My computer won't recognize my Zen Micro....

Just recently, my computer stopped recognizing my Zen Micro. The battery icon on the screen shows that it's attempting to charge, although it takes forever (it took all weekend to give me just 2 bars) to do this. Windows Media Player tells me there are no devices connected, so I'm unable to add my new songs to my player. I know it's not my computer or USB port, because my girlfriends Ipod is working fine. At first I thought it might be my battery, so I bought a?new one and I'm still having the same problem.
If anyone can point me in the right direction to get this fixed, I would greatly appreciate it. Thank you!

0Re: My computer won't recognize my Zen Micro....
cgeringer wrote:
Just recently, my computer stopped recognizing my Zen Micro. The battery icon on the screen shows that it's attempting to charge, although it takes forever (it took all weekend to give me just 2 bars) to do this. Windows Media Player tells me there are no devices connected, so I'm unable to add my new songs to my player. I know it's not my computer or USB port, because my girlfriends Ipod is working fine. At first I thought it might be my battery, so I bought a?new one and I'm still having the same problem.
If anyone can point me in the right direction to get this fixed, I would greatly appreciate it. Thank you!
You may need a new battery? http://www.thegadgetdr.com/Zen-Micro...zm-battery.htm? & a wall charger? http://cgi.ebay.com/TRAVEL-AC-CHARGER-POWER-ADAPTER-FOR-CREATIVE-ZEN-MICRO_W0QQitemZ2037204785QQcmdZViewItemQQptZOther_ MP3_Player_Accessories?hash=item2037204785&_trksid =p3286.c0.m4&_trkparms=72%3A234|66%3A2|65%3A2|39%3 A|240%3A38|30%3A0|293%3A|294%3A50 ? & do a Cleanup > reboot on the player but you need a fully charged battery to do that. http://forums.creative.com/creativel...ap&thread.id=3

Similar Messages

Creative MediaSource won't recognize my Zen Micro all of the sudden!! What is going o

When I first began using my Zen Micro, Creative MediaSource worked fine. I could start my player and it recognized it right away. Then I was told I had to update my firmware and download an update to MediaSource. I did both but shortly thereafter I started having problems! Primarily, when i plug in my Micro a window pops up where I have 3 options, none of which are Creative MediaSource. The window has "MTP Media Player" across the top bar, but i havn't a clue what the "MTP" stands for. The 3 options given are "Sync your music using Napster", "Synchronize media files to this device using Windows Media Player", and "Take no action". I initialy tried "Take no action" and then opened MediaSource only to find it didn't recognize my Micro any more. I then e-mailed Creative for help and got a reply telling me to.............
Thank you for contacting Creative Technical Support.
In regards to your issue, you can try uninstall and reinstall
MEdiaSource with these procedures.
. Click START -> RUN -> type MSCONFIG and click OK.
2. Click SELECTIVE STARTUP and then uncheck LOAD STARTUP GROUP ITEMS.
3. Apply the changes and reboot the computer when prompted.
4. Uninstall MediaSource from the system using ADD/REMOVE PROGRAMS.
5. Manually delete the MediaSource folders from the computer system :
C:\PROGRAM FILES\CREATIVE\MEDIASOURCE
C:\PROGRAM FILES\CREATIVE\CTCDDB
C:\PROGRAM FILES\CREATIVE\MEDIA MANAGER
C:\MEDIA\MUSIC
6. Right-click your My Computer icon and click Properties.
7. Click the Hardware tab and then click Device Manager.
8. Remove any listings for Creative NOMAD products in the Device
Manager
(they will most likely be located in the Uni'versal Serial Bus
Controllers category).
9. If you have a category call Other Devices, look for listings in
there
called USB Device. If you have any, remove them.
0. Install MediaSource only from the original installation CD.
NOTE: DO NOT OPEN MEDIASOURCE WHILE PERFORMING THESE PROCEDURES.
Also, you can try reloading the Zen Micro's firmware through recovery
mode.
Move and hold the Power button to the Power On position and re-insert
the battery to the Zen Micro. Hold the Power button until the rescue
mode appears.
Clean Up: Performs a disk scan on the players hard disk
Format: Formats the players hard disk All contents will be lost
Reload OS: Reloads the Operating System on the Jukebox. Do not select
this option unless you have downloaded the firmware. Reloading your OS
will not effect the contents of the files stored on your Jukebox Zen
Reboot: Reboots the device
Please attempt the options 'Reboot' and 'Clean Up' first. If they do
not
help, you must try 'Reload OS'. To do this, you must have a downloaded
firmware from our website ready. Please let us know the results after
these steps, as soon as possible.
For faster service please reply with previous correspondence when
replying to this email.
Best Regards,
Technical Support
Creative Labs Americas
"Get Creative"
I followed the directions, but 3 of the folders listed in step 5 didn?t exist (only C:\PROGRAM FILES\CREATIVE\MEDIASOURCE did), there were no Creative NOMAD products listed as in step 8, and there was no ?Other Devices? as stated in step 9. I did everything else for all the steps through step 0.
I then re-installed Creative MediaSource from the CD only to find it still didn?t recognize my player! I?ve now done this twice with the same results!
Zen Micro Media Explorer doesn?t even recognize my Micro when it'ss plugged in! It just keeps saying ?The device is not connected. Please connect your Zen Micro to the computer?.
I?m hardly a tech expert, but it seems to me that something on my PC is detecting my player and decieding for itself that the only 2 programs it will let manage my Zen Micro are Napster and Windows Media Player. If this is the case where do I go from here?!?!
Moderator Note: Removed the name of the Email Advisor. Please do this in the future when posting email responses from Creative.Message Edited by Jason-CL on 07-2-2005 02:05 PM

