My CS6 download fails to install. I run windows 7

When I download the trial CS6 photoshop the download is OK but the installation fails at the end of the progress bar..

BK Pics please see Troubleshoot with install logs | CS5, CS5.5, CS6, CC - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific installation errors you discover to this discussion.

Similar Messages

  • Flash Player download fails to install at c:\WINDOWS\system32\macromed\flas

    Up until a few months ago flashplayer worked perfectly fine!  Now, it seems like every site I go to asks me to download it.  Everything goes fine when I click on download and a box pops up to "install".  When I click on install, it starts install and stops every time on   "registering:  c:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx"
    At this point I get the error message that tells me to go to adobe support and I have followed all of their instructions including uninstalling, downloading some SubInAcl thingy and another zip file and all that, I've reset my security settings, etc. etc.  I've emailed microsoft and adobe and haven't gotten anywhere with that.  Tonight I tried what the lady did with pasting that file onto my desktop and that didn't help me.  I also tried going into IE via safe mode and that didn't help.
    Anyone else have a suggestion???
    thanks, Gina

    illecrop wrote:
    "Note: Newer version already installed" (which is not true);
    This indicates that you have a newer version (11.8.800.175?) already installed, and you try to install an older version (11.8.800.174?) over it.
    What does your Control Panel / Programs & Features say is installed?
    Can you see the Flash animation at http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html ?

  • Bought a new iMac 27" yesterday.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

    I bought a new iMac 27" yesterday, running with Mavericks OS.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

    update manually,:  http://www.adobe.com/downloads/updates/

  • I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • Is it possible to install and run Windows Server 2008 on a Mac Mini Server in a Virtual Machine software like Parallels

    I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
    Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
    Thanks

    From the Parallels website:
    32-bit Operating Systems
    Windows 8 with: Windows 8, 8.1 (when available)
    Windows 7 SP1
    Windows Vista SP0, SP1, SP2
    Windows Server 2008 R2, SP2, SP1, SP0
    64-bit Operating Systems
    Windows 8
    Windows 7 SP1
    Windows Vista SP0, SP1, SP2
    Windows Server 2012
    Windows Server 2008 R2, SP2, SP1, SP0
    I do suggest that you upgrade RAM to at least 8gig
    if you haven't already.
    FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
    using the windows environment for engineering applications and have
    had no issues.  I am running Mountain Lion but do not have the
    Server app installed.

  • When updating iTunes to 11.4 I get the following error:  "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

    When updating iTunes to 11.4 I get the following error:  "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • ITunes 11.1.3 download fails to install for Windows XP

    Currently have iTunes 11.1.2.32 installed on a Windows XP SP3 PC. Control Panel lists version as 11.1.1.?. After downloading 11.1.3 install fails because "older version can't be removed". Uninstall of older version from Control Panel also fails.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • 8.0.1.5 Download fails on install

    Aloha -
    I downloaded the Linux 8051EE for Linux and my
    installation hangs on the copy of tnsping off
    of the CDROM I made. I took the original tar I
    downloaded and made two seperate CDS and they
    both hang in the same place.
    Anyone else experience this?
    I am desperately seeking Oracle for Linux up to
    date but Oracle won't send me the CD and the
    Technet download fails.
    HELP!!!
    Thanks in advance,
    Brett
    null

    the JNLS exception is a known bug. it can be ignored and the dbassist utility will work as best can be expected. as a tip, if you are not using OFA, at the end of the dbassist process - don't select the option to create a database straight away - choose the option to save it all as scripts. then check through those before you make your database with them.

