My contact phone numbers are no longer formatted and texts come from numbers instead of people.  What gives?

All of a sudden all of my contacts as displayed on my iPhone have lost their formatting.  So the numbers all read as 1234567890 instead of (123) 456-7890.  And, what's worse, is when I go to the texting app, all of my texts are still there, but instead of showing me the contact name, all I see are the unformatted phone numbers of where they came from.
Any ideas on why?  It's a Verizon iPhone 4S.  This lack of formatting is not showing up on my Mac nor my iPad.  Would a re-sync fix this?  I'd hate to have a re-sync screw up the info on my computer and pad, though...
Rock

I too am having the same problem, and use the *228 then killing all my open apps solution to bring my numbers back to the correct format.  However, as just a one time fix, I keep on getting the same problem again after a few weeks, and last week, after a few days of doing the *228 fix.  Does anyone know what is causing this problem on Verizon iPhones?  As a point of information, I was previously on AT&T with my iPhones until my wife transferrred me over to Verizon (on her business account because she wanted to surprise me with a new iPhone 4S).

Similar Messages

  • TS2755 Messaging displays contact phone numbers instead of contact names.

    My Messaging displays contact phone numbers instead of contact names.  This just started happening and I do not recall changing any settings. How do I restore to display contact names again?

    Make sure the numbers are assigned to a contact.

  • How do I get my contact phone numbers to format properly?

    I just upgraded to an iPhone 4S on Verizon.  The majority of my contact phone numbers are now in the format: 1234567890.  On my old iPhone 4 (AT&T) they were displayed as (123) 456-7890.
    This is causing several problems.
    When I try to dial from contacts, Verizon keeps insisting the numbers are international, and I don't have international service.
    When a call from a contact comes in, it shows the number, not the name (it cannot correlate the caller ID number with the name in my contact list).  The same with text messages.
    I cannot get Siri to dial any of these contacts.
    I am syncing via iCloud, and was on my last phone.  In Address Book on my Macintosh the numbers are formatted properly, and show as US numbers.
    I've searched through settings, but I don't see any way to change how Contacts on the iPhone displays numbers.
    Is there some way to convince my phone that these are US numbers, format them correctly, and stop giving me trouble dialing them please?

    I had this problem also and did the same thing. I dialed *228, chose option 1 and it worked. My question is that my phone, which is a 4S and on Verizon, is the only iPhone I've ever had. The format of my numbers just changed. I didn't realize it until I noticed that I was getting calls from people on my contact list and the number, not the name, was coming up. Is there a reason that this happened? I'd like to know in case it was something I did so I can be sure not to do it again.

  • I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

  • Text messages come up as phone numbers instead of names - even though they're in my contacts.

    i updated my 4S from iOS 5 to iOS 5.0.1 and all of my contacts transferred, but now all of my text messages come up as phone numbers instead of names - even though they're in my contacts.

    Hi,
    I take it these are iMessages contacts ?
    Are you using iCloud to Sync your Contacts apps info ?
    In Messages > Preferences > Accounts > Details Button (You will need to sign in again) do you have the correct Country/Region set ?
    This can effect the adding of the correct Country Code prefix to your own number and distort the coming form the Contacts app if the number there don't include a Country Code.
    9:12 pm      Wednesday; July 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Contact phone numbers show instead of contact names on my iPad in text messages etc. How do I change it so their names show

    contact phone numbers show instead of contact names on my iPad , text messages etc. How do I change it so their names show

    Did you change your sim card? I had this same problem because I moved countries and had to add a 1 before the number and area code.

  • Contact phone numbers show instead of contact names in phone favorites, text messages etc. How do I change it so their names show

    contact phone numbers show instead of contact names in phone favorites, text messages etc. How do I change it so their names show

    Did you change your sim card? I had this same problem because I moved countries and had to add a 1 before the number and area code.

  • Back up Assistant lost all my business contact phone numbers

    Saturday My Droid 3 that had already been difficult to use because it would not keep a new phone contact and would freeze in emergencies (I am talking get an ambulance, input a doctor's number while standing in the emergency room, or in business meetings, occasions like that) started losing the screen, it would go black if I opened the keyboard and then freeze with a black screen, continuously. It would not respond to attempts to turn it off. I took out the battery for a minute and put it back in and rebooted only to have the same thing happen over and over if I tried to use an app, make a call, view picture gallery, whatever. So I took my phone to the Oklahoma City, OK Verizon Wireless Store #331769 for CUSTOMER SERVICE. I showed the sales people my frozen black screen phone and that the back was broken and was being held on only at the top and by the neoprene case. They took the battery out and  put it back in and declared my problem solved and told me that my phone was like a computer and needed to be turned off once a day and kept charged. I assured them that I was aware of this and that I did turn it off and let it reset and I charged it up every night and sometimes in the day as needed. The FIRST SOLUTION was to reformat the phone which WIPED ALL INFORMATION AND APPS OFF OF MY PHONE. I let them do that and they sent me home with it to replace all my information and apps.
    Now I come to find that ALL MY BUSINESS CONTACT PHONE NUMBERS ARE MISSING from using Back Up Assistant. This is critical for my work!
    ALL CONTACT INFORMATION was missing on my online account! Why would that happen? I will synch what is left on my phone to my BACK UP ASSISTANT account online.
    I still haven't transferred the sim card to my "replacement phone". How can I insure that I don't lose all my contact information again???
    I am going to Verizon Wireless Store #331769 for CUSTOMER SERVICE directly after work. If they lose my business contact information and phone numbers, I will be forced to re-enter 200+ contacts before I leave to go out of state for work tomorrow..
    Any suggestions for a positive result?
    THE CUSTOMER SERVICE GIFT THAT KEEPS ON GIVING. I CAN'T BELIEVE THIS!

