My country  ( EGYPT ) is not on the drop down list for the FaceTime app ?

While trying to use the FaceTime app.on my iPad I was asked to identify my region I did not find my country EGYPT on the drop down list of all countries .
What shall I do ?
pls. Help...
Thank you .

We are users.  Contact Apple.

Similar Messages

  • Lotus Notes Missing in Drop Down List for Calendar Synch

    Hello there,
       A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2.  I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes. 
      B)  When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes.  I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work.  I have checked and all the connectors are there, but for some reason, they are not being recognized.  Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
    Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward.  Any ideas on how I can get this software to recognize Lotus Notes?  I appreciate any help you can give.
    Thanks,
    Rick

    While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
    CALL METHOD grid1->set_table_for_first_display
          EXPORTING i_structure_name = 'SFLIGHT'
                    is_variant       = gs_layout           
                    i_save           = 'A'
                    i_default        = p_def
          CHANGING  it_outtab        = gt_sflight.

  • Custom drop down list for the filter for BEX report

    Hi, all:
    I am writing a query for a BEX report that prompts the user to enter a value for a field "GL account".  I would like to have the user select from a limited number of GL options rather than have the whole Chart of accounts show up. Is there a way to make a "custom" drop down list for the filter?
    Thanks!
    Jenny

    You need to make your GL account info object as an authorization object. And in the info object ,for BEx you need to select the option "only authorized values".
    Create an analyis authorization on gl account and assign the restricted set of GL accounts to the user. Asign this analysis authorization to the user.In the query restrict this infoobject with an authorization variable. This would solve your purpose.user would be able to see only a selected set of GL accounts for which he is authorized.

  • Rejected Quotation Should not appear in Drop Down List

    Dear All,
    While Making PO With Reference to RFQ.
    In ME21N while selecting Rejected Quotation should not come in Drop Down List
    Only Those RFQ with Accepted should come
    Regards
    Amey

    Can it be done in Standard Tcode.
    Are there any customisation for it
    Regards
    Amey

  • How to change number of remembered items which would be shown in drop down list for edit controls. This use to be at least 5 I think, but now it is only 2!

    I need to see 3 different remembered usernames in drop-down list for username input.

    Works fine here. I can see at least four user names in the drop down list of a login form.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Drop down list for a field in table maintainance

    Hi,
    I have created a table maintainance for ztable. I need a drop down list for field so that user can select values present in the list while giving entries.
    I can not use fixed values in domain, because feild length is more and it wont fit into fixed values.
    I am trying to use VRM_SET_VALUES FM but not getting output. Can any one help me on this.
    Thank you,
    Regards,
    Kusuma K.

    TYPE-POOLS: vrm.        Include this in your program
    DATA: l_name  TYPE vrm_id,
          l_list  TYPE vrm_values,
          l_value LIKE LINE OF l_list.
      LOOP AT it_paym INTO w_paym.
        l_value-key = w_paym-pay_method.
        l_value-text = w_paym-text.
        APPEND l_value TO l_list.
      ENDLOOP.
      l_name = 'Table-field'.   change it as per your requirement this has to be perfect
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = l_name
          values          = l_list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Hope it helps you,
    Abhijit G. Borkar

  • How to add drop down list for query manager report in sap business one

    Hi Every one,
    I need drop down list for parameter selection in sap business one Query Manager.I have two Parameters 'Sales Order','Invoice'.
    Please suggest.
    Thanks and Regards
    DEV

    Hi,
    you need to use this :
    /*select from [dbo].[OINV] T2*/
    DECLARE @Invoice varchar(100)
    /*where*/
    set @Invoice =/* T2.DocNum  */N'[%2]'
    you can change the tables and the parameter number but you have to write it exactly that way.
    when you run the query within the SBO you will get list of objects ( in this case list of invoices)
    hope it was helpful
    Shachar

  • Getting Drop Down list for a field in portal based on the values in R/3

    Hi,
    Presently we were customizing the ESS>>Family Members/Dependants iview in Portal. Because of the design requirement, in R/3 we have added some custom field for infotype 21 (Family Member details Infotype). We have to display these field on portal in Family Member Iview.
    However for these custom fields i am not able to get the drop down list with all the possible values description(F4 help ) in portal unlike the standard SAP fields.
    I am able to display the codes but the description is not coming up for the fields. However for standard SAP field, only description comes.
    For this I tried to attach the search help to the data element and also assigned a check table to the data element in R/3. But still I am not getting the description in the drop down.
    So how can I get the description and only the description in the drop down.
    Thanks
    Namit

