My Curve 6 not coming on but led blinking

Hello,
I am having issues with my blackberry curve 6. The battery drained, and since then its not coming on. Even tried a another battery, but still not coming on. The led only blinks like foru times, takes like 5seconds, and blinks another four times ad infinitum, but not coming on! Help please.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Laptop not starting up but rather blinking

    My laptop just blinking. Nothing responding. All happened suddenly. I unplugged AC power removed the battery and pressed the on bottom for 30 s and then on but the problem was the same. My windows was 10 upgraded while this problem happened hoped this problem would be terminated.
    I was trying to turn 3d max on when this problem started. I doubled click on the software icon and waited to start and this small circle started to turn but suddenly blinking started and icons disappeared. Since then, only blinking and I realised that the internet went off as well
    Need help please to sort this problem

    "‎10-15-201401:55 PM
    If the board is dead.. The laptop should not start..
    But it start and suddenly off without any display.."
    oh, okay. good luck.

  • Some of my calls are not coming through but going straight to voicemail....anything I can do?

    Some calls are coming in and some aren't. Is there something I should do to my phone or is this a network issue?

    Try resetting your network settings.
    Settings > General > Reset > Reset Network Settings
    If this doesn't resolve it, contact your wireless carrier for assistance, as the problem is most likely with the network, not your phone.

  • My BB Curve will not turn on; red light blinking

    My bb curve 8330 will not turn on, charge, or do anything other than flash the red light at me. I tried removing the battery and have tried charging it, but nothing seems to help. Any ideas?
    Solved!
    Go to Solution.

    Nevermind, I resolved the issue by removing my memory card.

  • Cisco 4503 "1000BaseLH" SFP light is not coming ---- Urgent

    Dear Team,
    I have Cisco 4503 and I have inserted 1000BaseLH and light is not coming up but for 1000BaseSX its fine.
    Please suggest.
    CORE#show int GigabitEthernet1/18
    GigabitEthernet1/18 is down, line protocol is down (notconnect)
      Hardware is Gigabit Ethernet Port, address is 001e.4aa6.b891 (bia 001e.4aa6.b891)
      MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, Auto-speed, link type is auto, media type is 1000BaseLH
      input flow-control is off, output flow-control is off
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input never, output never, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         Received 0 broadcasts (0 multicast)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
         0 output errors, 0 collisions, 0 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    CORE#show inventory
    NAME: "GigabitEthernet1/18", DESCR: "1000BaseLH"
    PID: TRF5735AALB202    , VID: A1 , SN: OPA11241478
    Thank You,
    Abhisar.

    Dear Reza,
    we connected cable and it came up. The conclusion is single m9de sfps does not show light where multimode sfp shows light when sfp is connected on switch port.
    Thank you for your suggesion.
    Thank You,
    Abhisar.

  • BP Details not coming properly in BP search results for editing

    Hi,
    Can anyone help me to solve the below issue.
    When i tried to search the BP for editing in IC WEB UI(7.0 ehp 1 version) by using the accounts & products, and a/c management work centers in IC AGENT business role  i am not getting the complete BP details in the search option like all the assignment blocks are not coming.
    But when i tried to search the BP for editing by using the SERVICEPRO & SALESPRO business role i am able to get the full details of the BP.
    Can anyone help me why the BP details are not coming for search criteria in IC AGENT Business role.Is ther any customizing settings i missed out.
    Thanks in advance
    Regards
    Nagaraju

    Hi Nagaraju,
    This would be because only restricted view is provided to IC Agent when compared other roles.
    You can check the view configuration.
    Regards
    Leon

  • Cisco 4503 "1000BaseLH" SFP light is not coming

    Dear Team,
    I have Cisco 4503 and I have inserted 1000BaseLH and light is not coming up but for 1000BaseSX its fine.
    Please suggest.
    CORE#show int GigabitEthernet1/18
    GigabitEthernet1/18 is down, line protocol is down (notconnect)
      Hardware is Gigabit Ethernet Port, address is 001e.4aa6.b891 (bia 001e.4aa6.b891)
      MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, Auto-speed, link type is auto, media type is 1000BaseLH
      input flow-control is off, output flow-control is off
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input never, output never, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         Received 0 broadcasts (0 multicast)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 input packets with dribble condition detected
         0 packets output, 0 bytes, 0 underruns
         0 output errors, 0 collisions, 0 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    CORE#show inventory
    NAME: "GigabitEthernet1/18", DESCR: "1000BaseLH"
    PID: TRF5735AALB202    , VID: A1 , SN: OPA11241478
    Thank You,
    Abhisar.

    Thanks Marvin,
    It is solved.
    https://supportforums.cisco.com/discussion/12464296/cisco-4503-1000baselh-sfp-light-not-coming-urgent
    Thank You,
    Abhisar.

