My CPU Multiplyer doesnt work

I'm using a KT3 Ultra, and the CPU clock multiplyer won't work. The only way I can overclock it is to increase the FSB. Also does anyone know how high the FSB can be turned up before damaging the PCI slots?

Ok, the only way you can change the multiplyer is by unlocking the cpu. You can do a search online and should be able to find plenty of documentation to explain how to do this effectively. As far as how high the fsb can go before damaging pci slots. The kt3 has a 1/5 divider in it that kicks in at, I believe 152fsb (?). However, it all depends on if your hardware can handle that high of fsb. Some things don't like to be overclocked. You always run a risk of damaging components no matter how little or how much you overclock.

Similar Messages

CPU Multiplier is Not Visible

Brand New build: i5 4670k + z97 Gaming 5. BIOS and all drivers/utilities have been updated via Live Update 6 as of this morning.
My problem is that when I access the BIOS "Overclocking Settings", the actual CPU multiplier itself is not visible (even in Advanced mode). Turboboost is enabled. So I'm not actually able to adjust my CPU multiplier beyond the stock value (34x). But when I toggle the Overclock Genie, the CPU multiplier finally appears with a fixed multiplier of 40x (which I am not able to manually alter).
Any idea what I'm missing here?

Quote from: kreepyguy on 07-September-14, 06:35:50
Yeah, I'm afraid that I've already tried that. I just tried it again and no luck. I'm going to try resetting CMOS and see what happens.
Well, it is not possible that it doesn't work. Just scroll to where it says "CPU Ratio AUTO" so AUTO is higlighted and use +/- keys of your numpad to alter settings.

Catalog Index doesnt work on alias columns

We have a table with a text column on which we have created a catalog index. The catalog index doesnt work when I create a view of the table with alias column names. Any ideas suggestions.

Interestingly it looks like it does use the index, at least in 11g, as demonstrated below. Can you post a similar demonstration showing exactly what it is that you are trying that does not use the index, along with your version?
SCOTT@orcl_11g> CREATE TABLE a_table (text_column VARCHAR2 (60))
2 /
Table created.
SCOTT@orcl_11g> INSERT INTO a_table VALUES ('rainbow bridge')
2 /
1 row created.
SCOTT@orcl_11g> CREATE INDEX catalog_index ON a_table (text_column)
2 INDEXTYPE IS CTXSYS.CTXCAT
3 /
Index created.
SCOTT@orcl_11g> CREATE VIEW a_view AS
2 SELECT text_column AS alias_column
3 FROM   a_table
4 /
View created.
SCOTT@orcl_11g> SET AUTOTRACE ON EXPLAIN
SCOTT@orcl_11g> SELECT * FROM a_view WHERE CATSEARCH (alias_column, 'rainbow', '') > 0
2 /
ALIAS_COLUMN
rainbow bridge
Execution Plan
Plan hash value: 2287020511
| Id | Operation                   | Name          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |               |     1 |    44 |     3   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| A_TABLE       |     1 |    44 |     3   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | CATALOG_INDEX |       |       |            |          |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CATSEARCH"("TEXT_COLUMN",'rainbow','')>0)
Note
   - dynamic sampling used for this statement
SCOTT@orcl_11g>

My analogue 5.1 Sound System doesnt work on Soundblaster live 24-bit soundcard

Hello!
I have a WavemasterMX-5 5. Surround Sound System with Subwoofer (=http://www.hms-media.de/EN/?Tab=Products&Group=3&Product=7) and it doesnt work on the Soundblaster li've 24 bit.
I have installed all the drivers properly and the card seems to be working ok.... 
But i have a analogue Surround Sound System what must i do to get this working?
Is it possible to add a converter that can transform; digital to analogue signal? Or can i change some settings >?
Plzzzzz Help me !!! I love my music :smileyindifferent:
Greetz Axz:.