        Hello Drucatic
    I'm sorry you were not able to get the contacts back. I know how irritating it would be to reload all those contacts.Were the contacts synced with the Gmail account? Please try backing it up with Gmail. Are you able to log in online  at www.verizonwireless.com/myverizon ?If so, Please log in and check the trash the contacts may of accidently been moved.
    Thank you
    JoeL_VZW
    Please follow us on twitter @vzwsupport

  • If I activate iCloud on MBAir do I lose contacts/phone numbers on my iMac running Snow Leopard?

    I have a new iPhone and wanted to activate iCloud from my MB Air, but am afraid I'll lose all my contacts/phone numbers on my iMac which is running Snow Leopard.  I don't want to put  Lion on the iMac, but I'd like to use iCloud between my new iPhone, my iPad, and my MacBook Air.  Can I do that?  Is so, how?
    Thanks
    Hal

    like to use iCloud between my new iPhone, my iPad, and my MacBook Air.  Can I do that?  Is so, how?
    Yes.
    Instructions for setting up iCloud on your Mac and iOS devices >  Apple - iCloud - Learn how to set up iCloud on all your devices.
    but am afraid I'll lose all my contacts/phone numbers on my iMac which is running Snow Leopard.
    Your iMac contacts/phone numbers won't be effected since it's running Snow Leopard.

  • TS2755 why is Messages now showing phone numbers instead of contact names.  any ideas?

    why is Messages now showing phone numbers instead of contact names.  any ideas?

    Check to see if you have contacts in your Contacts app. This is something that can happen sometimes, and is usually cured by resetting the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. No data will be lost.

  • I lost my phone i bought a new iphone 4 is it possible for me to copy my contacts phone numbers from skype to the phone book of iphone4

    i lost my phone i bought a new iphone 4 is it possible for me to copy my contacts phone numbers from skype to the phone book of iphone4

    Using an iPhone without a wireless service plan

  • I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    How did you rebuild?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • How come when I look at my text messages, my contacts' phone numbers appear instead of their contact names?

    How come when I look at my text messages, my contacts' phone numbers appear instead of their contact names?

    If you're with Verizon, here's what I found on the boards:
    Dial *228, press 1 when the nice lady answers and wait until she tells you your phone has been successfully programmed.
    Then hang up, and press the home key twice rapidly and delete the open/running apps that appear there - delete from that second screen, NOT from the Dock at the bottom of your home screen!  You don't want to delete the programs, you just want to close the open/running apps.
    Wait 5 minutes or so, then voila!  Mine was fixed!

  • Where did my contacts phone numbers go when i backed up to the cloud?

    When I backed up my iphone to the cloud my contacts phone numbers disappeared from my phone and the cloud.
    Can anyone help?

    Is back up and sync the same thing?
    No. Syncing transfers iTunes content to your devices. Backing up stores all data (minus iTunes content) that you have on your phone, and can be loaded onto a different device or reloaded onto an existing device.
    Go to Settings > General > Reset > Erase All Content and Settings. Let the device power down and back up. Go through the setup screen and DO NOT select restore from iTunes backup. Instead, choose iCloud backup, sign in with your Apple ID and select the correct backup.

  • I can't move my contacts ( phone numbers and email addresses) from outlook express to my 8900 phone

    i can't move my contacts ( phone numbers and email addresses) from outlook express to my 8900 new phone through the usb cable.
    i have the same contacts in both outlook and outlook express, can this help.
    can anybody help

    highland_ddmac wrote:
    I have the 8900 and when I try and synch I get the error "unable to read application data". Very, very annoying.
    Wondering why I switched from Nokia!
    Can anyone help please??
    Hi and Welcome to the Forums!
    A lot more detail is needed to understand your issue...for instance:
    Your specific BB Model
    Your specific BB OS (all 4 octets)
    Your DTM version (again, 4 octets)
    Your PC PIM version
    Your PC OS version
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Time capsule problems after OS reinstall

    After getting a blue screen on restart I had to do an archive/OS reinstall today. The reinstall worked fine but I am now having problems accessing my Time Capsule. At first my computer didn't even recognize my time capsule. After restarting my time c

  • HELP!  Can't mail a ZIP file.

    For some strange reason, my Mac Mail has decided to stop letting me email ZIP files, is there something I should know, or do to correct this. Thanks. dave

  • By Which tool  . . . . .   DBA can admin E-Business Suite database ?

    Dears . . . After greeting . . . My question is By which tool as a DBA can admin the Database in Oracle e-Business Suite Application ? Because i have conflict understanding between Oracle Enterprise Manager and Oracle Application Manager. Is Oracle E

  • Exam 1Z0-591 - Oracle Business Intelligence Foundation Suite 11g Essentials

    Hi, does anyone knows if this exam can be taken online, or at all ? When pressing 'Register for this exam' at 'Oracle Certification Program: Oracle Technology and Applications Certification ' I'm directed to a general page for exam-registration, but

  • Reading XML element attribute

    I use JSTL to read a remote XML but can only print the content of the elements. How do i print the content of the attributes? <root><person id="1">George</person></root> For example, to read the Person's name i use: <x:out select="$xmloutput/ROOT/per