My current Etre check , please help to see what i should do
Dear Apple community,
my computer is slowing down... please tell me what i should do to upgrade it... im thinking of changing the graphics card and upgrading more ram.
EtreCheck version: 2.1.6 (109)
Report generated January 19, 2015 9:40:40 AM GMT+08:00
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2-core
8 GB RAM
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 370
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Time since boot: 54 days 19:1:2
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (116.64 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.gct.driver.gdmuwm (1.0.8 - SDK 10.6) [Support]
[not loaded] com.nike.sportwatch (1.0.0) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Support]
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.printtool.agent.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist [Details]
[failed] com.apple.wdhelper.plist
[running] com.gct.dts.gdme2dn.plist [Support]
Launch Agents: ℹ️
[running] com.nike.nikeplusconnect.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[invalid?] com.rim.BBLaunchAgent.plist [Support]
[running] jp.co.canon.UFR2.BG.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.rim.BBDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
uTorrent Application (/Applications/uTorrent.app)
Dropbox Application (/Applications/Dropbox.app)
BlackBerry Device Manager Application Hidden (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
FlashPlayer-10.6: Version: 11.6.602.171 [Support]
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 11.6.602.171 Mismatch! Adobe recommends 16.0.0.257
SharePointBrowserPlugin: Version: 14.0.0 [Support]
Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
GoPhoto.it V9.0 [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
50% SyncServicesAgent
24% Microsoft Database Daemon
15% Google Chrome
11% WindowServer
5% Microsoft Outlook
Top Processes by Memory: ℹ️
206 MB Skype
189 MB mds
172 MB Google Chrome
146 MB Microsoft Database Daemon
112 MB Microsoft Outlook
Virtual Memory Information: ℹ️
3.31 GB Free RAM
2.06 GB Active RAM
1.89 GB Inactive RAM
1.33 GB Wired RAM
59.22 GB Page-ins
694 MB Page-outs
Back up your Mac, if you have not already done so. To learn how to do that read Mac Basics: Time Machine backs up your Mac.
You inadvertently installed adware. Eradicating it is simple and you don't have to download or install anything to fix it. For an explanation or how this may have occurred, how to avoid it in the future, and for Apple's recommended solution read How to install adware.
You are running a torrent client. Doing so will leave you vulnerable to malware, data theft, or both.
OS X's Gatekeeper has been disabled. This basic Mac security feature is an essential defense against malware intrusion. To re-enable it read OS X: About Gatekeeper - Apple Support
That Mac has been affected by MacPaw "CleanMyMac". Read below.
It is not reasonable to expect a Mac to operate normally after using CleanMyMac. Like many ill-conceived "cleaning" utilities, it is capable of corrupting a Mac to the point that erasing it completely is the only practicable means of recovery. CleanMyMac is not the only example; it is merely popular due to marketing strategies that are as effective as they are intrusive.
There is no practicable way to reverse the effects of having used CleanMyMac2 other than to reinstall all affected files from backups or their original sources. Its developer's uninstallation instructions are ineffective despite their recent claims to the contrary. Only MacPaw, its developer, can know the reason for that, but I can think of two possibilities: either they are purposefully leaving components behind for reasons known only to them, or they simply don't know what they're doing. Neither one of those possibilities is particularly comforting for the user.
Reinstalling OS X alone will have no effect on either removing CleanMyMac or reversing the damage it is capable of inflicting upon a system. Follow the applicable recovery procedure below:
If you have a backup that you created prior to using CleanMyMac, now is the time to use it. For Time Machine, boot OS X Recovery, and at the Mac OS X Utilities screen, choose Restore from Time Machine Backup. Choose a date preceding the installation of CleanMyMac.
If you do not have a backup that predates the use of CleanMyMac, create one now. To do that read Mac Basics: Time Machine backs up your Mac.
The recovery procedure will require that you erase the Mac using OS X Recovery, and then create a new user whose contents will be empty. You will then be able to use Setup Assistant to migrate your essential documents including photos, music, work products and other essential files.
When doing so, select only your previous User account and do not select "Applications", "Computer and Network Settings" or "Other files and folders". De-select those choices.
Subsequent to using Setup Assistant, you will need to reinstall the essential software you may require, once again remembering to install software only from their original sources, and omitting all non-essential software.
