My Computer won't start, and Disk Repair says to backup files?

I am not able to start the computer without the install disc, and I know no ways to backup my files from the install disc and restoring isn't really an option right now because I really need to keep the files on my computer. If someone could help it would be much appreciated.

Try this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Similar Messages

My mac desktop computer won't start and just beebs

My mac desktop computer won't start it just beens loudly. I don't have any lights showing on the keyboard but can hear the drive switching on. I have unplugged the computer, waited and replugged and waited and then turned it on again without and results. Please help.

Use this tip to identify your Mac:
https://discussions.apple.com/docs/DOC-6413
If indeed it has a PowerPC processor (the PowerMacs use that, and have been around since early 2006 simultaneously with some of the Intels), see this tip on beeps:
Power On Self-Test Beep Definition - Part 2
If it is Intel, see this tip:
Mac computers: About startup tones

Computer won't start and light just flashes as if in sleep mode. Does not even make the start chime. displays remain dark.

Computer won't start. sounds like it makes an attempt at accessing a hard drive. but then just goes to sleep. no start up noise. no displays come on.

Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Computer won't start and other problems

Recently I've noticed my computer getting slower and slower (including during startup). Today it failed to startup. Sometimes when starting up it'll be a blank grey screen and then I'll restart it and it'll go to the Apple logo with the spinning progress circle but stay on that forever. I started it up on the install disc and went to disk utility and it stuck on the "gathering disk information" and never got beyond that. Any idea what I can do?
iBook G4 Mac OS X (10.3.9)

I'm wondering if this could be a hard drive going bad. I don't really know if a failing hard drive could show these symptoms. However, your experience with Disk Utility being stuck on "gathering disk information" makes me wonder.
One test that you could do would be to use the Startup Manager to try to see if your hard drive shows up. To invoke the Startup Manager, you need to hold down the option key while you restart. After a bit, the system should display the disks (or volumes) from which you will be allowed to startup. The link has more detailed information.
If your hard drive does not show up as one of the available startup volumes, that could be consistent with a bad hard drive. I am not sure that would be the only explanation, though. If your hard drive shows up, select it and see if you can boot from it.
EMAC G4 1.0 GHz Mac OS X (10.4.6)

So, my computer won't start, and it's from August 2007

So, I was on my Macbook earlier, and it froze up. I couldn't force quit anything and then I turned it on and it was a bank gray screen. I can hear the fan and the hard drive and everything, which you've heard before. I got this thing in August 2007, and from the 15 posts I read, it sounds like I have the hard drive failure thing that people have talked about before, and linked to this: http://www.macsimumnews.com/index.php/archive/macosgmacbook_seagate_hard_drives_catastrophicallyfailing
So, my question is: will this be covered by the basic warranty I got when I brought it, or will I need to replace my harddrive out of pocket. If I do need to replace it, how much is this gonna cost me?
Thanks.

This just happened to my MacBook, and it's also from August 2007. I have an appointment to take it in on Wednesday, May 28.

Firmware update progress bar appears and computer won't start up

Hi,
I am on OS X 10.6 (the latest developer build, whose build number I can't remember and can't look up because my computer won't start up) and this morning when I tried to start up my computer, it chimed, the apple appeared but then a grey progress bar (like the one that appears during a firmware update) appeared at the bottom of the screen along with the customary spinner. This progress bar didn't update and after 10-ish seconds, it disappeared and left just the spinner. I left the computer in this state for 4 hours and nothing happened. It still starts up in single user mode (but I can't seem to get Open Firmware mode to load) and it starts Windows XP on another partition of my main HD.
When I start it in verbose mode, it says that my catalog B-tree has keys out of order and it is unable to repair them. Also, I get an error message from launchctl: "Bug: launchctl.c:2033 (23930):17: auditquickstart() == 0". Then later on it tells me to convert a few system plist files to launchd (all in the /etc/mach_init.d/ folder). The very last line says "launch_msg(): Socket is not connected".
I would rather not re-install the system, but if I have to, I guess I will. I appreciate any light that anyone can shed on this problem.
Thanks,
Kyle

