My CS5 program does not support CR2 photo taken with Canon Rebel T5i. Why?

My CS5 program does not support CR2 photo taken with Canon Rebel T5i camera.  Why?

If you take a look at the following charts, you will find that both the S110 and the T5i are not supported in CS5, both cameras require photoshop CS6 with a camera raw point upgrade, Photoshop CC or Lightroom 4.3(s110) 4.4(T5).
Camera Raw plug-in Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Photoshop CC indepth : camera raw - Supported cameras for plugin and lightroom
http://www.adobe.com/products/photoshop/extend.html
Camera Raw-compatable Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Similar Messages

  • Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

    Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

    This camera is listed in Adobe's 6.2 Camera Raw  update for Photoshop CS5 but cannot be loaded in CS4.
    Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
    And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
    I paid a lot of  money for CS4 and don't want to buy CS5 just because I bought a new  camera
    The upgrade is cheaper than buying the full version.
    Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
    Edit:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

  • Does elements 12 open photos taken with canon 70d

    How to open photos taken with canon 70D in RAW format.
    Does this actually work because it keeps on saying I cannot post a blank message

    Thank you so much for you quick answer.  Works fine, now.  Thanks again, Barbara.
    JWT

  • What are the points which the migration program does not support?

    Hi,
    I have a question about migration program 'RSEC_MIGRATION'.
    As described in 'Running the Enterprise Data Warehouse',
    in 'Frequently Asked Questions - Business Intelligence in SAP NetWeaver 2004s',
    this program supports about 80% automatic migration
    according to some documents.
    What is the rest 20%?
    What doesn't this program support?
    Though it may be difficult to make a list for that
    because settings of authorization objects are various,
    I think SAP should list up as many important points
    which this program does not support as possible
    by using some examples.
    If SAP thinks of delivering such a list,
    when will it be delivered?
    Best regards,
    Kaito Hosoyamada

    Hi Kaito,
    this statement relflects the fact that a program will never be able to handle all potential complex scenarios that customers might have.
    The facts that are not completely covered by the migration assistant are:
    1.) The more complex the existing authorization concept, the more manual migration work might be necessary
    2.) Customer-exit variables for 0TCTAUTHH cannot be migrated; the respective hierarchy nodes must be assigned manually
    3.) Intensive tests are highly recommended
      Cheers
       SAP NetWeaver BI Organisation

  • The extraction program does not support object 0MAT_PLANT

    Pessoal alguém já passou por este problema?
    Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
    Já fiz um novo Init, mas o erro continua.
    The extraction program does not support object 0MAT_PLANT
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

    Hi Eduard ,
    You can try the following steps to solve that
    1. Delete the previous Delta Init for the InfoObject
    If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
    Goto RSA7 ->Select and Delete the Init Request for the InfoObject
    From BW Side
    InfoPackage-> Inti for Source System -> Select & Delete
    the Init Request
    2. Execute the Init InfoPackage for the InfoPackage again.
    3. After successful completion, execute the delta InfoPackage.
    Hope it solves your problem, if not pls let me know.
    Thanks & Regards,
    Chandran Ganesan
    SAP Business Intelligence

  • The extraction program does not support object 0JOB_ATTR

    HI all,
    I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
    The extraction program does not support object 0JOB_ATTR
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
    Thank you.
    G.

    0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
    Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
    I have sent a message to SAP asking for the solution . Below is the reply what they gave.
    "This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
    Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
    If no data is being extracted please do the following:
    If you have data in HRP5050 and still do not get any data please try the following :
    1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
    2) Replicate the Data Source to BW
    3) Activate the Info Source again.
    4) Delete any previous delta initializations for the datasource.
    5) Initialize the delta again
    6) Try to load data".