> i have surround sound only when i play *.acc files but with *.mp3 files it doesnt work
You'll have to enable surround matrix decoding for stereo material. There are several analog encoding standards (Dolby Surround, Dolby ProLogic, Dolby ProLogic II) but Creative's driver doesn't have an official decoder for any of them Instead, they provide their home-grown decoders and call them CMSS or DTS NEO:6. I can only assume they want to dodge Dolby's license payments by not supporting familiar standards. Anyway, you will find the CMSS modes in the driver or, in case of NEO, in their mediasource player. NEO - because it's in a player and not in the driver - is out of reach for other players such as WinAmp or multimedia and TV software.
If you plan to listen to music only, the Creative CMSS matrix decoders ("upmix") might satisfy you. If you plan to watch movies or watch TV, you will find that, with exception of DTS NEO:6, they are not good at all. A ProLogic II decoder sounds much better. If you are lucky, your player has a software ProLogic decoder. For example, WinDVD has one. Unfortunately, in that case the soundcard's high tech DSP - which you payed $$$ for - will not be used at all.
An alternati've solution for non-gamers (for movies and music) is to install the kx driver from the kx project at http://kxproject.lugosoft.com/index.php?language=en
For music, this driver - strangely enough - not only sounds better than Creative's own player, it is also far more configurable. For example, if your center speaker is from a differerent brand than the main speakers, you can put an equalizer before it. Or you can redirect bass from small speakers to larger speakers and not just to the subwoofer, as is the case with Creative's drivers. The options are endless. You can even create totally different configurations for different situations (movie/music/...) and switch on the fly. Other benefits: the driver is very small and very fast, everything happens instantly. However, its user interface is weird and the project lacks documentation. You will need determination on the first day. Afterwards, you will be able to configure your music/movie system to sound far better than with Creative's driver and customize details that simply can not be customized with the official driver. And the best thing: everything will run inside the card's DSP and the computer's CPU is free to do other stuff. Btw, the link above leads you to the last official release. If you read their forum, you will find a more recent beta release from this year.Message Edited by mirko on 0-2-2005 0:22 PM

A88XM GAMING v1.5 BIOS CPU Multiplier Locked?

Since I updated to the latest v1.5 BIOS the CPU multiplier seems to be locked. Is this intended or an issue with BIOS, or am I just doing something wrong? The multiplier worked fine on v1.4. I am using an AMD Athlon 760k CPU. Thanks.

I cleared CMOS and it's working now, it's something I really should have done in the first place Thanks

Increasing Minimum CPU multiplier

Dear users on the MSI forum,
There is an issue I'm trying to solve for a few weeks now, but without luck. I wish to increase the minimum CPU multiplier.
My system specs:
CPU: 2600k (1.6GHz - 4.3GHz)
Motherboard: MSI P67A GD65
Windows 7 64 bit
I tried tweaking the bios but the only way I found to increase the minimum multiplier is to fix it, thus disabling Turbo, EIST and all energy options. But I wish to keep on using my turbo overclock and energy savings.
In stead of a 1.6GHz - 4.3GHz frequency range I'd like, let's say 2.0GHz - 4.3GHz frequency range.
Is this possible?
I wish to do this because the CPU is constantly working at 1.6GHz during VSTi (virtual instruments) usage. It just doesn't throttle up to a higher multiplier so I have to use a higher latency on my audio interface to compensate the audio crackling.
P.s. I am new to this forum so I might missed some forum rules

The odds of MSI changing the 1.6 to something higher with a BIOS revision are rather slim to none IMO. You might try a ticket with MSI Tech Support & see if a special BIOS is feasable. http://support.msi.com/

MBA2012 cpu multiplier wrong and no turbo boost in Windows7

MBA2012 Corei 7 2.0GHz/ MEM 8GB / SSD 128G.
core i7 3667U, it support turbo boost, max multiplier 3.2GHz (x32, 2core), or 3.0GHz(x30, 1core).
but check cpu-z 1.60.1.x64, it reports cpu multiplier x8 or x19.
core speed does not rearch 2.0GHz(x20) and can not turbo boost.