To erase and install Mountain Lion read: OS X Mountain Lion: Reinstall OS X - Apple Support
To migrate your essential documents read: OS X Yosemite: Transfer your info from a computer or storage device and follow the procedure under Transfer info from a Time Machine backup or other storage device. The procedure is identical for Mountain Lion.
Similar Messages
-
Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.
Hi Romantilizer,
Hook your phone up to iTunes on the computer you sync with and do your update from there. This is a robust iOS release, and doing it OTA is not always successful. I tried on my iPhone a couple of times, and it aborted the update twice. Did it via the Mac, and it was fine.
It takes a bit of time, so hook it up, make sure it is updating your phone, and then find something else to do for a couple of hours.
Cheers,
GB -
Can somone PLEASE help me! what if i have forgotton my previous apple id password and i need to sign out
Did you just update your AppleID with new email address or did you create a new AppleID?
marleypre@1 wrote:
I am the origional owner of the ipad, i changed my apple ID and my Ipad keeps on thnking its on the old apple ID and it asks for the password every 5 minutes,
See this -> https://support.apple.com/en-us/HT203828 -
I bought new iphone 5s locked after i unlocked my iphone5s . when I switch on my phone it says enter your apple id but i forgot my icloud username. I cant access anything in my iphone. please help me? what shall i do .
kitan47 wrote:
I bought new iphone 5s locked after i unlocked my iphone5s
Was it Officially Unlocked by the Carrier it was locked to...?
If so... who is the carrier..? -
my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?
Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
What should I do if annemen the Macbook Pro does not want a USB stick? Please Help me?, What should I do if annemen the Macbook Pro does not want a USB stick? Please Help me?
What are you talking about? What is annemen? Clarify.
-
Please help me! What can I do to stop receiving lots and lots of emails with all participants questions? I tried what was suggested but it didn't work.
You got your answers in this thread here and you marked it as correct.
https://discussions.apple.com/message/16541734#16541734
When you get to the email preferences page to make the changes, did you click on "Save" at the bottom of that page to lock in the changes that you made? -
Please Help , Cant see flash objects
I cannot see certain flash objects. some games and videos i can some not. I was reading another person changed their storage settings And I remember I had to do something with my manager so I went back to the flash manager to check my settings and I CANT SEE IT! It is a blank space......Please help.
I GOT IT! Somepone else posted a link to manager and it worked for me...I had to allow 3 rd party settings.... Thanx....
-
2nd try and installation still fails at filesystem check PLEASE HELP
This is my second install of Arch.....and it failed again. It said it could not locate the super block for /root. I used the by-label naming scheme and had a /boot, swap, /root and /home directory. /root and /home were both ext4, /boot was ext2. For some reason when checking file systems it could not locate the superblock on /dev/disk/by-label/root. When i tried to use the by-label to replace the superblock it could not be found so i had to use /dev/sda3 (which was /root) I tired several different superblocks (located with systemrescuecd-testdisk) with no success. obviously i am doing something wrong and i would really like to fix it....when i try to access /etc/fstab it says permission denied....i was going to try and rename them by uuid but if i cant get in here i dont know how i would. i already got the uuid for each partition its just a matter of assigning it in fstab now i think.......i really dont wanna give up on arch so please help me out.
JoeKer1086 wrote:This is my second install of Arch.....and it failed again. It said it could not locate the super block for /root. I used the by-label naming scheme and had a /boot, swap, /root and /home directory. /root and /home were both ext4, /boot was ext2. For some reason when checking file systems it could not locate the superblock on /dev/disk/by-label/root. When i tried to use the by-label to replace the superblock it could not be found so i had to use /dev/sda3 (which was /root) I tired several different superblocks (located with systemrescuecd-testdisk) with no success. obviously i am doing something wrong and i would really like to fix it....when i try to access /etc/fstab it says permission denied....i was going to try and rename them by uuid but if i cant get in here i dont know how i would. i already got the uuid for each partition its just a matter of assigning it in fstab now i think.......i really dont wanna give up on arch so please help me out.
...Wait a sec. i am not going to make fan of you.but i must ask this for sure..
you know? "/" (pronounce root) is not /root. you need / . Did you make / ? if you dont have / you cant set /root as a system. i dont know what is the matter of superblock by the post (no enough info). well, i am asking where is the / because you didnt mention this at all. maybe you created / and call it /root?
try it more simple. you only need / and swap partition to install(after you finish installation you can make rest of partitions if you have space)
the point of Arch installation is you better finish it as simple as you can, then setup others after you boot from Archlinux.
