My cooliris add on is unable to save my favs. my bookmarks don't get saved either

My Cooliris add on is unable to save my favorites and my bookmarks are not being saved either. Went to Options>Privacy>Use custom Settings and tried to straighten it there. It would not save my preferences. I tried what was offered on the Help page.... not helping. Please help. Thank you

See http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
See also http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Similar Messages

  • Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

    Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

    Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

  • Firefox does not save my my.yahoo homepage. It gets saved in IE but not in Firefox. It opens a generic yahoo page and when I start to key my ID it shows it and it has saved my password. This is in Win7, my Vista PC works fine.

    This seems to have started a few weeks ago when I was on ver 3, I changed to ver 8 with the same result. Vista IE, Vista IE and Win7 IE all work correctly.

    In the '''Privacy''' tab under '''History''' you have to change the '''Firefox will:''' option to '''Use custom settings for history'''. If the existing option is '''Remember history''' then changing the settings may not help. The reason for the problem might be different.

  • Unable to save in Enterprise

    Good Day To All,
    I'm working in CRXI 11.5.0.313 and using INFOVIEW as my frontend. Just recently I am unable to save reports to certain directories.
    I get
    "Add objects to folder" right is required to save to the document to folder "Finance".
    Please keep in mind I have full rights as Admin. And I have added reports to this directory in the past.
    Any help would be appreciated.
    Regards,
    David Martinez

    Have you upgraded your system recently to any patch?
    I had a similar issue in BI 4.1 SP2. Please check the below note
    1970288 - Error Could not save the document to the repository for the following reason:[repo_proxy 58] when saving a report to the repository from the webi rich client
    Try by giving full control on the applications and Public folders.
    If issue still persist, try to add the user to admin and check it again.
    If issue not persists, raise an Incident with SAP.  Sure you will have some ADAPT.

  • I am unable to Save the "Note" field while Creation of new  Contact

    Hi ,
    I  am unable to save the Note field while Creation of Contact in Web UI.
    Its happening in the Dev system but not in the QA Web UI.
    I have tried to debug  the component BP_CONT, But no use. 
    Can any one tell me the what could be the problem?
    Regards,
    DN

    Hi DN,
    The Notes part comes from the following view:
    BP_DATA/Notes (Context Node: NOTES; Attribute: TDLINE)
    You can debug in this view.
    It could also be a case of missing authorization - the entered text don't get saved when the user does not have authorization to save text in text objects. Please check.
    Regards,
    Shiromani

  • I am unable to save a bank statement - a drop down box wants my "owner password" before it will save.  How do I find this?

    Recently, I have been unable to save my bank statements.  I now get a "drop down box" asking for my "owner password".  When I insert my password, it does not recognize it?  Any ideas?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Error while creating task: The server was unable to save the form at this time. Please try again. (SharePoint 2013)

    I get the following error while saving a task inside task list:
    "The server was unable to save the form at this time. Please try again."
    I tried restarting "search service host controller".
    The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
    I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
    How do I find information on the exact problem that is causing the error? What are possible solutions?

    Hi robikshrestha,
    This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
    in your situation?
    Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
    log and ULS log, see whether there is related information.
    If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
    Thanks,
    Qiao Wei
    TechNet Community Support

  • "Unable to save the raw conversion settings. There was a write permission error."

    I just built a new workstation for processing photos using PS CS5. I use external drives to store my images as I find it easier for backing up as well as for when I want use my laptop for sorting, etc.. I copied over all my old "Collection" files, and of course, had to "fix" them once on the new machine. Once pointed in the right direction, the collections all fill out correctly.
    When I go to process a collection though, I encounter an odd problem I can't seem to sort out. I can delete files, rename files, copy/paste to the external drives, etc.. What I can't seem to do is add Labels, Ratings, or modify RAW settings. I mean, I can use ACR to make adjustments, I just can't seem to save them.
    The system just ignores label, rating commands completely. When I try to save an ACR adjustment I get this error. "Unable to save the raw conversion settings. There was a write permission error."
    The files are NOT write protected. I'm set up as the owner of my workstation, with complete control of the system. I can't seem to find any useful information about this error because the "write permission error" seems to only be happening on installs, so that's all I can find help for.
    My system:
    Intel Core i7 970@ 3.20GHZ
    24.0 GB RAM
    64-bit OS - Windows 7 Pro
    DX58S02 Motherboard
    NVIDIA GeForce GTX 580

