My controller seems to stop udp broadcast

Hello,
I have a remote control sending
UDP packet ->
src:172.17.1.173:1065 dst:255.255.255.255:30718
But the recepter (on wire network) do not receive anything.
Both are on same subnet -> 172.17.1.160/28
We do not use any ACL
idea why?
Many thanks for your precious help.
Cheers
Gael

Hi Gael,
Have you enabled broadcast on controller? Can you try "config network broadcast enable" and see if that resolves the issue.
Regards,
Ankur
*Pls rate all helpfull post

Similar Messages

EEM send UDP broadcast

I need an "action" statement that will send a UDP broadcast to port 1001 with a message of "restart". I have the rest of the EEM script created fine. I cannot seem to figure out how to do this. I have a BGP route that changes every once in a while and when it does the application seems to stop functioning correctly. A restart of the application fixes the issue. The vendor says that if I can send the UDP broadcast then he can program it to see the broadcast and restart iteself. I have created an EEM script that sees the syslog "%BGP-5-ADJCHANGE:" and currently sends an email. BUt we have to manually restart the app. If this is not possible within EEM could it be done with a TCL script and the EEM call the TCL script?
I appreciate any words of wisdom. Thank you in advance.

EEM currently does not support UDP. Yes, a tclsh called from EEM could do this assuming you have a new enough IOS. The UDP extension is documented at
http://www.cisco.com/en/US/docs/ios-xml/ios/ios_tcl/configuration/12-4t/nm-script-tcl.html .

Unable to receive UDP broadcast packets on PPP connection

I am struggling for two days now with no success. I have two modems (do not ask, some special stuff), that uses dial up (PPP) connection. I tried this on windows XP and it works like a charm. I am sending unicast and broadcast UPD packets. If I
repeat that on Windows 7 i can send only unicast data, broadcast packets seems to be lost somewhere. I tried to use Microsoft Network Monitor and I can see that broadcasted packets are being received on my PPP connection. But after that, they are gone. Somewhere
in the kernel. I truly do not understand why. I disabled firewall, antivirus, base filtering engine, tried to log dropped packed in Windows
Filtering Platform, tried clean WIN7 machine and all that with no success.
Here is a sample packet received on interface, but it has newer reach my app:
No. Time Source Destination Protocol Length Info
1 13:20:56.093380000 192.168.1.50 192.168.1.255 UDP 49 Source port: x11 Destination port: x11
Frame 1: 49 bytes on wire (392 bits), 49 bytes captured (392 bits)
Encapsulation type: Ethernet (1)
Arrival Time: May 7, 2014 13:20:56.093380000 Central Europe Daylight Time
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1399461656.093380000 seconds
[Time delta from previous captured frame: 0.000000000 seconds]
[Time delta from previous displayed frame: 0.000000000 seconds]
[Time since reference or first frame: 0.000000000 seconds]
Frame Number: 1
Frame Length: 49 bytes (392 bits)
Capture Length: 49 bytes (392 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: eth:ip:udp:data:vssmonitoring]
[Coloring Rule Name: UDP]
[Coloring Rule String: udp]
Ethernet II, Src: ae:4e:20:00:01:00 (ae:4e:20:00:01:00), Dst: Xerox_00:00:00 (01:00:01:00:00:00)
Destination: Xerox_00:00:00 (01:00:01:00:00:00)
Address: Xerox_00:00:00 (01:00:01:00:00:00)
.... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
.... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
Source: ae:4e:20:00:01:00 (ae:4e:20:00:01:00)
Address: ae:4e:20:00:01:00 (ae:4e:20:00:01:00)
.... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
.... ...0 .... .... .... .... = IG bit: Individual address (unicast)
Type: IP (0x0800)
Internet Protocol Version 4, Src: 192.168.1.50 (192.168.1.50), Dst: 192.168.1.255 (192.168.1.255)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00: Not-ECT (Not ECN-Capable Transport))
0000 00.. = Differentiated Services Codepoint: Default (0x00)
.... ..00 = Explicit Congestion Notification: Not-ECT (Not ECN-Capable Transport) (0x00)
Total Length: 34
Identification: 0x0032 (50)
Flags: 0x00
0... .... = Reserved bit: Not set
.0.. .... = Don't fragment: Not set
..0. .... = More fragments: Not set
Fragment offset: 0
Time to live: 126
Protocol: UDP (17)
Header checksum: 0xb817 [correct]
[Good: True]
[Bad: False]
Source: 192.168.1.50 (192.168.1.50)
Destination: 192.168.1.255 (192.168.1.255)
[Source GeoIP: Unknown]
[Destination GeoIP: Unknown]
User Datagram Protocol, Src Port: x11 (6001), Dst Port: x11 (6001)
Source port: x11 (6001)
Destination port: x11 (6001)
Length: 14
Checksum: 0xafd1 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
Data (6 bytes)
0000 34 34 34 34 34 34 444444
Data: 343434343434
[Length: 6]
VSS-Monitoring ethernet trailer, Source Port: 127
Src Port: 127
I am running out of my ideas, if anyone could help, with any idea, please do. I am not sure if this feature is dropped in win7 or not.