Yes, they (the third-party utilities) both come on bootable DVD's. As I mentioned, since Snow Leopard was just released in its final version, the developers may be in the process of releasing updates.
Your situation is likely to be a case where the data corruption issue already existed before installing Snow Leopard, and the installation process made the problem more apparent (because something critical was installed where it was affected by the data issue).
It is a good idea to run +Repair Disk+ in Disk Utility on the startup volume before installing a major system update. Actually, I do it before any system-level update.
You should also have a backup (at least of your personal data if not the entire volume), in case something bad happens during a major system upgrade. If you were using Time Machine, the easiest recovery would be to reformat the internal drive and use the Time Machine complete volume restore utility to restore the volume back to the date/time state just before you installed Snow Leopard. Then, after restarting from that restored volume to make sure everything is working, start up from the Snow Leopard installation disc, run Disk Utility and use +Repair Disk+ (just to be sure), and run the upgrade to Snow Leopard again.
If you have a backup of at least your personal data, you may want to reformat the internal drive, install Snow Leopard and bundled apps, install your third-party apps from their original sources, update everything that needs updating, and restore your personal data.
If you don't have a backup, the best bet is to try either DiskWarrior or TechTool Pro. DiskWarrior is very specialized into repairing this type of data problem. TechTool Pro has similar capability, but it is a more general tool with other features.

Mountain Lion update, and now computer won't start up?

Writing this for a friend, as his computer is inop at the moment. Hence this message.
He has a new 27" iMac. He upgraded to Mountain Lion a few weeks ago, and then had intermittent problems with apps unexpectantly shutting down.
Now he did a ML update this morning, and his computer won't start up. It gets to the point of the Apple logo coming up, a progress bar, and then the spinning wheel, but then shuts itself down right afterwards.
A safe boot yields the exact same result.
Any thoughts out there on what he could try to get it up and running again?
Thanks much for any and all help.

Thank you for the fast response.
He was able to get into Disk Utility with the Command and R keys, but when he tried verifying the disk, in red it said 'Invalid Node Structure, volume could not be verified completely'.
He went ahead and verified it anyway, then proceeded to repair it. Howver, it stopped repairing, said it cannot repair, and that he should back up files and reformat the disk.
How can he back up his files? He cannot see a way to do it. Is there anything else he can do besides having to reformat the disk?
This is his first Mac (after much prompting from me to go Mac), and he's afraid he's now lost everything on there.

Computer won't start from hard drive or CD, and won't perform system recovery.

I have an HP Pavilion g7-1314nr. Yesterday it froze and I held down the power button to turn it off. After turning it back on, it started a disk check. I turned it off during the disk check, and upon trying to boot it back up, it told me booting failed and to press CTRL-ALT-DELETE to try again. After multiple attempts, it stopped displaying this message. Under system diagnostics, I ran a boot test, and it failed. Attempting a system recovery brings up the start-up windows logo, and then a black screen with an enlarged cursor. This morning, I inserted a recovery disk and told it to boot from internal CD/DVD drive. Like system recovery, it brings the Windows logo, and then a black screen with an enlarged cursor. My computer is incapable of booting from either the hard drive or a CD. What do I do?

Hi @TeridaxXD001 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g7-1314nr Notebook and issues with Windows 7 and starting up. I recommend to restore the BIOS defaults. You could restore the BIOS with this document selecting the reloading the BIOS default settings which should resolve the fan issue.
Here is a link to computer won't start for Windows 7. There is a section on getting past the HP Logo screen.
If that does not help at the end of the document it shows you to do a hardware test.
Please note remove any and all USB devices before troubleshooting. Disconnect all non-essential devices
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Start up problem and Disk Repair failed...

I recently did an update on firefox and an update on adobe flash. Right after I did those updates, I turned off my computer and couldn't restart!!!
First time I tried to boot, I got to the apple icon with wheels around it. But it just set there like that for several minutes. So I forced it to shot down.
After that, every time I tried to restart I came to a grey screen with a small folder appeared in the center and a flashing question mark...
I then followed instructions in this link: http://support.apple.com/kb/TS1417
It failed to safe boot and disk repair.
I received the following message while doing the disk repair:
"First Aid failed. Disk Utility stopped repairing disk3 because the following error was encountered. The underlying task reported failure on exit."
"Repairing disk for disk3
checking HFS Plus Volume
Catalog file entry not found for extent
Volume check failed
Error: The underlying task reported failure on exit (-9972)
Repair attempted on 1 volume
0 HFS volumes repaired
1 volume could not be repaired"
Can this G5 still survive without changing a HD? Could you please help on this issue? Many many many many thanks!!!

