My Cyberlink Youcam doesnt work !!

hello,
I have hP dv7 Pavillion laptop
Windows 7
64-bit service pac.1
for some reason the webcam that is already build in does not work at all suddenly one day.
I tried skape, youcam, device manager to update, uploadm reload, disabled, install new drivers and it is still not working. Could anyone help me with this please? im begging you
and it says camera no detected

Or check these help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01896811&cc=us&dlc=en&lc=en
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01414839&cc=us&dlc=en&lc=en
*** Say 'Thanks' with Kudos ***

Similar Messages

Cyberlink YouCam not working

Hi Everyone, I am facing a issue with my webcam software "Cyberlink YouCam" in my HP Pavilion G6 laptop. An alert message saying "You do not have the compatible VGA hardware or driver to run cyberlink YouCam". Please suggest a solution for same. Also let me know if any details are reqd about the laptop. Thanks in advance.

Hello @maumita_b,
Welcome to the HP Forums.
I see that you're having issue with the youcam software. I will try to assist you with this.
Start by uninstalling and reinstalling the software. There is a chance that something's just error'd and this will correct it.
If it does not, make sure that all Windows updates have completed. Then use the HP Support Assistant to check for driver updates.
If you need further assistance after that please provide the following:
Currently install operating system.
Model and product numbers.
Let me know how this goes.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

CyberLink Youcam Dont work..

Model:15-ro17dx ......When i first brought this it worked for like 1 day..Now it wont work..I deleted stuff in the imaging device..I redownloadedd CyberLink youcam and it keep saying...No webcam detected.I tried everything all the thing i can find on this website.And the recovery won't work..I don't know how to make it work now..In Imagining device it only have HP truevision and the USB Video Device..I want help asap...I've been research for like 1 month..and find the answer...I tried redownloading and troubleshooting..It won't work.

@Runeeeee ,
Thank you for posting and welcome to the HP support forum. Lets see what we can do with your web cam issue here.
First thing though when posting could you please provide your systems key information. Here are some links that will help you.
Model and Product number.
Which Operating System am I running?
Once I have this information I will be better suited to help you with this issue.
Please post back soon and thank you again for posting.
Have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

My cyberlink youcam wont work on my new laptop. it says my vga hardware is not compatable. help!

I got a new HP g6 laptop and when I try to use CyberLink youcam it says it cannot operate because my VGA driver or hardware is not compatable. How do I fix this? Thanks

The phone is locked to another provider. You will have to contact the provider to which the phone is locked to get the device unlocked. The seller may have told you that the phone would work with T-Mobile because the phone is GSM and has a SIM slot. That does nothing if the phone is locked to another provider. You may also have been scammed.

HP Pavilion 23-b320 All-in-One Desktop PC unable to use cyberlink youcam with skype

I can not get Cyberlink YouCam to work with Skype.. CyberLink software has been registered and upgraded.

Hi,
For the issue of your CyberLink You Cam not working with Skype. To confirm is the WebCam able to work with other program? I have also included two documents for you. The first one is 'How do I use CyberLink YouCam with my Skype?'. This will make sure that the settings are correct. The second one is a thread on the Skype forum with some excellent troubleshooting 'CyberLink YouCam'.
Please let me know if this helps, thank you.
I worked on behalf of HP

My built-in webcam is not being detected by CyberLink Youcam on Windows 7 (HP Pavilion dv2660se)

Hi, I bought this laptop from someone I know, and Windows 7 came with it. I must say I don't know much about electronics. The built-in webcam won't work, either on CyberLink YouCam or on MSN Messenger. On CyberLink Youcam, it says no webcam is detected. In the control panel it doesn't even say there's a webcam, but there's an 'unknown peripheric' though. What can I do? P.S.: Please forgive english mistakes if there's any.

Hi I have exactly the same problem. My webcam was working for months but I recently had the laptop sent for repairs for something else, and I've just noticed since having it back that the webcam isn't detected. When going into the webcam program it says there is no webcam detected and for integrated cameras, make sure it is switched on. I've also had an unknown USB device notification flashing up but when I investigate in Device Manager I have in 'Sound, video and game controllers' Cyberlink Youcam virtual driver installed and 'functioning properly' Also in USB devices there is a usb not functioning properly "Universal Serial Bus Controllers / (Standard USB Host controller) / Port_#0002.Hub_#0003" and 'no drivers have been loaded for this device'. It's unknown but when I choose to search manually for driver updates the path it directs me to is C:\Program Files (x86)\Realtek\NICDRV_8169\win7 'Windows has stopped this device as it has reported problems (Code 43)' Does anyone know what I might be able to do? I've tried reinstalling the Webcam driver but apparent from that I don't really know where to go.... Thanks

My built-in webcam is not being detected by CyberLink Youcam

My built-in webcam is not being detected by CyberLink Youcam (webcam) Pavilion dv6-6c10us

Hello,
I see that you're having an issue with the webcam in the notebook. If you could, please check and see if the webcam is listed in the device manager. If you don't know how to check for that, you can follow step 1.
Now, if you can't seem to find it listed in the device manager it could be that the webcam may have become unplugged internally and requires service. It could be a faulty webcam module which is not been recognized. I suspect you might have to send the Notebook in for a warranty repair to get it fixed. Now, if that's the case after following the steps below you will need to call HP@8004746836 and see what options they have to replace or repair the notebook.
Also, you can follow these steps to try and resolve the issue.
Steps:
Please follow this document which will guide you through a couple of steps on how to resolve this issue you're having.
The document should something like this:
First, try this steps that's circled.
If the first steps doesn't seem to resolve the issue go ahead and follow the next step below.
The first section "Video does not appear in your webcam software (such as YouCam, Skype, Messenger, etc.)" will guide you through a couple of trouble shooting steps to get the webcam to work within these programs.
If the first step doesn't resolve the issue please go to step #2 "Reinstalling the original webcam program that came with your computer”. This section will guide you through recovering the webcam software and drivers. This is the most important steps in the document if nothing before this resolves the issue.
It should look something like this:
Once you have finished both steps please let me know the outcome. If you have any more questions please ask.
THX