Hi,
From your description, you may gather the network monitor traces to ensure which part lost UDP broadcast packets.
Thank you.
Best regards,
Stevens Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

UDP broadcast over multinetted VLAN

We're having an issue with UDP broadcast over a VLAN that has three IP's configured on it. This is on a Cat 6509.
interface Vlan11
description ZZZZ
ip address 10.10.249.1 255.255.255.0 secondary
ip address 10.10.250.1 255.255.255.0 secondary
ip address 192.168.101.1 255.255.255.0
no ip redirects
ip pim sparse-mode
The device broadcasting is 192.168.101.34.
We've added the global config:
ip forward-protocol udp 4444
And we've tried interface commands like:
ip helper-address 192.168.101.34
and
ip directed broadcast
Nothing seems to help, though. Are there any inherit limitations due to the multinet? Devices on the 192.168.101.0/24 subnet receive the broadcast fine. Devices on the other two subnets do not. Basic routing between all subnets is fine.
Thanks,
Joe

Hi John,
If you're running 2008R2 DHCP, you can fix the DHCP issue that you're having by configuring a DHCP super scope on the DHCP server. We ran into that problem too and managed to get DHCP working on all three subnets. I know it works on 2008R2 but not sure on other versions.
We're mandated to get off the 192.168.101.0 subnet; so, if we can't get it working this way we may need to do a complete cutover including re-IP-ing all devices involved in this dilemma. It's more complicated than I'm stating as this is basically a troubleshooting step to see why it broke. There's an application server involved, an audio streaming server, and some Barix devices. We're attempting to get all the workstations cutover first when we ran into this issue.
Thank you,
Joe

Why WRT54G ver 7 blocks all UDP broadcasts?

My WRT54G seems to be blocking all UDP broadcasts in the intranet side. Is there an option somewhere, which controls this behaviour, because I have not found one.
It does not matter, if I connect my laptop with a cable or by WLAN, no UDP broadcast packets from my server to the laptop go through.
If I connect to either one of my regular switches, UDP broadcast works perfectly.
Note that I'm not using the WAN port at all, so I would expect no filtering on the traffic.

Interesting!
For sake of argument, can you try using the broadcast address of 255.255.255.255 - this is a limited (local network only) broadcast.
Can you see the MAC (layer 2/ethernet) portion with your tool?
The MAC of the destination needs to be all FFs (all ones) for broadcasts.
I am wondering if something is happening at a lower level - like in how switching is implemented in the linksys. I wonder if a linksys switch (only) also does this.
NOTE - ICMP echo (PINGS) do go through my WRV54G to specific addresses and broacdcast the x.x.x.255 addresses.