Arch installer is far from perfect. (just it is enough to complete installation) -
Button click without "refresh" the current page. Please help
Hi everyone:
Here is my code:
Code:
<HTML>
<HEAD>
<TITLE>Parallel Port</TITLE>
</HEAD>
<BODY>
<H1 ALIGN="CENTER">On/Off Bit0 of server's parallel port</H1>
<form name="myform" action="robotcontrol.jsp" method="POST">
<input type="hidden" name="action" value="<%=action%>">
<INPUT TYPE="SUBMIT" VALUE="set/reset">
<jsp:include page="./VideoToApplet/htmlroot/index.html" flush="true" />
</form>
</BODY>
</HTML>
everytime i click the button, it will perform (set/reset) parallel port, and i have include a html page which consist a video streaming applet.Maybe cause of this:
<form name="myform" action="robotcontrol.jsp" method="POST">
So.. please help !! Thanks in advance.
but unfortunately, everytime i click on the button, it will likely refresh the page, and the applet will auto reconnect to camera,(it take time to reconnect)..Inside the body of JSP/HTML page, at the end of <BODY>, paste this small script.It will refresh your page automatically after 20 seconds, that is nothing but the value assigned to V.You can assign the time interval as you wish.
<SCRIPT language="javascript">
var ONESEC = 1000 ; // One second (in ms)
var V = 20 * ONESEC ;
var ONEMIN = 60 * ONESEC ; // One minute (in ms)
var INTERVAL = 1 * ONEMIN ; // How often is page refreshed (in ms)
window.setTimeout(function(){
window.location.reload() ;
},V) ;
</SCRIPT> -
The cover art does not show on My iTunes library even when I'm playing it. The cover art does not show in Word press either when you open it on a laptop. But I think I used a feed burner for the podcast and that's why the word press done now has come up. My question is that iTunes have Successfully I did my podcast however my son now is not my heart and I need to change that. Can anybody here please help me? I think it has something to do with the feed burner or potentially the way I have uploaded. I uploaded the podcast directly into WordPress I did not use any other hosting sites like libsyn.
Giansh2006 wrote:
I don't quite understand why you have asked me about why I'm keeping my URL secret?
It's only that I'm not clear why you are reluctant to post it. If you have a podcast in the iTunes Store then it's there for the world to see - they might search on its subject or title, for example, even if they don't actually know about it from you. If you look at other posts in this forum you will see that usually people post their URLs and then I can examine the feed and hopefully find out from that what the problem is. Without this information no-one can give you anything more than wild guesses.
If you are still reluctant to post the details and want to have a bash at diagnosing the problem yourself you may find my web pages helpful:
How do I make a podcast?
how to diagnose a podcast feed
Why don't my podcast episodes show the podcast image? -
I have no way of checking to see if anyone answers this. Why does Firefox have to make it so difficult?
What does this means: DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
Suddenly all my tabs closed. Then Windows told me I had a gazillion infections. Then a tiny strip appeared saying it was Firefox and these little blocks started to fill up the little strip as if it were downloading something--there was no way to cancel this so I cut the power. Now when I try to use the Firefox icon, I get the message above.
Am I supposed to remove the old Firefox stuff and start from scratch? I am stuck using Internet Explorer.
I went to the Firefox website and tried to download it again, but McAffee jumped in and said there is something wrong with Firefox and I should register with them that I am downloading Firefox (I do not have McAffee). Then I got a security warning saying Firefox is not safe.
I am completely at a loss as to what to do next, since I don't understand any of this mumbojumbo.Here's the story on one of your infections, namely JS:Redirector-EH[Trj]: http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Trojan%3aJS%2fRedirector.H
The main problem with malware is that it uses the installation to proliferate by contacting hostile servers to download more of the same rogue code.
Firefox doesn't have the option to "Run" a file. You can only "Save File" or "Cancel". If you downloaded it with IE8, then yes, you can run it, but that's not what I wanted you to do.
What you should do now is to disable System Restore. You can open System Properties by hitting the Windows logo key and Pause/Break key together. Then click the "System Restore" tab. Then checkmark the box which says "''Turn off System Restore on all drives''". Reboot to clear its contents. System Restore unfortunately makes a backup of all executables which includes viruses so that when you reboot without deleting them first, System Restore reinstates them again.
