My computer won't recognize my camera

I loved iPhoto when I first got this now I'm only frustrated.  My camera isn't recognized so I can't down load new photos. If I ever so gently disconnect I see my camera show up for a spit second. I also have photo stamps? or extras that came with the computer and I keep deleting them but for some reason they don't go away. I've also tried deleting ibooth photos which keep duplicating and won't go away. I do empty the trash but it hasn't helped. Any ideas?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Similar Messages

  • Computer won't recognize iPhone camera

    I used to have an original iPhone and I used to be able to import my camera roll. It randomly stopped working after a couple of months. I now have a 3GS and it still won't work. I have a Dell Inspiron running Vista. iTunes will still recognize my phone, but my computer won't recognize my phone or the camera. Any ideas about what happened or how I can import pictures again?

    In my case, the computer stopped showing images that were on the iphone and only showed blank squares.
    You might try this. Open the Image Capture application on your Mac. Open the menu item, Devices > Browse Devices.... If there is a Local Device called Digital Camera rather than the name of your iPhone, see if there is a Connected box that is not checked. Check it and you may find that the device will change to the name of your iPhone and things may begin to work.
    If it is checked, you might try unchecking and then rechecking the box.
    If your iPhone doesn't show up in the Local Device list, this might point toward the problem. Call iPhone support.

  • 10.8.5 won't recognize my camera for download

    My computer won't recognize my camera for picture downloads.  Worked before with older Mac system.

    Your Panasonic should work fine under normal circumstances.
    Remove the firewire hub from the loop. It will be a trouble maker.
    Formatting must be Mac OS Extended. To check it, go to the firewire icon on your Desktop and right click it then select Get Info.
    If it's not Mac OS Extended, use the disc utility to re-format, be aware that this will erase all files so BACKUP any imortant files before proceding.
    You will need a spare firewire port to plug in the camera. Some externals have two, if yours has two, try it, otherwise you will have to add the suggested card to add the additional port.
    Does the G4 have two?
    The card arrangement gives you an additional BUS and is light years ahead of a firewire port for video editing.
    Al

  • After installing 10.9.3 computer won't recognize Canon SD 1200 IS camera: get message "a camera was not detected".  Any suggestions?

    After installing 10.9.3 computer won't recognize Canon SD 1200 IS camera: get message "a camera was not detected".  Any suggestions?

    I have an older Kodak which they have stopped supporting and I have to take out the SD card and put it in the card slot to download pictures.  I read other threads where this solved similar problems for others.  Some have a separate card reader but I just use the one on my imac.  Wish it was more convienent to get to it though.

  • Computer won't recognize my Mini

    Our computer recognized our Ipod until we tried to update it. Once updated, the adapater picture came on and now the computer won't recognize it. In stead we get the adapter picture. Tried to reset after leaving the adapter on it all night and it won't reset. We get the apple then the adapter picture. The computer doesn't know it's there either now. Again tried to reset, get the apple and the adapter. Just one big circle. Any suggestions?

    Circuit City just fixed my ipod after having the same problem, just my luck they were running a free clinic this week. Anyways, mine did the same as yours, worked fine til I tried to update it, then it showed nothing except the AC adapter icon, even after it was plugged in with the thing! So what they did was to use something called a firewire. It has 2 plugs on one wire, one for the AC adapter and one for the USB at the same time. They fixed it within a matter of minutes, re-set it, declined the update and tada! You can buy a firewire for about $30 just about anywhere. I hope this helps you.

  • Computer won't recognize my 6GB Creative Zen Mi

    I have tried all night to try to get my Creative Zen Micro up and running. I recently lost all my songs and it started back up and running again except the computer won't recognize my device. What should I do? I just want to add all my songs back but it won't read it. What is going on?

    newmanm wrote:
    I'm running Windows XP SP2 and the firmware on the Zen is .02.05 (which is what came installed).
    Is the player still showing this firmware? I assume you can boot it normally, if so check System > Information just to be sure.
    When you connect the player to the PC, what's showing in Device Manager? Is the player listed without error and with a driver version?

  • My new computer won't recognize my printer (HP4500 Officejet Wireless) in the wireless or wired mode

    MY new computer won't recognize my printer in either the connected or wireless mode.  When I hit "search for printers" it finds my neighbors wireless printer 100 yards away, and another net, but not mine sitting right beside it.

