getting it. After doing so, both my iPhone and my wife's iPhone are listed in My Devices.
    Best Regards,
    Marty

  • HT4060 I am unable to charge my IPAD on the computer and it says not charging. Tried on 2 computers but same issue. Any Suggestions?

    I am unable to charge my IPAD on the computer and it says not charging. Tried on 2 computers but same issue. Any Suggestions?                   

    That's normal. Most USB ports dont' put out enough power to meet the iPad's requirements. (It says 'not charging' even though there is a trickle charge...it will charge over USB, but it'll take hours and hours)
    Your iPad is best charged with the supplied charger plugged into the wall.

  • After updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Otherwise you are out of luck. Apple is not making any more update for the 4G.
    Also check with Phillips. Maybe they have an firmware update available

  • Why does my computer say that its plugged in but not charging yet the battery is not reducing

    it says plugged in, not charging, 99% (battery life)
    but the battery life is not reducing & hasnt for 2 days. it just stays like that.
    hp pavillion dv5-2132dx    laptop
    windows 7 64 bit
    i have had a few weird occurences and im not sure what caused it. abruptly my speakers would stop working & my battery life would start reducing. that happened i think 3 times over the course of several months. this last time which was the 3rd is when i changed electrical outlets thinking that maybe that was the problem. and the power & speakers immediately went back to normal. its only been a few days since i changed outlets & everything is working as it should be however as mentioned the battery icon on the taskbar says that its plugged in but not charging & it remains at 99% for the last 2 days.

    Hi,
    First of all, shut down the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for 30 seconds.
    Now, plug in the AC Adapter without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and the Microsoft ACPI Compliant Control Method Battery and select Uninstall - do not uninstall anything else here.  When the uninstall is complete, shut the notebook down, unplug the AC Adapter, re-insert the battery and then start the notebook on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the notebook again.  Now plug in the AC Adapter ( with the battery still inserted ) and start the notebook to see if this has helped the charging issue at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My HP Envy 15-j051 does not charge when computer is on but does charge when powered off

    whenever I am on and plugged in if get plugges in but not charging yet when I shut down and keep power supply plugged in it charges the battery. I have checkd the battery and it said primary-OK (1) dis systems check all passed
    This question was solved.
    View Solution.

    @lagrit1023 ,
    Hello and thank you for posting on the HP support forums.  What you may have happening here is a problem with the power regulation on the motherboard or an issue with not enough amps  from the power supply.
    Can you try the power supply on another notebook or have someplace you can take it to be checked?
    The only other way to check this if you have already done the battery checks and so on is to get the system sent in for repair.  For this you will have to contact HP phone support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Please let me know how things go.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • No computer will recognize iphone... LONG

    Ok here we go I will describe what im experiencing as best as I can
    I bought an I phone 2g from ebay, auction stated iphone no longer charged, simple fix.
    got the phone sure as S*&^ it wouldnt, unless, I connected it to my ipod connector in my truck, the one that connects to the back of the stereo directly, not an fm trans/ cig charger. The phone came to life, but would not charge, it thought it was but after unplugging it just died, messed around in the settings turned everything off and let it sit for a few hours. came back to it pulled it off the charger and died. So i did the restore from the settings menu, wiped everything start from scratch. I was gonna do it anyway so I hoped that would fix the hiccup with charging. I let it format and charge overnight.
    Now the phone has a full charge and stays onn when off the charger, the phone is telling me to connect to itunes to restore, here inlies the problem. No computer will recognize the iPhone. steps i have tried, recovery mode and dfu mode, iphone will not enter these modes, does it need to recognize it is connected to the computer to enter these modes? I have tried both numerous times it just resets shows the apple logo and returnes to the connect to itunes screen.
    I have tried to verify the usbaapl.sys file is there and amd services are running, on my xp laptop everything is good, although the usb might be a 1.0 version, on my new hp I have vista 64, i cannot find the sys files anywhere. I have uninstalled and reinstalled itunes, even tried version 8.1 still no luck. Also tried plugging into my friends mac, no luck, I dont know anything about macs so I didnt go poking around.
    I also have a brand new usb dock data cable, not just a charge cable.
    Now question for all that are smarter than me, how do I test if there is something wrong with the logic board or anything interior? Any ideas, please dont say try entering dfu or recovery mode, the iPhone will NOT do it, or are there other ways of doing it without the press and hold... release... 10 sec blah blah.
    Should I just send it in to an online place that does free inspections? if so do you have recommendations?
    thanks to all

    go here:
    http://depot.info.apple.com/ipod/
    alternately, take it to an Apple Store...

  • Some songs, which are bought in the iTunes store, will be played iTunes but not on my iPod touch. Has somebody an explanation for that? Thanks,

    Some songs, which are bought in the iTunes store, will be played iTunes but not on my iPod touch. Has somebody an explanation for that? Thanks,

    No, you should have Restrictions OFF.
    Computer's iTunes > Preferences > Parental Preferences > everything should be unchecked.
    Are the songs also on computer's iTunes?