  • Laptop not coming up after PC refresh

    Hi,
    My Laptop was not connecting to N/W, so did the PC refresh. After PC refresh is started Blinking and never came up. I did hard reboot but no success. Please advise how to recover my laptop without losing my data. It would be of great help.
    Please advise if any solution or How can i reach support team. I have registered my Product with HP but now my details are not there and it say my actual mail not found, However i do have registration confirmation mail with me.
    Please help appreciate your help on this.
    Thanks & Regards,
    Prashant

    Hi there @yspylp 
    Welcome to the HP Support Forums!
    I understand that you are getting a flashing code error and that you are understandably concerned about your data.
    I am happy to assist you.
    Firstly I would recommend that you try to backup your data to an external device before doing anything else. This page shows a few methods you can try.
    How to Recover Data from the Hard Drive of a Dead Laptop -wikiHow.com
    Once your data is safely backed up, you can try calling in to technical phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    The other option would be to post some more details about what you are seeing on your computer, the flash codes you are getting can help identify the source of the problem.
    Computer does not start and the LEDs blink or the computer beeps
    Depending on the the error code you are getting, you may be able to address the problem yourself, but if it suggests a board problem then you will definitely need to call phone support.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Portal  not coming up

    HI all,
    When i am trying to access the portal URL it is not coming up.But the netweaver home page is coming.Other than that no other page is coming up.

    Make sure you are using a full host name in the URL http://aaa.bbb.ccc:50000/irj

  • Power LED Blinking Orange/White..Hardware problem?

    Power LED Blinking Orange/White.
    i am using a compaq cg56-102tu laptop. i wont turn on and nothing happens when i press the power button and theres a blinking orange and white light at the power indicator LED when the battery or ac adapter is connected..
    courtesy of vaiost
    it is like that when i plug the laptop on an outlet with or without the battery..it is the same when i only use the battery but it starts blinking when i connect the battery even without pressing any button..Any ideas?

    Hello @NoGameNoLife,
    I have read your post on how your notebook computer is not able to power on, and I would be happy to assist you in this matter!
    Since there is a blinking orange light where the AC adapter plugs into your computer, I recommend following this document on Computer does not start and the LEDs blink or the computer beeps, as well as Using and Testing the AC Power Adapter. This should help to restore the power to your notebook.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Power led blinking

    I have a hp 5175ea, some days I can not turn on the computer by pressing the power button as it flashes without stopping.
    There is no sound, the fan is operating normally and the hard drive LED flashesnormally.
    The screen does not light up, and you can not press any button.
    What can be the problem? Highlight your reply soon thanks

    Hello @NoGameNoLife,
    I have read your post on how your notebook computer is not able to power on, and I would be happy to assist you in this matter!
    Since there is a blinking orange light where the AC adapter plugs into your computer, I recommend following this document on Computer does not start and the LEDs blink or the computer beeps, as well as Using and Testing the AC Power Adapter. This should help to restore the power to your notebook.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HT3964 My Macbook air charges intermittently. At times when I connect the power adapter it shows that power is coming in but  says "not charging" and the led light on the power adapter does not light. At other times it charges normally. Any ideas?

    Hey guys,
    I am having problems with charging my mac Air.  Sometimes it charges perfectly but then at times much as it shows that it's getting the power from the charger, it says "not charging" and the led light on the charger does not light up. Any help?
    Rgds,
    Kido-Vj

    That can happen when you are Taxing the system. No Apple supplied AC adapter supplies enough power to both power the system and charge the battery at the same time when the system is under Heavy Load, when you are Taxing the system heavily. At those times it will draw power from both the AC adapter and the battery at the same time. So if it is drawing power from both it can't charge the battery while it is drawing power from it.

  • What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

    I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

    Hi,
    When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
    I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
    I would contact Apple Support and check with them.  (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
    I did find this iOS: Troubleshooting Messages - Apple Support
    It starts off about sorting SMS that is not working.
    This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    7:55 pm      Tuesday; January 6, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    Hi Angela1313,
    I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
    iTunes Gift balances
    http://support.apple.com/kb/ht5035
    Learn more
    Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • IO assigned with Asset,but not coming at the time of PO creation

    Hello
    IO assigned with Asset,but not coming at the time of PO creation.
    I have made following settings:
    1     Depreciation - IFRS (INR)              1     0L
    15     Income Tax Act                             0
    20     Depreciation - Indian GAAP (INR)     3     1L
    30     Depreciation - IFRS (USD)              0
    31     Depreciation - Indian GAAP (USD)       0
    In ACSET-Account assignment:
    for dep area-20
    CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
    KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
    so currently i am using only dep area-20 only(Indian GAAP)
    CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
    AS01
    KO01
    AS02
    KO22
    KO30
    so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
    kind regards

    Hey Ajay
    thanks for your reply.....
    now i'm getting new error:
    Parallel depreciation area 31 is not posted
         Message no. AA565
    Diagnosis
         The asset to be posted does not manage parallel depreciation area 31, or
         transaction type  that you are using is limited to certain depreciation
         areas, and does not contain depreciation area 31. This is incorrect.
    System Response
         Posting is rejected.
    Procedure
         Check the asset and the transaction type.
    I have checked some configuration but not able to debug it.
    regards

Maybe you are looking for