    Hi,
    Have you installed its software abd drivers on your computer yet ? Please use the CD which came with the printer. By the way, what is your Officejet 4500 ? It must be G510something.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed.  Now it's not registered and the computer won't recognize my device.  How do I fix this

    I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed.  Now it's not registered and the computer won't recognize my device.  How do I fix this?

    iPod not recognized in 'My Computer' and in iTunes for Windows
    Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

  • Computer won't recognize network printer - HP OJ Pro 8600

    My computer and printer are both connected to the same wireless network, but my computer won't recognize the printer (using the host name, IP address, or otherwise).  It's maddening, because it worked when I first set it up a year ago and just recently stopped - I uninstalled and reinstalled everything.  My iPhone can pick up the printer and print wirelessly, but there's an issue when I try to connect my computer using the HP software.

    Hi @petersaaron , and welcome to the HP Forums!
    I understand you're having issues utilizing your printer from your computer. I would like to the help with that!
    I would recommend starting with a power reset.   Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • IMOVIE 6 won't recognize DV camera while IDVD is encoding or burning

    I am in the process of encoding and burning a dvd in idvd 6. Given the length of this process, I want to also import some video into an imovie 6 project. However, while idvd is encoding, imovie won't recognize my camera.
    I understand I can stop idvd, but then will I lose the encoding that has already occurred?
    Will imove recognize the camera if I launch idvd after beginning the import into imovie?
    Is there a software fix that will prevent idvd from monopolizing the firewire port when it is just encoding video from an imovie project?
    This is a very irritating conflict given the time encoding takes in idvd.
    Thanks,
    Knapper
    Dual 1 GHz PowerPC G4   Mac OS X (10.4.5)  

    As Sue suggests, it's not surprising that iDVD doesn't want you to access the camera with iMovie. It's not unusual for applications that perform FireWire-intensive functions—as both iDVD and iMovie do—to want to control the device. If iDVD can't control the camera, it may not be able to perform a task you want it to do. (Remember, iDVD offers several camcorder-dependent functions, including OneStep DVDs.)
    While it may be a bit treacherous, you CAN go behind iDVD's back to get it done. The trick is to grab control of the camera before iDVD does. So Quit iDVD after you create, then save the iDVD project, then grab control of the camera with an iMovie HD project, THEN re-open the iDVD project and start encoding. (I tested exporting the iDVD project to a disk image, which is probably safer than burning a physical DVD. Use Disk Utility later to burn the disk image to a physical DVD.)
    The iMovie video looked fine here, but your mileage may vary.
    Karl

  • Ipod shows folder with exclamation point and computer won't recognize

    My ipod resets itself each time that I try to turn it on, and then flashes the folder with the exclamation point. I have tried to restore it and update software but the computer won't recognize it. A few days before it broke the ipod would skip through some songs that it was unable to play for some reason, and now it makes a clicking sound when trying to start up. Did it die, or is there a way to fix this?

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
    http://www.kokopellimusic.us/KM_instructions.htm
    Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • My Windows7 computer won't recognize my iPhone4.  I've tried all the help tactics.... HELP!

    My Windows7 computer won't recognize my iPhone4.  I've tried all the help tactics.... HELP!

    When you say you have tried all the help tactics I assume you have tried all the things mentioned here
    http://support.apple.com/kb/TS1538

  • Storage space full of "other", computer won't recognize iPod is plugged in

    I just downloaded about 100 songs onto my 160 gigabyte iPod Video Classic, making my number of songs only about 1,300. My iPod says its storage now only has 1.9 mb left. I only have about 10 videos and no photos, but the "other" section of the storage content bar takes up a ton of space. It had none before. How do I remove the "other" from my iPod? Now my computer won't recognize any iPod when I plug it in, and I've tried multiple plugs.

    Connect the iPod to a USB2.0  port, on the Computer itself and not a USB hub or those found on the Apple keyboard.
    If iTunes launch, close it back.
    If your iPod is found on your Desktop, then run DiskUtility, (if not then Reset the iPod while connected to the Mac)
    Select you iPod
    Click FirstAid Tab on the right window.
    Press the Repair button.
    After Repair finish, iTunes may launch and ask to Restore, this will delete all the data in your iPod.
    if iTunes did not launch, just Reset iPod again while connected to your Mac.
    Always don't use USB hub or the Keyboard USB port or else your problem will come back, as the power is insufficient from these shared ports for iPod harddisk write process.
    Good Luck!

  • TS1382 IPOD Classic "clicking" sound - computer won't recognize it now

    IPOD Classic. Was transferring files from iTunes and started hearing a "clicking" sound from iPod. Tried to disconnect. Computer said safe to do so but iPod screen never said ok. iTunes and computer won't recognize it now.Is clicking a hard drive failure? Also when I try to turn it on all I get is the "go to apple support url". Can`t get to any menu screen.

    Thanks...it sounded like that from other things I read. Appreciate the response.

  • My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

    My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

    If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
    If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
    PC : http://support.apple.com/kb/TS1538
    Mac : http://support.apple.com/kb/TS1591

Maybe you are looking for