  • OS X 10.4.11 will send but not receive faxes on Power Mac G4 MDD

    OS X 10.4.11 will send but not receive faxes on my Power Mac G4 MDD. Perhaps I should remove the relevant .plist preference file(s). But which one(s) is it /are they? Or is there something else I should do?

    Thank you for your reply, BDAqua. I have set the fax feature to answer after 3 rings, but the phone rings only once when someone is trying to send a fax. The phone icon in the menu bar changes to "ringing ..." but nothing more happens. The phone line on which I receive faxes is dedicated to that use. I phoned in to its number earlier today from another phone. I heard it ring once and then it went to the busy signal. I then disconnected the fax phone line from its wall jack, connected a phone to the jack, and phoned in to it. The phone now rang and rang as it should. So this confirms the assumption that the fault is in the computer, presumably in the Print & Fax software. I should also mention that I don't find com.apple.print.FaxPrefs.plist in /Library/Preferences.

  • If i install mac os x lion the information of the computer will erase or not?

    f i install mac os x lion the information of the computer will erase or not?

    It shouldn't but you should never upgrade to a new OS without backing up all your important data first.
    Mac 101: Time Machine

  • My MacBook Air will send but not receive Airdrops?

    Does anyone know why my MacBook Air running OS X 10.9.4 will send, but not receive, AirDrop files?  I've tried to see if there are any security settings blocking receiving but have been unable to find anything.  Thank you!

    If the firewall is on, turn it off in the Security & Privacy preference pane. Otherwise see below.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My new Apple password works on my computer and ipad but not my 4s. help!

    I had to reset my apple password because apple store wouldn't let me use my original one for some reason.
    Now I have a new password and it's working on my computer and ipad, but not my 4s, so if I needed an app, I'd have to get it from ipad and it'd sync to my phone.
    I've tried turning my phone on/off, sync with and without wire, called for help (they want $35), nothing works so far. Please help!

    thank you for the quick reply. I've done that I believe but will do so right now and see it it works......
    omg it works this time!!! Thanks so much.  : )

  • Battery plugged in but not charging

    Hi @all,i need help, my laptop when it is switched on it plugged in but not charging. If i switch the laptop off it is loading normally! For me it looks like a safety for the battery, that if you have conected with charger that it is not always charging?Can you please help me out here?The type is a HP Envy TS 15 NotebookWIndows 8 installedthanks and regards

    Hi, I have an HP Envy 15 TS.  Same problem. As long as the laptop is turned off, the battery charges. As soon as I turn the laptop on, the battery stops charging. According to HP's website, when the adater is connected the led next to the connector should turn white if there's current flowing. If the battery is charging, the led should turn orange.  When the laptop if off and I connect the adapter, it's orange. When I turn the computer on, it turns white. In Windows, the battery icon says that it is connected, but not charging. The laptop is new, purchased about 3 months ago, and because of this issue it hasn't been used. I also get the "you can get a better experience with a better adapter" message. The adapter is the one provided with the laptop. I have talked to support on the phone. They disabled quick launch to get rid of the "better experience" message but they failed to identify root cause for the charging issue. Batter is ok according to tests. Adapter is also ok. Support said to take the laptop to a support center. Did that. They were baffled. Laptop came back the same after a little over a week, and the apologized for not being able to find the issue and didn't charge anything for the work. That is how baffled they were with the issue. The technician told me that after working with the Envy he noticed that another laptop, from a different vendor, had exactly the same issue. He also noticed that in the case of that laptop there were a few pending updates for the operating system. He said he applied those and things started to work as expected. He applied all the available updates for the HP laptop, including BIOS uprades and the problem persists. TIA, Marcelo

Maybe you are looking for

  • Macbook to sony bravia but no sound through TV?

    Ok. I successfully connected my macbook to my sony bravia L Series, but I can only get the sound to play through the laptop. is there any way to have it play through the tv when i watch online vidoes? thanks.

  • How do you connect a usb printer and usb external hard drive to the airport extreme, as it only has one usb port?

    I'm thinking about upgrading my old 802.11g router for a new airport extreme. Can it connect to a usb printer and external hard drive at the same time and acutally work. It only has one usb port on the back. thank you!

  • How do I get eprint to work with my ZTE 4LTE phone

    I downloaded the HPeprint ap on my ZTE 4LTE cell phone, but I cant figure out how to make it work. I have WiFi at home.

  • Urgent do help me

    I am creating a discussion form site and in this site one page is for posting the comment or reply.I want to create the page some what similar to the yahoo compose page,ie, for the text which I enter in the message box I shopuld be able to copy, cut

  • Design Question For Professionals

    Hello, Please can any professional design artist tell me what is the best software for creating crisp and professional looking flyers/posters/leaflets and publications of that sort? Example, once i used Adobe Fireworks to create a flyer design. I sen