    Thanks for replying. I've been going crazy trying to fix this.
    To answer your first question; I use sidecar XMP files. If everything from my archive was shot in RAW I'd try converting to DNG and see if embedding the changes directly in a file worked. Unfortunately, a lot of my old stuff was shot in JPG, so sidecars seems to be the best choice.
    When I add labels, ratings, as well as change RAW settings on files I place on my workstations HD everything works. It's only when I try to do these things with the same files on removable drives that I run into trouble. The drives I use are Transcend 640GB StoreJet 25ms connected via USB.
    I don't think it's a UAC problem. At least, to my understanding, doesn't that control how your machine alerts you to program changes? I looked into how to change ownership, and did so, but that didn't work. Here's a link to what I mean: http://www.addictivetips.com/windows-tips/windows-7-access-denied-permission-ownership/
    I'm stumped. I also hate the idea that I'll have to go through various folders to find images from already created collections, copy them to a new folder on my HD and then work on them. Then I'll have to put them all back... ugghhhh

  • Unable to save paragraph and character styles

    I noticed an issue popping up for me in CS6 yesterday. I thought it was originally because of Fireworks saved PSD but an effort re-create the file from scratch in PS I'm coming across the same issue. In PS when I have a large amount of text layers and create a paragraph or character style, when I have ANY layer/group in my document locked I'm unable to save any paragraph or layer styles. Regardless of the layer or group being locked and regardless of what layer is highlighted I'm unable to save styles / any settings / name etc. The error I get for character styles for example is:
    "Could not complete the Modify Named Character Style command because a specified layer is locked."
    I did notice that in the Fireworks created PSD that without any layer even being locked I'd still get an error. It may be that this other document got some bad mojo from the Fireworks PSD. When creating a test doc and only creating a couple text layers and a bunch of empty groups and layers I'm unable to reproduce this. It appears to happen to me when I have a slew of text layers.
    Has anyone else experienced this and figured out a more solid workaround?

    If you want to add the styles to an already created document:
    1) Create you Character style containing only the character color
    2) Find and Replace, searching for text with red color and replace formatting with the new character style. (Don't type anything in the text part of the Find and Replace dialog)
    3) Create and apply your paragraph style to all. The text with the Character Style applied will stay red.

  • The server was unable to save the form at this time. Please try again - tried the trust standards...

    2013 standard sharepoint server.  Content DBs were on a Trial enterprise server and copied over to standard server. All was good on trial server.
    there are 8 sites on server, 2 of the sites cannot create or edit items, they get "The server was unable to save the form at this time. Please try again"
    googling around i tried everything. restarted search host controller, checked ram usage (8gb free), manage content types, iisresets, edit the web.config file ( add things for ram, search host, etc), no alternate access mappings, .net HTTP activation, rebooted
    server... I'm sure i missed some.
    The server is new install, all but the August HF CUs. Trial server the content DBs came from is at same level.
    It is not a server level issue as the other 6 sites are fine. its something with just 2 sites.
    kinda stuck here...
    Thanks,
       Scott<-

    With the USL Logs were hard to track down what was happening, though I think it was too do with /_vti_bin/client.svc/ProcessQuery.
    I did the Enable/Disable Anonymous Access on the Directory with no luck.
    Brought up Fiddler and Saw that I was getting 401 and 500 Errors on
    GET http://team.intranet.eandm.com/it/_vti_bin/client.svc/ProcessQuery HTTP/1.1
    So it had something to do with Permissions. I checked the Authentication and the sites that worked had Forms Auth Enabled, and the ones that didn't, didn't have forms Auth enabled.  Enabling it manually was no go.
    I then went though the web.config on the working and non-working sites and there were some differences.   The Authentication was Forms on the working site, Windows on the nonworking. There was many things not present. httpModules section was missing,
    Many of the Microsoft Identity /Authentication lines etc. 
    So I Basically took the web.config from the working site and copied it to the non-working site preserving the following line from the original web.config:
    <machineKey validationKey="{key}" decryptionKey="{key}" validation="{hash}" />
    After that I had Security Issues, Though I think this was Caused by the July 2014 CU making everything use the Microsoft Identity parts, where as the server I was porting form had the sites created before the July 2014 CU. (though both were at the same level)
    Even though all of the users were present in the site security, I had to Drop and re-add them to every site/and list with special Perms. 
    With the Security Fixed, I no longer received the Error "The server was unable to save the form at this time. Please try again"
    Knock on wood its all functioning fine. 