LakeTahoeGuy,
Just as SSR mention, if you're using v2.xx.xx (MTP) firmware then you will need to get the correct version of Media Explorer that support this firmware and also install the MTP plugin for MediaSource. Both the software and plugin are available from the site SSR mention.
Jason

My computer won't recognize the zen sleek ph

I have installed the software and when I open the program it won't recognize that my product is plugged into the computer, therefore I can't use it or upload music to my product. I have tried turning off my anti-virus programs and re-installing the program but it still isn't helping. I don't know what to do. Please somebody help me!

gosh, i'm not the only one.. i have a similar problem with my zen xtra and i posted this message three times in three different places with people having the same problem (!!).. the system recognizes the mp3 player, the drivers are installed, but the file manager says it's not connected and i can't add music. i tried to reload the os but it was a big mistake because i deleted it and i have to install a firmware update. but how can i do it, if it says not connected?

"My Computer" won't recognize my Zen V P

Everything else works fine with it, but I can't get files out to change their names anymore.

I installed it again to no success. I'm using WMP 0, that came with the CD.
The driver wouldn't install as I've not got SP2 running yet, but I'm sure I installed it not so long ago on my zen. Would the connecting problem be caused by that also?Message Edited by marklcfc on 08-03-2006 04:08 PMMessage Edited by marklcfc on 08-03-2006 04:08 PM

Computer won't recognize and there is no firmware load

Computer won't recognize my Zen Xtra and there is no firmware loaded cause I tried to update the firmware and it failed!

If it's out of guarantee try the battery clip reconnect here. http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/PlayBook-Turn-on-but-won-t-charge/m-p/192...

Computer won't recognize my 6GB Creative Zen Mi

I have tried all night to try to get my Creative Zen Micro up and running. I recently lost all my songs and it started back up and running again except the computer won't recognize my device. What should I do? I just want to add all my songs back but it won't read it. What is going on?

newmanm wrote:
I'm running Windows XP SP2 and the firmware on the Zen is .02.05 (which is what came installed).
Is the player still showing this firmware? I assume you can boot it normally, if so check System > Information just to be sure.
When you connect the player to the PC, what's showing in Device Manager? Is the player listed without error and with a driver version?

Computer won't recognize Zen V plu

The same thing happened about a month ago, the computer won't recognize my 2gb zen v plus.. Then I just reinstalled the programs, and everything was normal. It recharges my player normally, but I can't add any songs, videos, pictures etc. The player hasn't fallen down or anything. It's about 6 months old (bought in October. When I open My Computer, there isn't even a removable disc or sth. So, could anyone give me some advise?