  • The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1

    Hai friends,
    I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
    "The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
    What does it mean? Kindly help.
    Regards,
    Neha Solanki

    Hi,
    It's not Absolute version. It's obsolete version(means No more)
    This will help you:----
    The extraction program does not support object 0JOB_ATTR
    Regards,
    Suman

  • The extraction program does not support object ZTD_AW_17

    Hi friends,
    When doing extraction I am getting the below error.Please
    see the below extract of system response.
    "The extraction program does not support object ZTD_AW_17
    Message no. R3 009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
    System Response
    The data extraction is terminated."
    Please help me out.
    thanks
    Venkat

    Hi Venkat,
    Have you checked to see if the ZTD_AW_17 infoobject is in your system and active?  If not, transport the object from your D system to the P system.  Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there.  If so reactivate the transfer rules and run the extraction again.
    Aaron

  • The extraction program does not support object

    I was loading data from R/3 to BW through a Generic Data source.  Previously it was loaded successfully but when I loaded last time, there was an error
    "The extraction program does not support object <Data Source Name>"
    Can somebody help me out please?

    Hi,
    Please check this.
    Loading Problem
    Regards.

  • The extraction program does not support object 0MATERIAL

    Hi All,
    can you please help me with the issue that we have for some of our Master data load.
    Full Loads are working fine, Delta Init is working fine as well. but Delta load is not the error is "The extraction program does not support object 0MATERIAL"
    already tried looking for some OSS note but none of them helps.
    hope anyone can help me.
    Thanks in advance,
    Alden

    Hi Christopher,
    Below is the reply that I got from SAP Consultant:
    I assume that this issue was happened after upgrade
    which is already mentioned in the consulting notes 1165059 & 1251433:
    -> 1165059 ALE: Generating and reading change pointers after Upgrade
    -> 1251433 SAPI: Creating and reading change pointers after Upgrade
    Can you have a look at these consulting notes to get more information
    in details about ALE changing and follow my recommended steps to solve
    this problem please:
    1. Can you check this affected datasource in table ROOSGEN in source
    system and you will find the generated Message Type in MSGTYP:
    ->Tx. se16 ROOSGEN:
    OLTPSOURCE SLOGSYS RLOGSYS MSGTYP ->???
    2. Then you can check this Message Type (RS*) in table TBDA2 and you
    will see that the flag (BDCP2_ACT) is missing here in table TBDA2 :
    ->Tx. se16 ->TBDA2:
    MESTYP ACTIVE BDCP2_ACT
    RS* X (empty!)
    3. If the flage (BDCP2_ACT) is missing here in table TBDA2:
    Then you have to do the following steps:
    ->start transaction SALE:
    Modelling and Implementing Business Processes
    Master Data Distribution
    Replication of Modified Data
    Activate Change Pointers for Message Type
    -> select the affected generated Message Type
    -> RS* ->deavivate and activate again
    Afterwards the missing flag should be set correct in TBDA2 again.
    Please check it first and then you can start the delta upload in
    your BW system side again. The data load should work correct now.
    After carrying out the above steps we were able to re initialize the master data.
    Regards and Thanks,
    Vivek

  • SL500 " this program does not support this system"

    I've an SL500 with windows 7 64bit system. It has a fresh system installed. I've installed all the necessary drivers correctly.Now I'm not able to install the followind items with system update utility:
    Thinkpad ultranav driver for windows 7
    Thinkpad hotkey features integration driver
    Thinkpad Ultranav utility
    If I try to install manually I receive an error message " this program does not support this system".
    Solved!
    Go to Solution.

    I had the same problem with Thinkpad hotkey features integration driver Version 3.84.1500
    (and the latest version 3.84.2000)
    It is a faulty installation!
    2 Files missing.
    Solution until Lenovo fixes the installation:
    Download and extract latest version.
    Download and extract version 3.81.0100.
    Copy the files SWI32.sys and SWIX64.sys from version 3.81.0100 to the corresponding folder of the latest version.
    Start setup.exe of latest version.
    According to the file properties SWI32.sys and SWIX64.sys are used as 'System Information Detector'.
    No wonder we get the error message 'this program does not support this system'
    Lenovo, please fix it.

  • Creighton Univ.'s Blue line program does not support Firefox 7. Can I reload firefox 5?

    I am an online student at Creighton U. It's Blue line program does not support Firefox 7. I cannot have this type of delay. Can I reload Firefox 5.