It is assumed in the model CTO in the initialisation of the MSR in EFI, is to set the Target P-State and 19 at the time of turbo boost, and the root cause of the bug (I originally set 32 is correct).
As a temporary workaround, in the application of the Throttle Stop, but it was confirmed that Turobo Boost working effectively, then, I tried to examine the state of the MSR at the before and after application of the Throttle Stop.
As a result, the following was found.
• The CTO model EIST, Turbo Boost is enabled.
• However, in the CTO model, Target P-State is closed when the Turbo Boost is set to 19-fold. Therefore, (Current P-State) can not be set to at least 19-fold magnification of the CPU.
• When you execute the Throttel Stop, so that can be set to 32 times the Target P-State of Turbo Boost, will be able to raise up to 32 times also (Current P-State) magnification of the CPU.
In fact, before and after execution of the Throttle Stop, appears similar to the following and see the state of the MSR. (The value of the MSR, Save Report(.TXT) of the "About" → "Tools" of CPU-Z in the, you can see)
CPU Throttle Stop before) cpu multiplier 19 (max cpu multiplier 19)
MSR 0x000001A0 0x00000000 0x00850089
MSR 0x00000198 0x00001CD2 0x00001300
MSR 0x00000199 0x00000000 0x00001300
⇒ enable EIST, enable TurboBoost, the current P-State 19, the target P-State 19
CPU Throttle Stop after) cpu multiplier 30 (max cpu multiplier 32)
MSR 0x000001A0 0x00000000 0x00850089
MSR 0x00000198 0x000021A0 0x00001E00
MSR 0x00000199 0x00000000 0x00002000
⇒ enable EIST, enable TurboBoost, the current P-State 30 , the target P-State 32
From the above, CTO model, at the time of initialization when the switch to Windows, it would have been set to 0x1E (0x00001E00: DEC
19) is target Performance State Value is IA32_PERF_CTL of MSR in the BootCamp is a cause of trouble, 0x20 (0x00001E00:DEC 32) you can determine it because it does not, and has been a state that does not increase the magnification was also an attempt to invoke the turbo boost when under load.
Core i5 In the standard model, so go up 26 multiplier, probably should be the value of the following.
MSR 0x00000199 0x00000000 0x00001A00
<Reference>
· Intel64 and IA-32 Architectures Software Developer's Manual Combined Volumes1, 2A, 2B, 2C, 3A, 3B and 3C
http://download.intel.com/products/processor/manual/325462.pdf
· CHAPTER 14 POWER AND THERMAL MANAGEMENT
14.1 ENHANCED INTEL SPEEDSTEPR TECHNOLOGY
14.3.2.2 OS Control of Opportunistic Processor Performance Operation
· CHAPTER 34 MODEL-SPEC IFIC REGISTERS (MSRS)
34.7 MSRS IN INTELR PROCESSOR FAMILY (INTELR MICROARCHITECTURE CODE NAME SANDY BRIDGE)
1A0H IA32_MISC_ENABLE
16 Enhanced Intel SpeedStep Technology Enable. (R/W)
38 Turbo Mode Disable. (R/W)
198H IA32_PERF_STATUS
15:0 Current performance State Value.
199H IA32_PERF_CTL
15:0 Target performance State Value.
32 IDA Engage. (R/W).

How I Re-Unlocked My CPU Multiplier - Z77A-GD65

This whole inconvenience started when I flashed to the latest BIOS for my board. I was curious about the "- Support Windows8 feature" that it had in the description, and so I went for it. Previously, I had already updated my BIOS to version 10.6 without a problem.
After completing the BIOS update, I went into the Click-BIOS II and explored the new options. Boo! Nothing that really benefited me or that seemed "cool" so I just went on with my day. I started to notice that my game (League of Legends) was loading a little slower than before, and that's when I remembered that I had not reset the overclocking options that I had before. I went back into the BIOS and tried to reset my options. No go! Oh, wait! OC Genie! Nope! Flash backup BIOS! Nope, nope, nope! My CPU was hopelessly limited to a multiplier setting range of 16-38.
There are many things that I read and tried that didn't give me back the option to go beyond a multiplier setting of 38, but I will not discuss those now, unless someone asks. Therefore, the following is the exact process that I used that finally allowed me to fully re-unlock my CPU multiplier settings.
Hardware Specs:
Motherboard: Z77A-GD65
CPU: Core i5-3570K
Memory: 8GB Corsair Dominator 1866
Boot HD: Samsung 830 Series SSD
OS: Windows 8 Pro 64-bit
GPU: MSI nVidia 660-Ti OC
What that you will need:
PATIENCE!
Beverage of Choice (Coffee, Beer, Tea, etc...) - VERY IMPORTANT
USB Stick Drive (FAT32, Quick Format)
BIOS Versions: 10.3, 10.5, 10.6 - You can put them all on the USB stick at the same time.
About 1 Hour
These instructions assume that you are starting from BIOS version 10.7 (like I did), but they may work even if you are not currently on that version.
Step 1: Double clear CMOS memory - While machine is turned off and unplugged, hold the "Clear_CMOS" button for 10 seconds. Next, remove the battery (in front of PCIE Slot 1 under dedicated graphics card (in case you forgot ^_^)). Walk away and get a second serving of your favorite beverage. Rum and coke FTW!
Step 2: Put CMOS battery back into its place.
If you have NOT touched (flashed) your backup BIOS then follow instructions for 3A (This is what I did!). If you HAVE flashed it already, follow instructions for 3B.
Step 3A1 : Set BIOS selector switch to 2nd bios (move it to the other side from where it was). Boot into BIOS settings, navigate to BIOS flash menu and select "MultiBIOS flash". It will prompt you if you want to restore the BIOS and select Yes. This will return the "primary" BIOS to the same version that you had on your second BIOS, provided that you have not touched your "backup" BIOS.
Step 3A2: After your machine is done with flashing BIOS, it will restart and attempt to load the OS, it will most likely not find an OS. Go back into the BIOS and check your multiplier settings, mine was still limited to 38; if yours are back to normal and everything works for you and you don't mind being on version 10.3, then good job and you're done! Don't forget to have a good laugh and to feel good about yourself . Otherwise, turn off your computer and for 10 seconds press and hold the "Clear_CMOS" button in the back.
Step 3A3: Flash BIOS 10.3 over the restored primary BIOS and you should be able to recover the "UEFI Windows Boot Manager" option in the "UEFI" boot manager. Check BIOS settings again, my multiplier was still limited to 38. Go to Step 4.
Step 4: Boot into Windows and reinstall the Intel ME drivers.If the driver installs okay then go to Step 5. If driver installation says "your hardware does not meet requirements", go to Step 4B.
Step 4B: This happened to me at some point in trying to fix my BIOS, and so I'm covering it for those that might find themselves in the same situation right now. If the ME driver installation says that your computer does not meet the requirements, then that means that your ME firmware got wiped or corrupted. If you go into your BIOS and check your System Information, you will get the following screen. Where it says "ME Version" that will be blank, no number there. To fix it is quite simple, simply "Flash BIOS" version 10.6, reboot into BIOS and then select "Flash BIOS and ME", select version 10.6 (XXXXXXXX.A60) file.
Step 5: Boot into BIOS, flash BIOS version 10.5, reboot into Windows, reinstall Intel ME drivers.
Step 6: Repeat step 5 but this time flash BIOS (Not Flash BIOS and ME) version 10.6.
Step 7: Boot into BIOS, and this time in the flash menu select "Flash BIOS AND ME", and select version 10.6".
Step 8: Boot into BIOS and CONGRATULATIONS your CPU multiplier is back to normal.

