My contact app on iPad 2 doesn't launch, does anyone know how to fix it?
Hey guys,
I can't launch the contacs app niether can open the mail, contact, calender on settings.
does anyone know how to fix it?
Thanks
Don't mention it,
I have a few solutions for you,
First, is to do a reset. Ou can do this by going to Settings > General > scroll all the way down and select Reset. From there you can select either to reset just the settings, or erase everything and reset the settings as well. I recommend you to erase everything and reset the settings if it doesn't bother you too much.
Second, is to check to see if your restrictions aren't messed up.
Third and last solution is to plug your iPad to the computer and restore the firmware.
Hope it helps!
Similar Messages
-
ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?
Welcome to the Apple community.
Unfortunately Office for Mac does not support the correct protocols to work with iCloud. -
I am trying to hook my iPad up to my TV so I can watch netflix on it, however, when i hook the AV cable up i get a message that says "no volume available." my iPad is not muted, does anyone know how to fix this problem?
Read this link and it may provide some help: https://discussions.apple.com/message/15460209#15460209
-
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)
I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.
-
I keep getting this error message when updating imovie "There was an error in the App Store. Please try again later. (20). Does anyone know how to fix?
If you're having problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
OT -
My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini
I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777 -
My wishlist is not working in the app store on my ipad it is woking fine in itunes store so i can add films and music but the icon "add to wish list" is not available on the app store so does anyone know how to fix this
The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
I just got a new white iphone 4. When I try to take a video using the camera app, there is only a muffled sound. I never had this problem with my old iphone. I tried to restore it and that didn't help. I checked over all of the settings. Does anyone know how to fix this?? Thanks for any help you can offer!
There is a good possibility that your trimming of the SIM card could have damaged it some way. If the SIM was working in the old phone, then you cut it and the first new phone didn't work and now this phone doesn't work, it leads me to believe it has to do with the SIM card or the account. You are sure there is no problem with the account. Did you check with the provider when you got the iPhone 4 to make sure there was no problem with the account when you could not send or receive SMS? Why can't you just get a micro-sim? The iPhone should have come with one when you purchased it.The iPhone 4 is designed for a micro-sim. I don't believe this is a hardware problem unless the phone has been hacked or modified in some manner.
-
I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?
You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme. -
Hi, I have been watching videos from my ipad via ATV2 with no problems for over a year. As of yesterday my videos just keep loading and don't play. I don't think I have done anything differently. Does anyone know how to fix this. I have tried unplugging it waiting 30secs and then plugging it back in. I have tried restarting, updating and reseting but nothing is working. It's quite frustrating!!!! Any suggestions????
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I have an App icon that doesnt appear although it is definitely installed. Does anyone know how to fix this?
thx
WarrenWelcome to the Apple Community.
Try using the search feature for the app. If that doesn't help, restart the device.
How do you know it's definately installed. -
Error-600 keeps appearing when I try to launch creative cloud installer- does anyone know how to fix this? osx 10.9.2
help is greatly appreciatedWelcome to Adobe Forum,
If there is no billing issue, then I would like to mention that
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
Windows:
In windows 7 navigate to following location:
/windows/system32/drivers/etc
1. look out for "Hosts" file
2. Open it with notepad
3. Check if you have any entry for Adobe
4. Remove the entries and try again launching any product from CC
Mac:
1. Please click on "Go" and navigate to /private/etc
2. Open "hosts" file and check out for any entries for Adobe.com
3. Remove the entries and save the file
4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Please let us know if it worked.
Regards,
Rajshree -
I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?
HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway. -
My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.
Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.
Maybe you are looking for
-
Open application windows in the same place consistently
Hello, I am hoping to find out if anyone knows of a good way to convince application windows to open in the same location on the screen every time, consistently. This is, clearly, a minor problem, but perhaps you know how to do it. For example, I ten
-
Importing mifs into RoboHelp imports Nothing
Using FrameMaker 7 and RoboHelp 8 - I import regularly (create new project, import frame docs as mifs) and an empty RoboHelp project with NO framemaker docs is created. Someone else has GOT to have had this issue, as it occurs occasionally on my mach
-
SQL*Plus COPY command does not work
SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP. copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name> Does it work on different ve
-
Newbie: How to select into a char pointer in Pro*C?
All Pro*C samples I have seen selects a VARCHAR2 column into a host char array. I want to used a char * instead. However, each time I run the program after successful Pro*C and C compilation, I get a critical error. Can someone share some working cod
-
XMLP Bursting - Naming files that are generated
Hi, We are using XMLP 5.6.2 burstingEngine process to generate output pdfs using single input xml(generated in batch mode) data file and rtf template. We are generating the output files to filesystem using the following attribute in control xml file.