    Firefox 4 and 5 (plus 6 & 7) aren't supported by Mozilla. Best bet is Firefox 3.6.25 which is still supported.
    http://www.mozilla.com/en-US/firefox/all-older.html

  • SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

    when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
    OS: Windows Server 2008 Enterprise x64
    IE: 9.0 32bit
    webcient service is runing
    HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
    Anybody knows how?
    Thanks.

    Did you add your site to trusted site list?
    http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
    --Cheers

  • Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2

    I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer

    Hi,
    According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
    does not support opening this list with Windows Explorer.
    There can be multiple reasons for it.
    So, I recommend you can check with the following steps:
    Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
    Go to the “Services” of “Administrative Tools” >
    Ensure the “WebClient” service is started.
    Ensure that your computer has supported Web browser.
    Ensure that Internet Explorer is configured correctly to add
    https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
    Ensure that
    you have applied the latest updates on the system.
    For more information, you can refer to the following articles:
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Your client does not support opening this list with windows explorer - related to multiple uploads?

    Hi folks -
    I've read through some threads regarding "Your client does not support opening this list with windows explorer" and it seems a lot of folks have a lot of solutions throughout the forum posts.  Is there anything official or semi-official regarding
    this? 
    I've tried a lot of the fixes including:
    checking to see if the WebClient service is on
    modifying so-and-so registry (I've since changed them back since they seem to have no effect)
    and changing various settings in Internet Options including making sure the site is in the Local intranet zone.
    I could live without this functionality but just recently my upload-multiple-files functionality in SharePoint 2010 has also gone away (red x instead of directory UI).  I wonder if it's related somehow and could give us a clue.
    If it helps I'm using various browsers but of the IE flavor 8 and 9 32-bit as the base for testing this.

    For SharePoint 2013 (so could apply to 2010 as well), my problem was that I was trying to "Open with Explorer"
    something that probably can't be opened with Explorer. In my case, I just wanted to open my team's Shared Documents with Explorer. I found that when I first log into SharePoint and view the page, I'm presented with those Shared Documents, but also other things
    as well.
    To get "Open with Explorer" to work, I must click "Shared Documents" under the Libraries heading on
    the left. Then, all the other stuff (Links, Getting Started, etc.) go away and I'm focused on my team's shared documents. From there, I can go up to the Library Tools section in the ribbon, choose the Library tab in the ribbon, and click Open with Explorer.
    Works like a champ on Windows 7 64-bit, running IE 9 32-bit.
    Unfortunately that's not what was going on in my case.  One obvious way to check is to see if other people or other computers can Open with Explorer.  In my case it was just this one machine on my desk that had the issue.

Maybe you are looking for

  • ERROR: You entered a number which is lower than or equal to the package....

    Hi , I'm doing PREPARE for the upgrade to ECC60 from SAP 4.7 R1, but I have the following error in the phase of including patch. Any idea ? ERROR SAPup> Do you want to search for new packages in directory sappino\sapmnt\trans\EPS\in" first?        Be

  • Problem clearing Vendor items through F-44

    Hi Experts, While I am trying to clear the vendor open items ( via transaction code F-44) I get the error message which says "The entry EN 3  is missing in table 021T", with message # F5100. I tried to look up the Table 021T. It then prompts the erro

  • Oracle BI  Publisher installation - need help asap

    Hi, I have a laptop with Windows Vista Home Premium with service pack 1 and Mircosoft office word 2007. I have to write template layout for ORACLE Report. I went to OTN website and installed ORACLE BI Publisher DeskTop - bipublisher_desktop_windows_x

  • Applet doesn't show after plugin update & using JNLP, no errors

    We have an applet that worked after the plugin update, then I wrote the JNLP file and can't get it working, it seems to be loading but doesn't show anything. I have tried and searched for possible errors but doesn't seem to be any obvious error for m

  • Snow Leopard - Windows 7 - Parallel Desktop 5

    I have read and read on this topic but can't find what I am looking for. I have a MacBook Pro 13 inch 2.53 ghz 4 gb ram 500 gb hard drive. What should I get windows 7 32 bit or 64 bit? What are the pros and cons?