NOTE: You will not get the selection menu for the multiplier, but you can change it with + or -, or by typing in the number. Previously, any time I would type anything above 38, it would simply go to 38. Good luck!
P.S.: I don't care much for stress testing my current OC setup because everything that I do works great (no errors/restarts for 4 months) and is not highly-hardware demanding for long periods of time. League of Legends max settings is easily handled by the hardware configuration and that's pretty much the most intense use that it gets.

My new budget box: some USB problems, and CPU multiplier question

hey, just put together my "new" pc for $130! had some old stuff to put in it, specs are:
msi k7n2 delta2-lsr
athlon xp 2800+ 333mhz barton
(the rest here is old stuff that's still running fine)
crucial ram: 1x 512, 1x256, both 266mhzl
160gb maxtor hd
radeon all-in-wonder 7500
sound blaster audigy
case (2 fans plus an air duct leading to the processor)w/350w power supply,
it's mainly for an entertainment center, going in/out to/from a 5.1 reciever, tv, dvd player, the works.
maybe some light gaming too, nothing harder to run than halo.
i had to reuse the d-bracket from my old k7n266 board, the new one didn't come with one. :(
and for some reason its usb ports do not work: neither do my two front usb ports that are built
into the case. the onboard ports all seem to work, andwindows shows in device manager:
standard enhanced pci to usb controller (x1),
standard openhcd usb host controller (x2),
and usb root hub (x3). pretty sure that means they all should work? i've swapped the plugs
around with no luck anyway. i was mainly wondering if there's some bios setting i've overlooked
to get these working, if not, anyone have any other ideas?
also wondering where i should set my cpu multiplier, i generally understand that it's 166mhz *12.5 with
this processor, does that sound about right? i haven't set the muliplier yet in the bios, i just left it at
"cpu default". i'm waiting to get a new cpu fan before i mess with that. i was wondering if my admittedly
slow ram is at risk with either of these settings, i'm not looking to buy more anytime soon (my laptop
is my "real" computer anyway, handles doom3 pretty well). actually i'm kind of confused on the
motherboard's fsb: it's supposed to be 400mhz, but it only goes up to 200 settable in bios? or is that
400mhz calculated only in windows, when you get the nforce2 drivers going?