    Hi,
    When you run the Search hep is it giving the description or not
    You have to create the serarch help with both the fieldname and its description field then we cna the values. Or
    Try to mantain the text table for this field and get the data.
    Get the valeusinto drop drown with this table Or create the SearchHelp for this text table
    Regards
    Lekha

  • XI pro not in drop down list for serial number verification

    I have installed XI pro and am directed to the serial number upgrade page. XI pro is not on the drop down list and when I enter my serial number it tells me its not for the qualifying product when i try to use any of the XI drop downs. ???

    Hi smilinbudha
    As you've purchased an upgrade, when you enter the the Acrobat Pro XI serial number it will look for a previous qualifying version on your computer.  If not found, you have the option to enter your previous version serial number so would enter your Acrobat Pro X serial number.
    Hope this helps.
    Thanks
    Bev

  • LMS 4.2.3 variable name not show in drop-down list

    Hi all,
    I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
    There is a default threshold template called "CPU Utilization" and "Memory Utilization".
    After I choose either one, there should be one or two variable name in drop down list.
    But I only see "Select MIB Variable" in the list.
    I try to create a template with exact the same variable but still got nothing in the list.
    The strange thing is that no all the default template has this problem.
    I can see variable name under some template like "Device Availability" or "Port Availability"
    And this is not browser problem because I try both IE and Firefox.
    Any one how to solve this?

    Thanks for your advice.
    Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking  don't show me informations.[WS3550 2 devices and 2  WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
    SNMP, Credentials all is good.
    I try resolve this problem many days, but without results. Its semmes like a bug.
    ANy propositions?

  • HCM Processes & Forms: Field not updating after Drop Down list selection

    Hello all,
    I am having a problem that I think happens a lot, but I can't solve it through all the examples given here.
    I have a Drop Down List where I change the value. On the CHANGE event, I have:
    xfa.record.CONTROL_PARAM.ISR_EVENT.value = "GET_ORGINFO";
    ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
    I have defined a User Event called GET_ORGINFO. It gets triggered fine. It moves into my generic service that I defined, and it changes the value that I want to change.
    When I look at the PDF, the value is still in it's old value. So, after reading some blogs, which specifically says, if something goes wrong in one service (I have 3: my own, SAP_PA and S_MGRS_POSITIONS), they all fail. I debugged and checked, and, after some changes, nothing goes wrong anymore, nothing that I can see anyway.
    So what I do see, is that there's a call made like this:
      CALL METHOD me->process_data_container
        EXPORTING
          ref_to_data_container = ref_to_relevant_data_container
          operation             = c_do_operations
          message_handler       = dummy_message_handler
          no_auth_check         = no_auth_check
        IMPORTING
          is_ok                 = operation_ok.
    Within this method, my new value is listed (in the table VALUES_OF_FIELDS). After this call is made, so when it exists the method process_data_container, the old values are back in VALUES_OF_FIELDS.
    So, at the last moment INSIDE the method, the values are correct, as soon as it steps out of this method, the old values are back.
    Does anyone have any idea? Am I doing something wrong with regards to the User Events? I am on EnhP 04.
    Gr,
    Jaron Frenk

    Hey Chris,
    Unfortunately, that's not it. I did check the fields I need. Everything is going ok. As in, I get the fields (with their current values) in my own generic operation. I see everything updated the way it should. But then at the end, nothing happens...
    What exactly do you mean by " then make sure your own generic service has it's input/output defined correctly". What input/output do you mean? I assume the generic service itself is okay, since it works with the user event "USER_EVENT_CHECK". And it sure is possible I am forgetting something in the definition of the user event, but I can't figure out what.
    A small addition*
    I just checked by user event. I have 3 fields selected:
    I0001_PERSG
    I0001_PERSG_TXT
    I0001_PERSK
    The generic service should get the PERSG and PERSG_TXT based on the PERSK that is entered. I don't think I need anything more.
    Gr,
    Jaron
    Edited by: J. Frenk on Apr 26, 2010 9:01 AM

