My Curve Won't Turn On

Last night my phone was nearly dead but I placed it on charge. Through the night am guessing one of my dogs knocked the plug out. This morning I woke up the phone was dead. I placed it on charge and I got a solid red light from the led but its not turning on not matter what I do. I have done the battery pull out, the wall charger, the USB charger and it still is not turning on. What should I do?

Hi, I have a similar problem.
I tried to install BB App World on my Curve-8900.  It seems to have completed and asked me to reboot.  I accepted.  On restart, the red led would come on for about 10 seconds and that was it.  The screen is black all this time and never changed to anything else. 
I have tried battery pull several times even overnight and still the same: red led for 10 seconds and black screen only. 
I read somewhere that the system can boot in safemode by holding down the Return key on startup.  I tried that and this is what I noticed (the screen remains black all this time)...
1. It would start with red led for about 10 seconds then go off.
2.  I continue to hold the Return key.
3. After about 2 minutes the Red led starts to flash.
4.  I connect the Curve to my laptop and start BB Desktop Manager and it recognize the device.
5. I was able to do a backup.
6. The screen is still black.
Any idea?

Similar Messages

  • My Curve won't turn on and no sign of flashing red light

    Hi!
    I m all new to this blackberry forum thing....anyway i have a blackberry curve and all of a sudden yesterday it just stopped working. when i looked at the phone the screen was all white so i took out the battery and put it back on thinking that it will come back up but it didnt. Then i took the battery out again and plugged it to the USB(without the battery) because ususally it comes back up, but it still didnt. i put the battery again and plugged it to the USB thinking that it needs to charge but still no since of that flashing red light. I took the battery out and put my friends battery (cos he has a curve too) but still it didnt work. I did try holding down the power (red)button still not back on. 
    I just dont understand whats wrong with it, its not like i dropped it in the water or dropped it on the floor. I didnt do anything to it. It just stopped working. 
    Im really frustrated right now...I just dont know what to do..i hope someone can help me
    THanks!

    I finally got my curve to work.  I just left it on the charger for a while and then it powered up. It seems if its a little low on power and I don't charge it relatively soon it shuts down and won't power up for awhile. I've also updated the software and cleaned out the junk files. It seems to be working fine now, go figure.
    tm

  • My Blackberry Curve 9380's screen won't turn on!

    My Blackberry Curve 9380's display screen won't turn on!  The flashing red light still appears so I guess I am still able to receive texts.  I can also receive calls; my ring tone goes off but I cannot answer!  I have to unlock it and I can't do anything on a touch screen that's virtually useless now.  I've done so many battery pulls yet it doesn't work.
    I did drop it but it wasn't very hard.  My bb fell when it was in my rubber case and the fall was around knee length (I am very short only 5'0).  My friend said its possible that the backlight broke.  If it is true, how much does it cost to repair it?  My warranty expired a few weeks ago...
    My friend also said there could be something else wrong with it.  Like a downloaded an app that had a corrupt file (this has happened to me before and the phrase "Uncaught exception java.lang.error" kept popping up every time I did a battery pull) or a programming error. I tried Jl_Cmder and I've done reset to factory.  I've even tried to wipe everything completely.  "The device will reboot to a white screen with a '507' error" this didn't happen... It did reboot but nothing can be seen.  I regret it deeply ...
    I'm sorry this is so long but please can someone help me? ): 

    Ouch, that doesn't sound good. Even though it's out of warranty, you should check first with your mobile provider for a repair estimate. 
    Sorry!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Q10 Won't turn on tried all the suggestions

    Q10 started acting unresponsive, attempted to restore to original using the post here security settings.
    3 hours later it still wasn't finished apparently...took battery out, reinstalled....now it won't turn on.
    Plugged into wall charger, waited an hour removed batt (still pugged into wall) put it back....nothing.
    repeat, repeat , repeat...nothing
    Well once I got an orange light for a split sec.
    Any takers????

    Thank you but I don't know what you are referring to.
    Off to ATT device support as soon as I can. 
    Reactive my old unreliable BB Curve if the Q10 is dead.
    Hmm, a trend?

  • My BlackBerry Curve 8520 Wont Turn on With No LED

    My Blackberry Curve 8520 Wont turn on and there is no LED flashing, i have tried pretty much everything and nothing seems to be working, tried a new battery, tried using the USB and the mains charger, tried leaving to charge for 8 hours, is there anyhing i can do to fix it myself as i dont have themoney to replace the phone or pay for a repair
    PLEASE HELP ME
    Thank You 
    Nathan

    Hey hakmilton,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest contacting your network service provider to look at possible repair and exchange options.  Since you tried a new battery and the LED won't come on, we can not even try reloading the device software.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Battery symbol with a red x and my phone won't turn

    i have the curve 8520... it was working earlier today I changed my sim card so I put my phone shut off. After this when I switched on my hand set...... then I found a battery symbol with a red x and the phone is not booting OS.  I am not sure what that means but my phone won't turn on and won't charge. I tried taking the battery out and now it turns on but the symbol is still there and the loading bar is on the screen and it won't change. I also took outmy sim card & memory card. Please help me... 

