My cord isnt working anymore it worked literally 2 hrs ago

My cord is not letting me power my phone or sync it to my computer but it was working fine last night what happened

Sometimes lint gets in the lightning port, use a bright light and see if it is clean in there or if you see lint built up.
Sometimes the connector end of the cord can be damaged or kinked...if you can get another cord to try that will tell if the cord itself is bad.
If nothing seems to help, take the iPhone and cord to an Apple store genius bar and have the technicians test them for you.

Similar Messages

My Ipod 5 is completly disabled and my cord isnt working so how can i get into it?

I need a way ASAP, please. My cord is broken so i cant connect it into Itunes to restore it. So im stuck with an Ipod 5 thats disabled

If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
or
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My charger isnt working

my iphone 5 charger isnt working. a few days ago i would have to hold it in the right position for it to charge but now i get nothing

Probably spoiled. The wire must be broken

Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.

Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.

Click here and request assistance.
(91679)

HT201406 my touch screen on my ipod isnt working anymore

my touch screen on my ipod isnt working anymore i tried to do a hard reset where i hold all the buttons for 10 seconds and went on itunes to restore it and that didnt work what are my other options?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

My Wlan isnt working anymore.. i cant turn it on anymore.Why?

Hi everybody, I really need your help! Since I've got the new iOS 6 my WLAN isnt working anymore. I can't even connect it with my internet at home because it is switched off and i cant slide the button to turn it on.. Can somebody please help me? I've already did a back up and set everything back but that didn't help either. (

Try this??
https://discussions.apple.com/message/18479234#18479234

I have adobe reader 11 and it isnt working anymore

I have windows 7 and my adobe reader isnt working anymore now that I have upgraded to the latest version. It opens the PDF up and then times out and says there is a error and the program is closing! I have tried repairing it and uninstalling it and then reinstalling it several times.....and nothing works. Please help.

http://labs.adobe.com/downloads/acrobatcleaner.html
Try the Acrobat and Reader Cleaner tool, then reinstall.

MY BB CURVE 9300 LED ISNT WORKING

AFTER UPGRADING MY BB TO OS 6 THE LED ISNT WORKING ANYMORE.. when someone texted me that should be on red light but now its still on green, thats while i need to unlock it first before i can see if someone has texted me... even on facebook,twitter and bbm notifications.. the only time it changes its color is when its low battery, what the heck happened to my bb? i cant find the LED settings on TOOLs... please answer!

Hi
1foxyminx wrote:
Is this a virus?
No.
The Blackberry is designed to be reset by removing the battery whilst the device is powered-on. Leave the battery out for a minute or 2.
See if that resolves the problem. If not then more information will be needed before making suggestions. Please provide as much as you are able of the the following
Blackberry Model.
Carrier Name.
Do you have a Data Plan?
Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
Memory for Device and SD Card Options > Memory
Any error statement or code.
The Exact nature of problem - the more info the better.
When this started and whether it started just after an update or new App download and which App/s theme/s download.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Why my sound button isnt working after upgrade to ios 6.1.3??

I recently upgrade my ios. And found out after that there's a sound bug. My ihone sound isnt working at all... Can anyone help...?

iOS 6.1.3 has so many different bugs. I updated my iPhone 4S to this version and now my phone doesn't charge anymore. I and Apple Support technician believed that it's a software problem but they couldn't fix it at all and now I have to wait until the next update of iOS. So don't bother yourself just wait for the next update. Also, contact Apple Support Centre and open a case to report your problem because if it doesn't a common problem maybe they will not hear about it and your problem occurred in the next update again.

My nano isnt working and the updater isnt working

i've had my nano for a few months, a little before apirl i think. and i havent been adding new songs for about a month. i recently got a new cd for my birthday and i wanted to import them into my ipod. the updater came up and said i needed an update. so i updated it. I DID NOT CLICK RESTORE. i made sure i didnt click restore because i've seen what happens to an ipod if you do. it erased ALL my songs on my ipod. then i disconnected it and reconnected my ipod and my computer and iTunes wont recognize my ipod anymore. i went to My Computer and right next to the F: Drive thing, it said removable disk instead of iPod. the computer still charges my ipod, but other than that, my computer doesnt recognize it.
i've tried the 5 r's, and it didnt work. i tried many solutions posted on the forums, but none of them have worked so far. i have also tried the HP USB Disk Storage Format Tool but it requires me to use the updater, which isnt working.
if someone has some solutions, please email me at [email protected]
i dont have time to check back on this post, but leaving a reply to this message will help too.
Thanks in advance.

