My Contacts suddenly switched to FaceTime and I cannot change it back, including Restarting.  How can I do this?

My Contacts suddenly switched to FaceTime and I cannot changge it back, even by Rewstarting.  How do I go back to the ability to making a voice call?

Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
Thank you,
Deb

Similar Messages

  • HT201355 i reset my iPad3 to factory settings because it was freezing up. when i followed directions on uTube the screen now has Activate iPad. It is currently linked to an icloud id and I cannot remember what I used. How can i recover this icloud id and

    I need to activate my iPad3 after I reset it to factory settings. it informs me that it is linked to an Apple ID that I used to set it up when I bought it 4
    years ago. I cannot remember whether it was icloud or gmail. How can I recover that Apple ID? It will not activate with my present apple id.

    If he doesn't remember the password or the Security Questions, he will have to contact Apple Support to have the Security Questions reset so the password can be reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • My 2nd generation iPod nano screen is showing lines and I cannot see the whole menu. How can I fix this problem?

    I believe that my wife disconnected the iPod nano (2nd Gen.) improperly and now the screen has a whole bunch of lines. I can see the screens moving when I move to the next screen. But it's just lines. Any help would be greatly appreciated.

    well unfortunatley your warranty is over so the device is not covered,  BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen).  You can try to restore your ipod to your computer to see if it might be some kind of software related issue.  Just restore to the last sync you have on iTunes.  But FIRST...I would try to Reset your ipod.
    Go to Settings>General>Reset> Reset all settings.

  • TS1292 My pin number had been already use? I bought a $10 card and it appears that has been used. How can i solve this?

    Hi!!
    My pin number had been already use? I bought a $10 pin number and it appears that has been used.
    How can i solve this?
    I already speak with a representative of the provider company and they told me to contact Itunes or apple to solve this.
    Help me please!!
    I cant neither pay with my Master card debit and now with a pin.

    From where did you buy this "PIN"? And did you get an actual card, or did they just send you a number? If you got only a number, then you may well have been defrauded. You'll need to go back to whoever sold you this "PIN" to resolve the problem. Apple to the best of my knowledge does not authorize any company to provide codes rather than a physical card and hence probably cannot help you if you did not get a physical iTunes card or receive a gift certificate issued by the iTunes Store themselves.
    Regards.

  • I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?

    I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?

    contact adobe support and request an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html

  • I forgot my security answers and need to reset them to put new how can I do this?

    forgot my security answers and need to reset them to put new how can I do this?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (98689)

  • I am on a intel Imac and need to update to 10.5. How can i do this?

    I am on a intel Imac and need to update to 10.5. How can i do this?

    You really should update to Snow Leopard because Leopard is no longer in production. The following tells you about Snow Leopard but also what's need to upgrade past Snow Leopard should you be able and wish to do so.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
      1. Open Disk Utility from the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal
    startup drive.
    C. Important: Please read before installing:
      1. If you have a FireWire hard drive connected, disconnect it before installing the update
          unless you will boot from this drive and install the update on it. Reconnect it and turn
          it back on after installation is complete and you've restarted.
      2. You may experience unexpected results if you have installed third-party system
           software modifications, or if you have modified the operating system through
           other means. (This does not apply to normal application software installation.)
      3. The installation process should not be interrupted. If a power outage or other
          interruption occurs during  installation, use the standalone installer (see below)
          from Apple Downloads to update.  While the installation  is in progress do not use
          the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
          1. Insert OS X Installer Disc into the optical drive.
          2. Restart the computer.
          3. Immediately after the chime press and hold down the "C" key.
          4. Release the key when the spinning gear below the dark gray Apple
              logo appears.
          5. Wait for installer to finish loading.
          6. Follow instructions.
    E. If updating:
      1. Download and install update(s) 
      2. Use Software Update, or
      3. Download standalone updater(s).

  • My iPhone does not always send iMessages to other iPhones who have their iMessages on. Most times I text a new contact with an iPhone first, they show up as regular text messages. How can I fix this?

    My iPhone does not always send iMessages to other iPhones who have their iMessages on. Most times I text a new contact with an iPhone first, they show up as regular text messages. How can I fix this?

    Yes to receive an iMessage the recipient would need an iOS device (iPhone, iPod, iPad) and an internet connection. This is a messaging serviceprovided by Apple so the recipient does not need to check emails. If the contact does not have internet access at the time the iMessage is sent then a normal SMS through your carrier can be sent instead if you have "Send as SMS" turned on in Settings>Messages.

  • I have two apple ID's but cannot remember the security question answers and the email address is no longer active - how can I access this account

    I have two apple ID's but cannot remember the security question answers and the email address is no longer active - how can I access this account as it seems to be the one my icloud space is attached to.  I haven't backed up my ipad or photos for a while. 

    Security questions:
    https://discussions.apple.com/docs/DOC-4551
    http://support.apple.com/kb/HT5312
    If you don’t know your security questions, phone Apple (using the number listed here:  http://support.apple.com/kb/HE57  ) and ask for the Account Security Team.
    About 2-step verification of your Apple ID:
    http://support.apple.com/kb/ht5570
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email

  • HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

    I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

    You cannot.

  • My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

    My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

    Didn't work but thx
    Mark Flohr
    [email protected]
    949-636-3069

  • I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    No easy fix for a few reasons:
    1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
    2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
    I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
    Win7 x64 booting natively via EFI (no bios emulation)
    Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
    My recomendations:
    1) Install on a second smaller hard-drive; or
    2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
    3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

  • I have finalized my iMovie photo slideshow and wanted to burn the imovie onto dvd. how can i do this so i can watch it on my television?

    i have finalized my iMovie photo slideshow and wanted to burn the imovie onto dvd. how can i do this so i can watch it on my television?

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • The conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

    the conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

    try to exit out of the youtube app with the multitasking feature. if this doesnt work then try to do a manual restart by holding down the home and power/sleep button all the way past the "slide to unlock" screen until the ipod will power off and the apple symbol will appear when the ipod tuens back on

  • When I go to update my apps another apple ID comes up. I tried signing out and signing back in. How can I fix this?

    When I go to update my apps another apple ID comes up. I tried signing out and signing back in. How can I fix this?

    Was that other apple id used to purchase/download the app? If yes you will need to use that apple id and password to update the app. http://support.apple.com/kb/he37

Maybe you are looking for