My cursor is jumping all over the page

For no apparent reason all of a sudden I can not control my curser with my touch pad on my MacBook Pro
Tried cleaning it tried rebooting it but still I am not able to control the curser
Any ideas

Hello Fred,
It certainly can be inconvenient and frustrating when your trackpad is acting erratically. I recommend reviewing the following article for an issue like this:
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/ts1449
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

My magic mouse keeps jumping all over the page

Hi, my magic mouse keeps jumping all over the page and random apps keep appearing on my screen when I'm in facebook and it keeps sliding onto my dashboard screen.

Thanks so much for replying Barry. Did what you said but took me 6 attempts to be able to reply to you so unfortunately did not work. Have to wait over a week to get into Apple store so I guess I've just got to wait. This is my second magic mouse and its driving me crazy. Touch pad also playing up but thanks for the advice and have a good day.
Megs

My cursor keeps jumping all over the place in Mail since I installed Yosemite

I installed Yosemite yesterday, and now, whenever I try to write an email, my cursor keeps jumping all over the place. I can't write more than a few words without my cursor jumping back in the middle of one of the previous words. I makes Mail almost unusable. Am I the only one with this problem?

Similar problem. Mine seems to happen in mail - my cursor jumps to the line below and carries on typing - almost as if I'd pressed the down arrow to move the cursor. It seems to happen more when I type an apostrophe too.

When in organizer how do I keep my cursor from jumping all over the place?

When I am working in Organizer 12, My cursor jumps all over the place and the screen keeps repositioning itself. It is infurating and I can't get any work done. New desktop iMac using Marevick 10.9.1 and wireless mouse and track pad both slowed to lowest level. Also tried using a tethered mouse but no different. Anyone else have this problem. Is it an Apple problem?

Is it a 'Magic Mouse'? If so that's why, there are many reports that it is badly behaved in the Elements Organizer. If not, do you have another mouse you could try it with (to rule out a hardware problem)?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

My cursor is jumping all over the screen

I use the mouse on my computer and when I go to move it it jumps all over the place.

HI..
Try restarting your Mac.
And check your settings in System Preferencds > Mouse
Make sure Mouse keys is disabled in System Preferences > Universal Access > Mouse

Why is my page or connection jumping all over the place after my recent update to firefox 5.0

I came back from a week away and when I got on the internet firefox had updated to 5.0 and ever since then my pages just jump all over the place Why?

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

Does anyone know why my mouse cursor jumps all over the screen at times?

Does anyone know why the mouse cursor jumps all over the screen at times, especially if I am playing solitare? Is it Yahoo games or my Apple?

Is this a Magic Mouse you're talking about?
If so there's already discussions about this here and maybe related to it, here. Also google something like "jumping magic mouse" and there's no end of discussions on this topic

How can i stop Pages and Numbers JUMPING ALL OVER THE SCREEN. MAKING ME SEASICK! PLEASE HELP

how can i stop Pages and Numbers screen JUMPING ALL OVER the place when i just touch my mouse. i have tried and tried to change the mouse settings - but it is the software. especially Numbers. you can't even see what the page size is until you print. i am so SEASICK! PLEASE HELP.

Thanks for the trouble to reply. this problem only happens with Pages and Numbers for me. i have done all the tricks like restarting. the main problem is that the working space is not 'stable' - it has no 'ends' even on full screen. in Numbers - UNLESS I SET IT TO 25% VIEW (which is way too small) - the actual total 'work space' is way off the grid - so every time i move the mouse the table i am working on zooms off to left or right, at the slightest touch. i have set my mouse to no gestures!
the thing is this did not happen before the latest upgrades.
but thanks anyway. SG.
if you are a techy person - i have another prob. in Mail i am unable to set the SORT / VIEW messages to BY DATE.
(it used to be ok, at one time, too). now it continually reverts to BY SUBJECT oh so annoying !
restarting etc does not change it. resetting preferences does not change it.
maybe i need a new Mac ?
mine is a 27-inch, Mid 2011. running latest.

Satellite C600 - Cursor jumping all over the screen

I was just issued the Satellite C600 and I cannot type without my curser jumping all over the screen. I've followed the advice from other threads with no success. "FN+F9" does not disable the touchpad, and there is no touchpad tab under Mouse Properties. In fact, when I search the whole computer for "touchpad" there is no response.
Please advise!

Hello
Why you try to disable the touchpad?
On Satellite C series there is a BIOS update that will solve this cursor jumping issue. There are already a lot of threads here in forum:
http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm
Check this!!!

My cursor jumps all over the screen. Any input?

My cursor jumps all over the screen, any input?

Reset your SMC ( System Management Controller )
http://support.apple.com/kb/ht3964
This fixed my macbook jumpy mouse.

Why is the webpage jumping all over the place with parallax scrolling?

Hi all, I'm getting a little frustrated here... I've built a looooong (10,200 pixel) parallax scrolling site, when I click 'Preview' it plays like a dream, but when I render the HTML, view in browser or publish to business catalyst to view, it just jumps all over the place. I realise that the page is extremely long, I'm thinking it could be that but just need to clarify it before I rework it all and maybe find out after, that it was something else that was causing it to happen.
Your views would be greatly appreciated!

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

My screens keep jumping all over the screen and changing size while I am trying to work why?

My opened pages keep jumping all over the screen and changing sizes while I am trying to work - what is causing this?

Madafk wrote:
.... - I really love this Mac but it is taking a bit of getting use to
Cheers
You may find these Links helpful in enjoying your Mac...
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
Find Out How (Video)
http://www.apple.com/findouthow/mac/

Mouse is Jumping all over the screen...

I have been having all kinds of problems with my mouse. The one on my computer will at times not respond to touch... I thought I had fixed that by wiping it down but it still isnt great...
Then my mouse started having the cursor jumping all over the screen... I ended up going and buying a Magic Mouse as the guy at the store said my mouse was going bad... Well I have been great with the magic mouse for about 24 hours and now it is starting to do it again...
Any ideas of what I should do?

Buy a Logitech Bluetooth mouse!! I have had no problems with my Logitech...it seems like more people have problems with the mighty mouse and magic mouse. That is my opinion. I have this mouse:
http://store.apple.com/us/product/TQ089LL/A?fnode=MTY1NDA1Mg&mco=MTA4MzgwNzg

My mouse keeps jumping all over the place and i dont know why!

My trackpad doesnt allow me to fully control the mouse on the screen! it keeps jumping all over the place and i dont knw why! i updated my computer yesterday and it was working fine but by the end of the night it started to not function properly again.

A fairly well known flaw that occurs to some trackpads. See here: http://support.apple.com/kb/TS1449

My cursor is jumping all over the page

Similar Messages

Maybe you are looking for