After you complete that step, run Avast and Malwarebytes again to make sure the system is clean.
Then go to the Windows Update site (link on your start menu) and install the missing patches which enabled your machine to become infected in the first place.
Once the system is clean, repeat step one to download Firefox again, but please do not run the file. If you don't see the option to "Save File", cancel the download, but it should be there. You can use this direct download link to download FF4.0.1 [http://www.mozilla.com/products/download.html?product=firefox-4.0.1&os=win&lang=en-US Download Firefox 4.0.1]
Run the file after you download it to the desktop. -
Could you please help me to fix my iPhone 4S
After the latest update we've had to iOS 6, I was not able to use FaceTime, it kept giving me an error that I was supposed to wait for an activation code which never arrived, after that I read many solutions which included resetting the networks, which I did to try and fix my problem. What this actually did was to break my network settings an now it doesn't recognize any wifi signal unless I have the router next to me and even the it is difficult.
Now I don't have FaceTime or access to wifi with my iPhone!
Please help me!Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
PLEASE HELP!!what is the function of this keithley output source VI?
i would like to know what does "trigger delay","sour delay","NPLC","arm count" do in this example.Please help!! thanks!!=D!!
Attachments:
24xx Swp-I Meas-V gpib.llb 687 KBI didn't open your example (I'm not at my work computer), but here is an explanation of the terms:
Trigger delay is the amount of time between a DMM being given a command to take a reading, and the actual reading being taken. Lets say you want to read the voltage on line A exactly one second after the voltage on line B goes above 2V. You set the DMM for external trigger with line B connected to the external trigger input on the DMM. THen set Trigger Delay for 1 second. Then send the command to read the DMM (Read?). The DMM will become armed (waiting for trigger). When line B goes above 2V, the DMM will wait one more second, then read line A. If you don't want to wait to take a reading, set the trigger to immediate.
Sour stands for source. I've never heard of source delay.
NPLC is the Number of Power Line Cycles. In the U.S., we use 60Hz power (50Hz in Europe), so one power line cycle is 1/60 seconds. When setting NPLC, the DMM will take continuous readings for that length of time, then take an average of all the readings and return this value. Setting NPLC to 10 will make the DMM take readings ofr 10/60, or 1/6 seconds, and return the average of all readings. How many readings can be taken during that time interval depends on the DMM, the range setting, and the resolution setting.
Not sure about "arm count", but "arm" means that the DMM has been given a command to read but has not yet received the trigger to take the reading.
Reading a DMM through GPIB involves a series of events: Arming (GPIB command to read or measure), triggering (immediate or delayed, internal or external), measuring (one measurement or several for averaging), then returning the measurement.
Message Edited by tbob on 05-29-2006 11:54 AM
- tbob
Inventor of the WORM Global -
TS1277 I cannot connect to iTunes Store. Please help me find what happened.
I can not connect to I tunes store. I can not purchase or update apps.
Please help find what I'm doing wrong.I read on another discussion that apple are aware of the problem and working on a fix. I'm fed up with itunes I constantly have issues with it and it's not just me nearly everyone I speak to says exactly the same. Does anyone know of a decent alternative to it??
Maybe you are looking for
-
Can I have the same product installed in my two computers (home and office)?
Can I have the same product installed in my two computers (home and office)?
-
My itunes won't display any songs in the music store!
my ittunes won't show any songs in the store underneath the album info! HERE'S A PIC. <AHREF>http://www.pixentral.com/show.php?picture=1KvwTBYSDxVABnrfixAqhITNRs8CEC1</AHREF>
-
Location sensors not found after 3-7 days work
Good afternoon. I want a permanent job location sensors in my own program. Everything works fine about 3-7 days. But then SensorManager stops include location sensors. I make sure with it when I open any other program from windows Store using locatio
-
So I was trying to download the latest version of iTunes so I could watch the big game in better quality, and it seemingly downloaded successfully onto my drive. However, when I try to install iTunes Windows keeps telling me that it is not a valid wi
-
Pass collections into to select query on IN caluse
Hi friends, I wanted to pass collections in to select query IN caluse . Eg.. Declare type tab is table of varchar2(25); v_tab tab: type tab1 is table of varchar2(25); v_tab1 tab: Begin select ename into v_tab from emp where deptno in (10,20,30); sele