  • TextBox does not update when drop down list selection changes

    I have drop down list the user can select a client name from. Once the client is selected and the "view report" button is clicked it the report has a textbox that displays the Client name or it is supposed too.
    The report will display the first client name but any subsequent client name does not display on the first. I am pretty sure that is because I have chosen the "Dataset" where the both the "values' have "first" in front of the field.
    How do I get the textbox to update to match as each client is chosen from the drop down list? I cannot use the report "parameter" I am passing to the stored procedure because the drop down list's parameter is the database name not the client
    name.
    Any help is appreciated.
    Thanks,
    Sue

    Okay, sorry but I am just getting back to my report. I still cannot display the Client Name in a text box at the top of my report. The textbox must be dynamic because my client name can be one of many that is picked from a drop down list box.
    I added a textbox and tried to use the "join" with my Parameter - clientname.
    In the textbox expression I used the following:
    =JOIN(First(Fields!ClientName.Value,
    "GetDatabaseName"),",")
    I got this error message:
    [rsRuntimeErrorInExpression] The Value expression for the textrun Textbox1.Paragraphs[0].TextRuns[0] contains an error: Overload resolution failed because no Public 'Join' can be called with these arguments:
        'Public Shared Function Join(SourceArray As String(), [Delimiter As String =  ]) As String':
            Argument matching parameter 'SourceArray' cannot convert from 'String' to 'String()'.
        'Public Shared Function Join(SourceArray As System.Object(), [Delimiter As String =  ]) As String':
            Argument matching parameter 'SourceArray' cannot convert from 'String' to 'Object()'.
    Preview complete -- 0 errors, 1 warnings
    I also tried setting up a "filter" on the clientname using these instructions
    Right-click the dataset (GetDatabaseName) to open the Dataset Properties.
    Click Filters in the left pane, add a filter like below:
    Expression:[DBName]
    Operator: In(multiple-parameter) or =(signal-parameter)
    Value:[@DBName]
    I get an error message too which I am not even going to display.
    I can set it up and run it as long as I don't want to change the value in the "textbox" to match the value in the drop down list. I am totally frustrated at this point. Why won't it work?
    Simply put - I want the value selected in my drop down list box to match the value in my textbox at the top of my report if drop down list says "Susie" then I want "Susie" in my textbox or if drop down changes to "Bobby" then I want Bobby to show up in my
    textbox when I generate my report.
    Any suggestions of what else I may need to try?
    Thanks for the help.
    Sue
    Sue

  • ODBC driver does not appear in drop down list

    We created a system DSN using Unix ODBCConfig and the drivers
    supplied by IBM in its iSeries Access package. We are trying to
    connect to our AS400. We now have Coldfusion installed on SuSe 9.3
    Open Enterprise Server. Coldfusion runs fine. When we try to add a
    data source in the ColdFusion administrator, the system DSN driver
    that we configured does no show up in the drop down list. Did we
    miss a step? We have done this succesfully with coldfusion on
    Windows 2003 server.

    What version of ColdFusion are you running? I know with MX 7,
    your individual DSNs may not be listed, ODBC or otherwise, only the
    driver types. You are prompted to provide a valid Data Source name,
    then to select a valid driver type, which in your case would be
    ODBC Socket.
    Phil

  • Restricting the values in Drop Down list for ESS application

    Hello Experts,
    We are trying to restrict the values in the drop down list box for payment method field for direct deposit iview.
    Here Payment is the Zlsch field.
    here we are trying to have only 3 vlaues in the drop down. Do I have to do it from java code or can this be restricted on the ECC side?
    Plese let me know.
    Thanks,
    James.