UDP BROADCAST

Hello,
is there any way to send one byte on udp broadcast
(255.255.255.255) port 8999 and listen the response with
actionscript.
Thanks a lot

You would need to either enable multicast-unicast on the WLC or the more preferred method would be to enable multicast-multicast on the WLC under CONTROLLER>General. Unicast is a lot of overhead on the WLC as the WLC has to replicate the packet for every AP that is joined to it. With multicast, you have to multicast routing on the network and PIM enabled on the WLC management interface VLAN, the AP VLAN(s), and the client VLAN(s).
Thanks,
Lee

Using UDP broadcast instead of UDP multicast on a LAN (multicast not working on a major UK ISP router)

I've built an Android app using Cirrus that allows users on a LAN to chat in Morse code! - You can find it on the Android Market by searching for 'Morse Intercom'.
It works fine on my network, lots of other networks, but not on probably the most popular fast broadband fibre network in the UK
A friend of mine has let me piggyback on her network from this provider, and the problem appears to be that the UDP multicast packets RTMFP transmits just aren't being put on the wireless network. FYI the multicast address I use is IP 225.226.227.1 port 32112 .
This is probably fixable in the router, but 99.5% of users will never mess around with the router (and why should they), and if possible I would like to fix this in RTMFP.
Is it possible for me to ask RTMFP to not use UDP multicast, but instead to use UDB broadcast for discovering peers on the LAN ? The problematical router (and all others?) supports UDP broadcasting.
I tried setting 'groupspec.ipMulticastMemberUpdatesEnabled = false;' but this just stopped the app working on anything! What is the purpose of this option?
FYI:
To connect without using Cirrus server assistance I use: nc.connect("rtmfp:");
The complete function I use for setting up multicasting is:
private function setupGroup():void
// Create a new Group Specifier object
//trace("setUpGroup: groupSpec = new GroupSpecifier('myGroup/groupA')");
trace("setUpGroup: groupSpec = new GroupSpecifier('" + MY_UNIQUE_GROUP_NAME + "')");
var groupspec:GroupSpecifier = new GroupSpecifier(MY_UNIQUE_GROUP_NAME);
// Enable posting
trace("setUpGroup: groupspec.postingEnabled = true");
groupspec.postingEnabled = true;
// Specifies whether information about group membership can be exchanged on IP multicast sockets
trace("setUpGroup: groupspec.ipMulticastMemberUpdatesEnabled = true");
groupspec.ipMulticastMemberUpdatesEnabled = true;
// Causes the associated NetStream or NetGroup to join the specified IP multicast group and listen to the specified UDP port.
//trace("setUpGroup: groupspec.addIPMulticastAddress('225.225.0.1:30000')");
trace("setUpGroup: groupspec.addIPMulticastAddress('" + MY_MULTICAST_ADDRESS + "')");
groupspec.addIPMulticastAddress(MY_MULTICAST_ADDRESS);
// Constructs a NetGroup on the specified NetConnection object and joins it to the group specified by groupspec.
trace("setUpGroup: group = new NetGroup(nc,groupspec.groupspecWithAuthorizations())");
group = new NetGroup(nc,groupspec.groupspecWithAuthorizations());
// Set the NET_STATUS event listener
trace("setUpGroup: group.addEventListener(NetStatusEvent.NET_STATUS,netStatus)");
group.addEventListener(NetStatusEvent.NET_STATUS,netStatus);
In conclusion - On a LAN with up to 250 or so hosts, I can't see why RTMFP shouldn't be able to use UDP broadcasting as an alternative to UDP Multicasting. Can it, and if so how?
Graham

Here's more information...
When trying to connect with a 3rd party product, the connection request is sent out to my ISP's DNS server with details of the service ID. Of course it won't find anything there.
So then is tries to use NBNS (Netbios Naming Service) on 192.168.1.255, and still can't connect. Then comes back with a TNS error. i tried TNSPING on this address, and it doesn't find it. I have no clue where it gets this address from.
WHY WON'T IT JUST CONNECT TO THE HOST MACHINE AS DEFINED IN THE TNSNAMES FILE???
PLEASE HELP!!!!

HT201376 I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

About all you can do is wait until it finishes or you get an error message.

Whenever I connect my iPod touch 5th generation to the charger and turn it on, my touch sensor seems to stop working so I cant unlock my iPod without having to take out the charger. Whats wrong with it?