CPU multipliers on the bartons are locked. You need to do a mod to be able to change it.
With your memory being 266MHz that will hold you back. You may be able to overclock it so it is running the 333MHz but your system may become unstable. You may want to consider getting PC2700 memory or better.
As far as the USB, make sure you do not have pin 10 plugged in (there is no connector for pin 9). There are some topics talking about this. Just do a quick search. Or as phextor mentioned there are some stickys about it. Read through them and try the suggestions, if that doesn't work post back and we will try to get it taken care of. As far as bios settings on some I know there is an option on how many USB ports are in the system. This is usually under integrated peripherals. Make sure it is at 8 ports or all.
Good Luck
Jeremy

990FXA-GD65 AMD 970 BE CPU Ratio Only working on one core

Pretty much cut & paste of the "990FXA-GD80 AMD 955 BE CPU Ratio Only working on one core" thread.
I have overclocked this AMD 970 BE previously on a asus m3n72-d without issue. Always changing the multiplier to achieve the desired frequency while leaving the FSB at 200. But, after setting up everything on my new 900fxa-gd65 the CPU ratio change to 19x with a fsb of 200 only changes one core to 3.8 ghz and leaves the others at 3.5 ghz (17.5x 200).
full size img link: https://picasaweb.google.com/lh/photo/2lSWaps0s4Gk0fKwdh90bQ?feat=directlink
Already contacted MSI tech support, for whatever good it does me.
Just thought I'd make a new thread to seperate the issue between the two MSI boards.
-d

For what its worth, the problem should be fixed in the latest BETA UEFI/BIOS Release:
--> https://forum-en.msi.com/index.php?topic=151619.msg1122364#msg1122364
Quote
- Fix only Core-0 work with the ratio which value we set.

MSI GF4 Ti-4200 doesnt work with WindowsXP

I can't get the MSI display tools to work - it crashes,
the vbios.dll doesnt load, it also crashes.
the tv in doesnt work ,it crashes
the tv out doesnt work ,it crashes.
all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
what's the deal with this stuff? ?(
I have a Dual AMD athlon Tyan thunder k7 motherboard,
MSI Ti-4200-VTD video card and MSI tv anywhere card.
is there any resolution for this?

I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
If the answer is YES, then I will begin investigating why my system can't.
If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
If you would REALLY like my system details, here ya go...
========================================
CASE - ANTEC SX1000II with 4 internal 8cm fans
POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
BIOS - AMI Ver 3.2 (10/21/02)
PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
DRIVER: MSI 31.00
CAPTURE DRIVER - nVidia 1.08
SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
DRIVER - Creative 3.0.0.18 9/20/02
SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
DRIVER - MS 5.1.2535.0 7/1/01
SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
DRIVER - REALTEK RTL8139 5.396.0530.2001
SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
DRIVER - Adaptec 6.2.0.0 3/19/2002
SLOT 4 - EMPTY
SLOT 5 - MSI SYSTEM D-Bracket
SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
DRIVER - Windows XP Pro native driver
NOTE:
NIC #1 is for home LAN
NIC #2 is for Alcatel SpeedTouch External DSL modem
SCSI DRIVES:
ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
ID 2 - Seagate ST39103LW, 9G, 10K RPM
ID 3 - Plextor CD-RW PX-W1219S
ID 4 - Toshiba DVD-ROM SD-M1201
ID 5 - EPSON Perfection 1640SU Flatbed Scanner
ATA/ATAPI DRIVES:
Primary Master - No Connection
Primary Slave - No Connection
Secondary Master - MATSHITA LS-120 Ver F523
Secondary Slave - No Connection
USB DEVICES:
DIAMOND SupraMAX 56K V.92 Model:SUP2920
Generic Flash Memory programmer and other assorted USB devices on occasion.
MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
========================================
BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
Now, this is just my opinion and may not reflect the feelings of the more sane people around me.
Cheers!

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

On Safari, ipad connects to the internet. But when in applications such as Keynote, I try to e-mail presentattion it doesnt work.

I am a teacher and have my own iPad with a data plan. We also have a router in teh classroom for wifi, and it has a very strong signal. On Safari, the ipads can connect to the internet. But when in applications such as Keynote and HTML Egg, I try to e-mail presentat. or post website to web, it doesnt work. I tried re-setting the proxies and the router, no luck. Please Help! I am a teacher and want my students to be able to post their websites on to the web, and e-mail themselves and their parents their Keynote Presentations.

Try this. Turn your iPad Off. Then disconnect the power going to the router for 30 seconds or longer. Then replug the power to the router (allow it to initialize) and turn On the iPad. Hopefully everything will connect. If not, see below.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

I am locked out of my computer (macbook air) I just got it back from the apple store and they reset it. I put in a new password, and now it doesnt let me log in anymore. Command R doesnt work, all i hear is a sound, but nothing happens.

I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.

What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements.

My CPU Multiplyer doesnt work

Similar Messages

Maybe you are looking for