    James,
    What you have to do is create a DropDown ByIndex element instead of by Key and create a context node PaymentMethodNode and a value attribute PaymentAttribute under it ....then write the following code in the wdDoInit() method as :
    //Add whatever values you want in the DropDown
    String[] priority_options= new String[]{"Payroll/Corp/Partner Check","Employee Payroll ACH(PPD)"};
              List ListOfPriorities = new ArrayList();
              for(int i=0;i<priority_options.length;i++)
                   IPrivateDetailView.IPayment_MethodNodeElement pr= wdContext.createPayment_MethodNodeElement();
                   pr.setPaymentAttribute(priority_options<i>);
                   ListOfPriorities.add(pr);
              wdContext.nodePayment_MethodNode().bind(ListOfPriorities);
              for(int e=0;e<wdContext.nodePayment_MethodNode().size();++e)
                   wdContext.nodePayment_MethodNode().setSelected(e,e>=0 && e<=1);
    and then write the following code in wdDoModifyView() method:
    IWDDropDownByIndex di =(IWDDropDownByIndex)view.getElement("DropDownByIndex");
             di.bindTexts("Payment_MethodNode.PaymentAttribute");
    then create an Action and bind it to the onselect property of the DropDown and write the following code in the onAction method :
    if(wdContext.currentPayment_MethodNodeElement().getPaymentAttribute().equalsIgnoreCase("Payroll/Corp/Partner Check"))
        wdContext.currentSelectedInfotypeElement().setZlsch("C");
        else
         wdContext.currentSelectedInfotypeElement().setZlsch("P");
    I am sure it will work..

  • Creating drop-down list for prodname element in metadata causes errors

    Frame 11
    DITA 1.2
    Due to restrictions beyond our control, we must use absurdly long product names. Therefore I want to use drop-down lists to make it easier for the authors to select a <prodname> in the metadata.
    What I did:
    1. In metaDecl.eddmod.fm, I created a new attribute and named it prod.
        a. I made it the Choice, and Required.
        b. The Choices currently are just Internal and RTVI for testing purposes. I'll put the absurdly long ones in when I have it working.
        c. I have a Prefix rule of: In all contexts Prefix: Product Name: <$attribute[prod]>
    2. I imported metaDecl.eddmod.fm to all of these EDDs:
        In the base EDD  folder:
    basemap.edd.fm
    basetopic.edd.fm
    map.eddmod.fm
    topic.eddmod.fm
       In the technicalContent EDD folder:
    concept.edd.fm
    ditabase.edd.fm
    generalTask.edd.fm
    glossentry.edd.fm
    glossgroup.edd.fm
    reference.edd.fm
    task.edd.fm
    topic.edd.fm
    3. I imported the element definitions into all of the following:
    ChapterOutputTpl.fm
    basemap.template.fm
    basetopic.template.fm
    basetopic.template.fm
    topic.template.fm
    generalTask.template.fm
    glossentry.template.fm
    glossgroup.template.fm
    map.template.fm
    ditabase.template.fm
    reference.template.fm
    concept.template.fm
    task.template.fm
    4. I imported the elememted definitions from task.template.fm into my test document (yes, it is a task topic).
    What happened:
    I get the following error message in the console:
    XML Parser Messages (Document Instance)
    Error at file H:\DITA_Westminster\Procedures - Our DITA\Inserting_Product_Names_Versions_In_Metadata\InsertingProductNamesAndVersionsInMetad ata.dita.82F, line 28, char 49, Message: Attribute 'prod' is not declared for element 'prodname'
    Error at line 28, char 71, Message: Not enough elements to match content model  '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series))*)'
    What I did next:
    1. I removed all elements from the general rule of <prodinfo> with the exception of <prodname>. <prodinfo) is the one that had prodname, vrmlist, (brand|component|featnum|platform|prognum|series) in the general rule. I also did a thorough search to ensure that no other element had this same list of element in the general rule. I couldn't find any.
    2. I did the import to the EDDs and templates thing again.
    3. I got the same error message again. <sigh />
    Question:
    Why am I still getting those 2 error messages? They are driving me crazy.
    Marsha

    Alex Gorly and Matt Sullivan solved one of my issues above:
    Message: Attribute 'prod' is not declared for element 'prodname'
    I'm still stumpled on the other one:
    Message: Not enough elements to match content model  '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series) )*)'
    As stated above, I've even removed everything from the general rule of <prodinfo> except prodname and I'm still getting the same error. I've searched everywhere for this general rule and <prodinfo> is the only place I can find it.
    What I really want is: (prodname), (vrmlist)?, (brand | component | featnum | platform | prognum | series)*
    so that vrmlist is optional.
    No matter what I do, unless I include a vrmlist, I get the above message. Currently, our CMS can't handle vrmlist but I don't want to remove it altogether because we may be replacing our CMS.
    Help please!

Maybe you are looking for