  • The server was unable to save the form at this time. Please try again

    Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
    response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
    If I try to add or modify an item in the list by clicking 'add new item' I get "The
    server was unable to save the form at this time. Please try again."
    I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
    memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
    This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
    There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?

    One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
    Please try again."
    This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
    of "Use Remote Interfaces  -  Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
    I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
    permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any.

  • Unable to save pages or images

    Hi,
    I recently updated my Firefox to version 19.0.2 on my Mac running OS X 10.6.8.
    Now I am unable to save images or pages to my hard disk, when this was working fine while using Firefox 16.
    Please help me out on this!
    Thanks,
    Chaitanya

    Hello chaitanyaagrawal, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    thank you

  • Hi I am using MAC OS Yosemite 10.10.2. I am unable to save images post processing in CC 2014. Error given - "Unable to save image Write Access not granted"

    I am a new user to the Photoshop CC 2014. I am unable to save images post processing. Error given is "Unable to save image Write access not granted". Can some one please help me with this.
    I am using Mac OS Yosemite Version 10.10.2
    Regds
    Shashi

    In a finder window highlight and right click the folder you are trying to save to and select Get Info. In the window that opens look at the bottom to see if you have Read/Write permissions. If you don't click the Plus sign and add your Admin Username to the list and give it full Read/Write permissions.
    Open Disk Utility and on the First Aid tab select Repair Permissions and let it run.

  • Unable to save a workbook ??

    Hi experts ,
    While trying to save a workbook under favourites we are getting one error message
    "workbook storage fault 310"
    Pls suggest the correct solution to overcome this issue
    Regards ,
    Subash Balakrishnan

    hii subash,
    check the following threads.
    Unable to Save Workbook As ....
    how to add workbook into favorites
    hope it helps,
    regards,
    raghu.

  • Unable to Save more than 1 Business-object-provider for the Connector.

    I m using MEP 1.0 Platform.
    My Ecbo Connector "BankDb" had initially "Account" Object Provider which i was able to save successfully via the MEP console.Later on i added the "Statement" Object Provider to the same connector. But i get this Exception
    java.lang.IllegalArgumentException: Object:
    {[[email protected]f,
    [email protected]55,
    [email protected]f,
    [email protected]c,
    [email protected]2,
    [email protected]d,
    [email protected]9]} is not a known entity type.
    I shut down my Server & then restarted it.i removed the AccountObject Provider & Added StatementObject Provider instead & clicked save & it saved my Connector Successfully But when i tried to add the AccountProvider too i get the same exception.In short i am unable to save both providers at the same time in the console.
    I googled later on & found something Similar on java.net
    https://glassfish.dev.java.net/issues/show_bug.cgi?id=3235
    I am not sure about all of this as i am just a beginner.
    Please Help
    Thx in Advance
    Alex.

    Hello, thanks for your interest in the GlassFish Mobility Platform. The ECBO architecture supports exactly one business-object-provider per connector. You could combine your account and statement data into a single composite business object. You could also upgrade to MEP 1.1 and use the dynamic data feature (JerseyME) on the client to retrieve dynamic data such as the statement report and use the business-object-provider for the synchronized data, ie. the account activity. For more information see the [Sun GlassFish Mobility Platform 1.1 Developer's Guide for Enterprise Connectors|http://docs.sun.com/app/docs/doc/820-7207] .
    regards,
    Hans

Maybe you are looking for