    Hi AnupamSingh
    Welcome to Blackberry Support Forums
    Have you Installed any Application recently before this problem ? If you have then start your device on safe mode and uninstall or undo any changes that you think may be responsible for the problem ,Check this Knowledge base :
    KB17877 : How to start a BlackBerry smartphone in Safe Mode.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • I was syncing my iPhone5 to iTunes and then my phone automatically locked and now it won't turn back on

    I was syncing my phone to itunes and then my phone automatically locked and now it won't turn back on but when i plug it into a charger it makes the charging sound.

    Hi lemmag17,
    If your iPhone doesn't appear to be responding or turning on, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • K7N2 Delta ILSR won't turn off, just restarts

    K7N2 Delta ILSR won't turn off, just restarts.  Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.

    PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
    By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
    Now what?
    R.

  • [Help]iPhone 5s screen won't turn on / won't play sounds

    Hello, my name is Bryan.
    I've got a problem with my iPhone 5s. I opened my iPhone to fix an issue with the home button (Watched a guide on youtube on how to achieve this), and I connected everything as it is supposed to go, my home button is working but now my screen won't turn on or the phone won't play any sounds. I know the phone it's on because I can connect it to the computer and the computer recognizes it. Also, I tried calling it, and it rings on the phone I am calling from, but my iPhone simply won't play any sounds...
    I am also sure the phone is not in DFU mode.
    Any help?
    Thanks in advance,
    - Bryan

    It won't even vibrate or do anything, but it's on.

  • TS1741 Remote app on my iOS devices control my apple tv, but won't turn my newest gen apple tv on when i open the app.

    Remote app on my iOS devices control my apple tv, but won't turn my newest gen apple tv on when i open the app. It used to turn my previous gen apple tv on. Remote app controls apple tv just fine once i turn it on with the provided remote control. Help?

    Hello CournteyGould3,
    Congratulations on your new Apple TV!  I found an article with steps you can take when your remote app can't connect to the Apple TV.  I recommend following the steps in the article below (you can skip any steps you have already taken):
    Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/TS1741
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iPhone 5 won't turn on, the screen just stays black!

    My iPhone 5 won't turn on I have held the power button to see if it's dead or not and it doesn't seem to change the screen it just black I thought the battery could of died or something similar it only happened about 2 hours ago please help!

    Hey Thermali,
    Thanks for the question, and great troubleshooting so far. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • My iPhone 5 won't turn on

    My iPhone 5 won't turn on and won't restart or restore... any suggestions?

    Is the Battery Charged...?
    tammyschnitt wrote:
    My iPhone 5 won't turn on and won't restart or restore...
    See Here for  >  Frozen or unresponsive iPhone
    Try this First... No Data will be Lost...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My Iphone 5 won't TURN on or OFF it won't do anything it's just showing the Apple logo the WHOLE time Please help

    MY IPhone 5 won't turn on or do ANYTHINGS please help

    Plug into computer then hold the lock and home buttons until it syncs

  • My iphone 5 won't turn on but when plugged into power source it keeps showing apple logo?

    My iPhone 5 won't turn on at all and then when I plug it into a power source either into a plug socket or into my laptop with the USB cable it keeps showing start up screen with apple logo over and over again on a loop.
    I have tried holding the top and front button together, this didn't work. I have also tried connecting to my laptop and following the reboot steps that I found on another discussion forum. Neither worked for me. The phone just won't reboot and it keeps continuing to loop the apple logo screen over and over without me touching anything.
    The iPhone won't even connect to itunes and so itunes seems to not recognise my phone because its not even turning on (just continually apple logo screen appears for 5 seconds, goes to black screen and then repeats).
    I don't know what is happening to it! Can anyone help? Is it a fault with the hardware or have I dont something to it? The next appointment at the genius bar for me is monday so I'm going to keep looking for any more recent ones until then but I really need to get it sorted before then so if anyone can help that would be great!
    Thanks

    Try a reset when your iPhone is plugged into the charger as you say it does not respond when not plugged in...
    Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release.  This may take up to 10 seconds.  This is the equivalent of a re-boot and you will not lose any data.
    See if it will charge after this.

  • My iphone 5 won't turn on or charge

    My Iphone 5 won't turn on or charge. I've tried 3 different chargers, a reset but still nothing. Any ideas or tips?

    Hi there Betty Boop 64,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W.

Maybe you are looking for

  • Can I append the text in JEditorPane?

    Hi, I can do append text into JTextArea e.g. textarea.append(string); but in JEditorPane, it only support setText() setText() will replace the existing text with the new text but not appended. Any ideas? thanks.

  • WAP4410N-E V02 not reachable after FW Upgrade

    Hello Everyone, I had some issues with our Accesspoints and decided to update the Firmware as it's discussed in several posts here in the forum. Unfortunately this update from 2.0.4.2 to 2.0.6.1 was crashing the accesspoint eventually. So here's what

  • Dynamically generating excel files

    Hi all, Is there a way to dynamically generate an excel file with the given content? By dynamically i mean not physically creating an excel on the system.

  • Number of Frames in Animation?

      Hello! I was just wondering if there was anyway to figure out how many frames you have in an animation? Thank you if someone can tell me.

  • "Insufficient disk space" to upgrade Aperture library to v.3

    I'm getting an "Insufficient disk space" and then an "upgrade failed" error when launching Aperture 3 with my old Aperture 2 library, hoping to upgrade it. My Aperture 2 library is 85.94 GB, and I have 15.31 GB free on my 250 GB disk. Does anyone kno