If it's just data corruption, erasing the drive will fix the issue. If it's a physical problem with the drive, then no; you will have to replace the drive.
The next thing to try is starting up from your Mac OS X installation disc (for the currently installed system release); insert disc and restart while holding down the C key.
When you get to the first Installer screen, go up to the menu bar and select to run Disk Utility from the Utilities menu. In the sidebar, select the internal drive; select the drive and not the volume indented under the drive. Go to the Erase tab. Name the volume +Macintosh HD+ and set the format type to +Mac OS Extended (Journaled)+. Then erase, which will re-partition and reformat the drive. This will obviously erase any existing data on the drive.
If the drive is physically OK, this process should complete in less than one minute. If it does, quit Disk Utility to go back to Installer. Run a standard installation on the blank drive.
If the erase process errors out or stalls, you probably have a faulty hard drive.
If the erase process completes successfully, but the subsequent Mac OS X installation stalls (or takes forever) or fails with error, please post back.

My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

TS1717 My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer

My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer.

Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562

HELP! Battery drained and now, even with a power plug, computer won't start

My battery drained completely...and I went to charge it. When I plug the power cord in, it shows "green" not "red." When I remove the battery and just plug in the power cord, the computer won't start either.
Anyone encounter this before after a full battery drain? It's very odd.

I had the same green light non-charging problem. Turns out, I had to replace my wall adaptor. A dealer will have a good power supply you can try.
Wayne

What does a file folder with a question mark in it mean when the computer won't start?

What does a file folder with a question mark in it mean when the computer won't start?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(68976)

Help, computer won't start up

Help, my computer won't start-up now. I downloaded one of those free .swf converter softwares from the net and now I think in the restart process, which should've completed the download like it said, instead it's like I don't have any OS on my computer anymore. And if that doesn't make things worse I was trying to reinstall OS X and it wants to go the net to do that but when i try to it asked my to login to the apple store with the ID i purshased it with and I didn't buy it I downloaded it from a P2P site, so of course the apple store tells me when i login to login with the ID I bought it with so now what, I don't want to lose my file's what should I do anybody got any suggestion. This is what I tried so far.
When it starts up I see the OS X Utilities window
I clicked the the Disk Utility, and clicked my HD and clicked repair.
When it was done it said
The volume appears to be ok.
Volume repair complete.
Updating boot support partitions for the volume as required.
Now what, also I did it again after I held CMD + R
Still when I start up I don't see my hard drive just the OS X Utilities window.
Also when I downloaded the OS X 10.8.5 I saved it on an external but its plugged to my only computer and thats the one I'm having the trouble with, sorry about all the miss spelled words if you can read this and help please do...

Try booting from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

My computer won't start up after i tried to install updates

last night my computer told me there were 5 new updates available and i tried to install them, and my computer froze so i manually turned it off. now my computer won't start up. i get to the gray screen with the apple and the circular icon that swirls around which makes you think it's doing something but nothing happens. in the hopes that my computer was loading the updates, i let it run all night, and 8 hours later it was still doing the same thing. now my computer won't start at all, and i know there's power to it.
HELP!!!!!!!!!!!!!!!

chiae:
am i looking for the Leopard installer or the disc that came with my Powerbook all those years ago?
You are looking for the installer disk for the system which is currently installed on your computer, which is Leopard according to your profile.
Will doing these steps erase my hard drive?
No. Running Repair Disk will not in any way affect your data or any contents of your HDD. However, if there are serious directory issues your data might be jeopardized even without running Repair Disk.
Your question suggests that you may not have an up-to-date backup, if any backup at all. That is one of the most dangerous things you can do. I suggest that you take steps to secure your data even before you do much more. If you need ideas on how best to accomplish this, please post back and ask.
While you are waiting to locate your install disk, here is something you can do right now, and it will not in any way endanger the contents of your HDD:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
Please do post back with an update or with further questions or comments.
Good luck.
cornelius

My Computer won't start, and Disk Repair says to backup files?

Similar Messages

Maybe you are looking for