  • [Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

    This is a copy of a post from my blog, you can also Read it on my blog...
    Introduction
    After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
    There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
    But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
    This guide may interest you if:
    You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
    You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
    What this guide will make you do:
    It will make you erase all your data from your external USB3/Thunderbolt hard drive
    It will make you install Windows on your external USB3/Thunderbolt hard drive
    It will make you install bootcamp drivers
    What this will not make you do:
    It will not make you modify anything on your internal Mac hard drive
    It will not make you use or install the bootcamp assistant
    It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
    What you'll need
    An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
    A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
    One of the following:
    Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
    A PC running Windows 7 or 8 → Read the important note below
    Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
    Download imagex.exe
    Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
    Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
    A USB stick to store your bootcamp drivers
    IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
    Step by Step guide
    Step 1: Get the install.wim file
    If you have a Windows ISO file:
    Mount the ISO
    If you're on OS X: double click on the ISO file
    If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
    If you're on Windows 8: double click on the ISO file
    Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
    Step 2: Clean, partition and format your external hard drive
    On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
    Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
    Type the following and hit enter to open the disk partitioner utility:
    diskpartType the following and hit enter to list your drives:
    list disk
    This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
    select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
    clean
    Create the boot parition by typing the following followed by the enter key:
    create partition primary size=350
    This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
    format fs=fat32 quick
    Set this partition to active by typing:
    active
    Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
    assign letter=b
    Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
    create partition primary
    Format the new partition in NTFS:
    format fs=ntfs quick
    Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
    assign letter=o
    Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
    exit
    Step 3: Deploy the Windows installation image
    Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
    Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
    imagex.exe /apply C:\wim\install.wim 1 o:
    This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
    o:\windows\system32\bcdboot o:\windows /f ALL /s b:
    If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
    If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
    Step 4: Boot from your external drive and install Windows
    Plug in your external drive:
    If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
    If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
    Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
    On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
    The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
    Step 5: Install bootcamp drivers
    Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
    Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
    Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

    Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • Oralce EPM Fails to install Weblogic on Windows Server 2008 R2 x64

    I've run the installer on Windows Server 2008 R2 x64 and it fails to install Weblogic. I don't have MIDDLEWARE_HOME/oracle_common. Config tool log says missing jars. When I go back to install and choose products individually, Weblogic Server is gray. When I click on Weblogic Server, the message at the bottom says can not be installed.
    I have checked that I have extracted the following assemblies:
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.0.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0.0 - Parts 1 - 4
    Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.0.0
    I have run this same set of files on another server and Weblogic was installed. Am I missing something?

    I am not sure if it is your problem but I don't think R2 is officially supported, I did have problems with it when I first installed 11.1.2 so I installed with R1 SP2.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Failing to Install iTunes on Windows - getting a msi message

    I keep getting the same message over & over again each time I try to INSTALL the updated iTunes. It will not allow me to sync my iPhone until this happens.
    While it is uploading I get a message that says:
    "The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below."
    So.. I go and find anything that says iTunes.msi which I've found three of on my computer.. THEN, after I select the source that it tells me to it then gives me another message that says:
    "The file 'the file I select' is not a valid installation package for the product iTunes. Try to find the installation package 'iTunes.msi' in a folder from which you can install iTunes."
    I've been going around in circles.
    This is so aggravating. This has been happening forever.. and I'm not able to download any movies or video. What's going on?
    Would someone please help me please?
    I never get an answer on these 'Apple Discussion Posts'.. so can I please get a reply that will help?
    Thanks.

    This kind of msi problem can usually be fixed with the Microsoft Installer Cleanup Utility.
    Unfortunately the Microsoft Installer Cleanup utility has been withdrawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
    Google msicuu2.exe download
    mydigitallife in the above search has a copy of version 3
    Check for malware before installing it.
    After installing, To run the program – All Programs>>Windows Install
    If you get permission denied error, Try Run as Administrator – an option if you right click on the program.
    Run the Clean Up utility and remove any instance you find of iTunes.
    Then try installing iTunes again.

  • Do i install os x mountain lion on my pc? Do i buy cd drive of os xmountain lion to install pc running windows 7?