I got this iPod about 3 weeks ago. Whenever I connect my iPod to the charger the touch sensor seems to stop working. When my alarm goes off in the mornings i have to unplug the charger to stop the alarm. I cant do anything while the charger is connected. Any ideas what the problem is or how I can stop this happening?

A few other users have report the same but I have not heard of a solution. Y can try:
- Another cable
- Another USB port
- A wall charger
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How to stop SSID broadcasting

Where do I find the option to stop SSID broadcasting in my Actiontec MI424WR Rev. F Router?
The user guide is located here:
http://onlinehelp.verizon.net/consumer/bin/pdf/ActiontecMI1424WRUserManual.pdf
and it shows where that option is but the screens in the manual do not match the screens you see when you login into the router (not even close). I looked through every screen while logged into the router and I could not find it. I would expect it to be a check box to turn broadcasting on or off in the same screen that you assign the SSID name but the option is not there.
In addition, where can I find a link to download the user guide that matches this router?
I wanted to email Verizon tech support to ask them this but they do not accept email questions concerning Wireless issues. They should accept email questions about any issues concerning their equipment. I tried thrie chat support a few times but it keeps saying it is unavailable even during the listed hours of operation.
Thanks to anyone who can help me out.
Solved!
Go to Solution.

The following FAQ will help you
http://www.dslreports.com/faq/11468
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Can you set the i pod to play albums one after the other as it seems to stop once its played the one album!! :-(

can you set the i pod to play albums one after the other as it seems to stop once its played the one album!! :-( thanks

Unfortunately that is the way the interface is designed. If you select an album from the albums menu, then it plays an album, optionally shuffled and/or repeated. If you select from the artists menu then you should be able to shuffle the albums or songs by that artist or have them played in sequence, again with options to repeat. You can also cue up a number of songs or albums with the On-the-Go playlist feature.
iPod classic manual
tt2

Running 10.8.3 on an Intel iMac 27'. The Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders. Only quitting the Finder from Activity monitor resets it to normal. Any ideas?

My Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders.
Only quitting the Finder from Activity monitor resets it to normal.
Any ideas?

Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something? I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out. But my system CPU is back down to normal and the cursor freezes are gone.
??? it is a mystery! ???

UDP Broadcast Traffic from Cisco ASA

Hi,
I want to know that, like Cisco IOS Router, Does Cisco ASA pass the UDP Broadcast traffic e.g., TFTP etc...?
Any thoughts ???
BR,
Mubasher Sultan

Hi Mubasher,
Unlike the router the ASA does not forward any kind of broadcast packet (with the exemption of the DHCP broadcasts when DHCP Relay is enabled).
I understand that your DHCP server is providing here the IP address for your TFTP servers. I guess you are using DHCP option 150.
So if the DHCP server is on one interface and the client is on another you can configure DHCP Relay on your ASA.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008075fcfb.shtml
In regards of the TFTP requests these will be normal unicast packets as Cadet said so just make sure that you have the proper ACLs and NAT rules for that.

Controller won't stop vibrating

Ps4 controller will NOT stop vibrating.... Tried reseting but no joy, cannot connect to the ps4 at all. Please help!!

Have you tried holding down the Playstation button on the controller for a few seconds, that should turn off the controller bit like a hard reset on a computer ... then try reconnecting the controller to the PS4 ... that MIGHT work.

My Linksys WRT54GC router frequently stops wireless broadcasting

My Linksys WRT54GC (version2) model router frequently stops wireless broadcasting and I have to unplug and replug the power cable to connect again.
After some time, it again suddenly stops wireless broadcast until it's repowered.
I've been having this problem for over 2 weeks now and tried the latest firmware upgrade and resetted the router for countless times but couldn't solve the problem.
Anyone, has experience in this issue, has any reccomendation ?

Whats the Wireless Settings you have set on your Router (SSID, Channel, Security)?
Try different Wireless Channels on your Router from 1 or 11 and check if you are able to view your wireless network on your computer.

My controller seems to stop udp broadcast

Similar Messages

Maybe you are looking for