I FIXED THE PROBLEM!!! if you have this similar problem, follow these instructions. THANK YOU SO MUCH TO THE ONE THAT POSTED THIS!!! kznano
"Here is what I did folks after the 2006-06-28 updater did a number on two nanos.
I reformatted iPOD drive to FAT32 and then used the 2006-06-28 updater to restore. You lose all your data from the iPOD so have to reload.
Steps that I followed to fix:
1. Connect your iPOD and put into disk mode (hold down menu and select (center) until apple logo appears, then immediately hold down select(center)and play/pause until iPOD enters disk mode)
2. Find out what drive your iPOD is on by looking in My Computer (e.g. E:, G: or I:)
3. Go to start menu --> run
4. Enter cmd and select'OK'
5. Black dos box comes up
6. type "format I: /FS:FAT32 /Q (enter)"
(I: is the drive name - change to your drive if different)
7. type enter when it asks for the disk.
8. Leave disk label blank. (just hit enter when prompted)
9. After finish formatting use system tray to safely remove hardware from the drive.
10. Restart computer
11. Launch ipod updater
12. connect ipod
13. After recognizes iPOD - select restore
14. Let it complete restore successful - iPod may still show the do not disconnect
15. Disconnect ipod (again using system tray)
16. Restart computer
17. Launch iTunes
18. Connect iPOD should be recognized by iTUNES (FINALLY!!)
If not try uninstalling and reinstalling iTunes - then connect iPOD "
heres the link to the forum i found this in: http://discussions.apple.com/thread.jspa?threadID=451219&tstart=0

App store isnt working on mac!

it disappeared then i found it in the trash and when i dragged it out, the icon isnt there anymore and when i click to open it it says "You can't open the application App Store because it may be damaged or incomplete." what should i do????

Open  > About this Mac, and tell us what Mac OS X version you have. You have the OS X Combo update you have to install depending on your OS X version below:
- 10.6.6, 10.6.7, 10.6.8 > http://support.apple.com/kb/dl1399
- 10.7, 10.7.1, 10.7.2, 10.7.3, 10.7.4, 10.7.5 > http://support.apple.com/kb/dl1582
- 10.8, 10.8.1, 10.8.2, 10.8.3 > http://support.apple.com/kb/dl1640
If that doesn't work, reinstall OS X. If you have OS X 10.6.6, 10.6.7 or 10.6.8, insert the OS X disc, hold the C key while your computer is starting and reinstall Mac OS X. After reinstalling Snow Leopard, open  > Software Update.
If you have OS X 10.7 or OS X 10.8, hold Command and R keys while your iMac is starting and reinstall Lion or Mountain Lion

On the last down load to11.3 the down load stop so i unpulged it from the computer and it seems my phone isnt working right

What should i do? do i roll it back i did back up
my phone before the update.
on the last down load to11.3 the down load stop so i unplugged it from the computer and it seems my phone isnt working right

Version is
7.1.2 (11d257)
when i was updating the progression on the phone stop for at least a hour, so i unplugged it and i works but having issue with texts not getting to the person i sent them to, and when looking at my texts it hangs up and screen looks like the text is trying to turn but i have to turn phone off and start again.
The **** phone when i hook it to charger cord it backs up and i am sure the back up is not a fully loaded back up update.
But hey i don't want to make i worse!
It never went all the way through the process the line that highlights when it doing updates. I have run the diags from the site and it says all is good but i feel i have done something wrong??????
Thanks for replying

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

My sound is fine but my mic isnt working. how do i fix or figure out whats wrong with it

Title says it. I just did a clean wipe on my computer and now my mic isnt working on vent or skype, i dont know what is wrong with it. When i go to my sound hardware it says my external mic, IDT high def audio codec is enabled..

Same thing here. Must be update related. Who knows. Tried to go into ventrilo today and nada. Can hear people fine, microphone not picking. In my devices it says my Anvex Virtual Audio is "not available", same with the "IDT High Definition Audio Codec. Now I'm starting to get a little agitated. No diagnostics have come back with a ping on the issue. All settings seem fine. I HAVE AUDIO, as in my speakers are working so **bleep**.
I'm lost. No clue how to fix it. Guess I'm no longer raiding and that if this isn't working I'm going to go buy a Dell and rage beat this piece of **bleep** in the yard. That's right. I am taking 3 years of continual frustration out with HP errors, Vista complications and overall disatisfaction.
If you can fix this problem I will offer you pictures of fluffy kittens and circus acrobats/contortionists. Now fix my ventrilo. lol

Can I install the online version rather than using my dvd? it successfully installed (up to a point) that way, it just wont accept my serial number for some reason. my dvd isnt working properly.

Can I install the online version rather than using my dvd? it successfully installed (up to a point) that way, it just wont accept my serial number for some reason. my dvd isnt working properly.

If it gets far enough to reject your serial number, it won't help to download it. It must have installed ok.
What is the message you get (DON'T tell us the serial number!!)?
Does it mention a "qualifying product" by any chance?

My cord isnt working anymore it worked literally 2 hrs ago

Similar Messages

Maybe you are looking for