When I purchased my Sleek Photo last spring, I had the exact same problem. My PC via Windows Update was up to date, and I knew it wasn't my hardware, USB drivers, etc. as I have another player (a Rio) that worked fine. I found this thread, and followed what the poster <EM>DM</EM> had said. This worked perfectly, make sure you follow the directions, and see if your PC is compatable with DM's fix. I hope this hel
ps.
http://forums.creative.com/creativel...id=3682#M30748Message Edited by Tony3 on 09-0-2006 0:07 AM

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this?

iPod not recognized in 'My Computer' and in iTunes for Windows
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

Computer won't recognize network printer - HP OJ Pro 8600

My computer and printer are both connected to the same wireless network, but my computer won't recognize the printer (using the host name, IP address, or otherwise). It's maddening, because it worked when I first set it up a year ago and just recently stopped - I uninstalled and reinstalled everything. My iPhone can pick up the printer and print wirelessly, but there's an issue when I try to connect my computer using the HP software.

Hi @petersaaron , and welcome to the HP Forums!
I understand you're having issues utilizing your printer from your computer. I would like to the help with that!
I would recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Ipod shows folder with exclamation point and computer won't recognize

My ipod resets itself each time that I try to turn it on, and then flashes the folder with the exclamation point. I have tried to restore it and update software but the computer won't recognize it. A few days before it broke the ipod would skip through some songs that it was unable to play for some reason, and now it makes a clicking sound when trying to start up. Did it die, or is there a way to fix this?

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

My Windows7 computer won't recognize my iPhone4. I've tried all the help tactics.... HELP!

My Windows7 computer won't recognize my iPhone4. I've tried all the help tactics.... HELP!

When you say you have tried all the help tactics I assume you have tried all the things mentioned here
http://support.apple.com/kb/TS1538

Storage space full of "other", computer won't recognize iPod is plugged in

I just downloaded about 100 songs onto my 160 gigabyte iPod Video Classic, making my number of songs only about 1,300. My iPod says its storage now only has 1.9 mb left. I only have about 10 videos and no photos, but the "other" section of the storage content bar takes up a ton of space. It had none before. How do I remove the "other" from my iPod? Now my computer won't recognize any iPod when I plug it in, and I've tried multiple plugs.

Connect the iPod to a USB2.0 port, on the Computer itself and not a USB hub or those found on the Apple keyboard.
If iTunes launch, close it back.
If your iPod is found on your Desktop, then run DiskUtility, (if not then Reset the iPod while connected to the Mac)
Select you iPod
Click FirstAid Tab on the right window.
Press the Repair button.
After Repair finish, iTunes may launch and ask to Restore, this will delete all the data in your iPod.
if iTunes did not launch, just Reset iPod again while connected to your Mac.
Always don't use USB hub or the Keyboard USB port or else your problem will come back, as the power is insufficient from these shared ports for iPod harddisk write process.
Good Luck!

TS1382 IPOD Classic "clicking" sound - computer won't recognize it now

IPOD Classic. Was transferring files from iTunes and started hearing a "clicking" sound from iPod. Tried to disconnect. Computer said safe to do so but iPod screen never said ok. iTunes and computer won't recognize it now.Is clicking a hard drive failure? Also when I try to turn it on all I get is the "go to apple support url". Can`t get to any menu screen.

Thanks...it sounded like that from other things I read. Appreciate the response.

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591

Computer won't recognize ipod and ipod flases foler with exclamation point

Last week, my computer randomly said it did not recognize my ipod. I continued to use it and figured I'd worry about updating it another time. Then today, I was using my nano and it stopped and flashed the folder with the exclamation point icon and below the icon directed my to Apple's support website. I've tried most of the things I've seen in the forums, and I really have no clue what to do. Everytime I try to turn it on, the icon comes up and everytime I try to connect to iTunes my computer won't recognize it.

rfletche,
Just confirming... have you seen these articles?
iPod displays a folder icon with an exclamation point
iPod displays a sad iPod icon
Also, see this post by Mitch 751, a user on these Discussions, which details some things to try with an exclamation point and folder symbol on an iPod:
Mitch: Exclamation point and folder and nothing else
-Kylene

My computer won't recognize my Zen Micro....

Similar Messages

Maybe you are looking for