    I have a personal computer of following configaration :, I have a personal computer of following configaration : intel core i3 processor,4 gb ram, foxconn ddr3 motherboard,1 tb hard drive,dell monitor.i want to install os x mountain lion.do i install it?if i do ,how to install it? Is it possible to buy a os x cd drive?if possibe,how to install it? Help me to use ox xmountain lion in my pc.

    intel core i3 processor,4 gb ram, foxconn ddr3 motherboard,1 tb hard drive, dell monitor
    The reason Win 7 looks bad is because of your poor monitor.
    I run Windows 7 on my 1920 x 1200 pixels 17" MacBook Pro and it looks just as good as OS X.
    The secret is to get a monitor with high pixel per square inch resolution, then any picture or graphics looks great.
    Nearly all the available eye candy on OS X is available on Windows with hacks.
    http://sourceforge.net/projects/mcsoft/
    Windows has more software and it's versions are supported for a decade on average, the hardware is significantly less expensive and in the towers, customizable.
    Apple just displays all fancy in one package and then charges 3x the price for the same performance as a PC.
    Your not missing much, there isn't any compeling need to run OS X on your PC, it's a hassle anyway.

  • HT1899 Can I install and run Windows XP on my MacBook Pro 13in. OS X 10.7.5?  If so, where can I buy it?

    I'm planning to use my macbook pro to record music, but some of the programs I will be using are only compatible with Windows.  I was told that it was possible to install & run windows XP onto my macbook pro by using Bootcamp.  I just don't know how fullproof or problematic this might be, or if it has even been successfully attempted yet.  Please help!
    Thx, K

    You can use XP with 10.7.x by installing XP when the Mac is operating from OS X 10.6.8. It can then be up graded to 10.7.x. Below I have reproduced the "Hatter " method instructions that I have used successfully. If your MBP cannot boot from and install 10.6.8 then it is a no go situation.
    Upgrade 10.6.8 to 10.7 or 10.8
    Use a maintenance utility like Yasu or Cocktail to prepare existing internal Mac OSX  HDD.
    Clone the internal Mac partition to an external HDD with SuperDuper or Carbon Copy Cloner.
    Restart from the cloned external HDD and select it as the startup volume via System Preferences / Startup Disk.
    Install 10.7 or 10.8 on the cloned external HDD replacing 10.6.8 or 10.7.x.
    Install 10.7.x or 10.8.x updates on the external HDD
    Restart the updated 10.7.x or 10.8.x  external HDD and test and adjust the preferences if needed.
    When satisfied, clone only  the 10.7.x or 10.8.x  external HDD back to the existing internal Mac HDD replacing 10.6.8 or 10.7.x  but don't include the recovery partition.
    The Boot Camp partition will not be altered as to drive id which appeared to cause problems for a few people.
    The recovery partition will be on the ext HDD and can be used for trouble shooting. A more convenient way to have the recovery/reinstallation environment is to create a Lion install USB thumb drive.

  • 12.1 failed to install. Error7 (windows error 193). What is the cause?

    Installation began ok but failed to install correctly

    michaelcrty, I have the same problem with the same error codes. Installed, uninstalled, and reinstalled multiple times. Still the same error message every time.

Maybe you are looking for

  • How do I know whether my Movies are on the cloud?

    When I move them out of the Media folder, they don't play.  I activated iCloud on iTunes and it synced my content to the cloud.  Was that music only?  Am I wrong to think movies will stream from the cloud (if not, what's the point of the cloud)?  If

  • My macbook suddenly is running very slow

    Help! my macbook suddenly became painfully slow, it freezes every 30 seconds. I took it to the Apple store, they said the hard drive was fine, they restored it and updated the operating system. At first it was a little better, but it came as slow as

  • Indesign Crashes when exporting PDF

    Hi, We are experiencing an issue when exporting an .indd file as .pdf. The process gets as far as a certain page (8 out of 13) and then crashes when reading a pdf image from that page. It does one of two things - it crashes or displays an 'out of mem

  • Maximum number of Mappings per Module?

    Hello! Is there any (techical) limit how many mappings there can be in one module? Cheers, Ykspisto

  • Itunes won't open ? appears on icon

    I emptied my trash one night and the next day I could not open Itunes. A ghostlike ? appears on the icon for Itunes in my tool bar. WHAT did I do? How do I fix it? Please help.