Cyberlink YouCam errors out

cannot get the internal web cam to work.
looking at your awful help site it suggested that i download and use cyberlink youcam,
i installed it as per your suggestion then once the installation was completed and i go to use the internal web cam
a pop up box appears.
in the message was a red circle with a white "X" in the middle. the error message reads
"The procedure entry point ?EnableOnlyNumericalChar@CGED@@QAEXHAB_10@Z could not be located in the dynamic link library CtlFactory.dll"
in the end i still do not have use of my webcam and your help site is still the worst in the industry.

Hi @steven_Brock ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
When posting it is most helpful to us if you include your exact model and the Operating System you are running to enable to assist more effectively.
How Do I Find My Model Number or Product Number?
I grasp you are unable to use your Webcam. After perusing the forum you downloaded and installed the Cyberlink YouCam Software. When you tried to open it you received this error "The procedure entry point ?EnableOnlyNumericalChar@CGED@@QAEXHAB_10@Z could not be located in the dynamic link library CtlFactory.dll" when you open the Cyberlink YouCam software. .
If you had a previous installation of the software did you uninstall it before installing from the download?
Try this step.
Go to the command prompt
Right click on it and run as administrator
Type sfc /scannow and press enter.
This will try to locate and repair any corrupted files.
Have you tried running The HP Support Assistant to aid with resolving issue and updating HP software.
Is there any marks on the WebCam in Device Manager?
If you connect an external WebCam does it work?
Was there any changes or updates made just before this occurred?
Have you tried doing a restore back to before this happened?
If you would like further assistance, please provide your model and the Operating System you are running.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Ideapad U310 Windows 7 64bit, YouCam not working

I have a 1.5yr old Ideapad U310, Win 7 64 bit with inbuilt webcam. The camera is not working and cant be swiched on.
Neither thru YouCam software or through Skype. Was weoring perfectly a month ago.
The Product shown in the the Device manager under Imaging Device "Lexmark X422" WITH AN EXclamation mark.
There is a youCam software which doesnt work as says switch on camera. Fn F9 done the camera is still not ON but icon says on. Reinstalled the Youcam software twice, but issue remains "Camera to be switched on".
Please advise.

hi vtrakroo,
The Lexmark X422 that you're seing is likely the scanner from your Lexmark printer (the built-in camera should usually be listed as Lenovo Easy Camera or similar)
- Sample image
Things that you can try:
1. Boot into the BIOS by pressing F2 (or Fn+F2). In the BIOS, press F9 (or Fn+F9) to load setup defaults then press F10 (or Fn+F10) to save and exit.
- this procedure will refresh all hardware components in the system
2. Inside Windows, check if you have an Unknown Device in the Other Devices section. If you have this, follow this guide on how to identify the device (or post the Hardware ID here)
- Sample image
3. Reinstall the camera driver
- Camera Driver (Bison, Chicony, Awazu) for Microsoft Windows 7 (32-bit, 64-bit)
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

When I attempt to start my CyberLink YouCam, I get the error message that it cannot find a webcam

When I attempt to start my CyberLink YouCam, I get the error message that it cannot find a webcam or that I need to make sure my webcam is turned on. I see nothing in my documentation about how to turn on the webcam which is included with my laptop. How can I successfully turn it on and use the CyberLink YouCam?
HP Pavilion dv7-6b63us
Window 7 64-bit

Hi
Testing a Webcam Using YouCam
Testing a Webcam Using QuickPlay
Testing a Webcam using Your Favorite Instant Messenger
Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the Webcam driver and install it then restart the unit.
Fixing Webcam Problems in Windows
Incase you have the same issue please contact HP Technical support and get the Webcam replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Skype & YouCam - not working together

So I boguth new PC with win8.1
I have installed skype 7.5.0.102 and I was traying to run it with Cyberlink YouCam but I can't..
Of course if I close YouCam - skype camera works fine...
How to fix it?

Hi Kbee,
Thanks for the reply and sorry for the late response.
As you have mentioned that the webcam is not detected in device manager.
As the camera might be faulty this needs to replaced, please visit the nearest service center for further details.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure
they will be a great help.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Cyberlink YouCam Software update is 'hanging''

Hi,
Today, HP automatically downloaded and installed "Cyberlink MediaSuite10-desktop" onto my laptop and everything went without a hitch.
It then immediastey downloaded Cyberlink YouCam Software OK but the "installation" appears to have hung for the last 40 minutes or so.
In the Task Manager, a "Windows Modules Installer Working" process alternates between fairly intense CPU activity and Disk activity.
I'll give it a while longer, but is there any way of interrupting this apparently failed installation without causing problems? If so, how do I go about trying to install Cyberlink YouCam Software again - or will the HP software try again of itys own accord?
I've only had the laptop a couple of weeks and don't know much about anything.
John Latter
This question was solved.
View Solution.

The second installation went OK.
This time I watched what was happening:
When the download was complete, the actual attempt at installation was indicated by two spinning cogs - something I missed the first time so that I thought the failed icon (a cross in place of a green tick) meant the program had hung.
Basically, I panicked for nothing - oops!

CyberLink YouCam problems

Okay, so i have the Hp 2000 and the app CyberLink YouCam has come stock on this computer, however it has stopped letting me acces it through all cites and the app itself, it says that it is being used by another app. i force stopped it and everything. is there anything i can do, another app i can download or anything? i like to use omegle and that is the cite it has ceased to work on. PLEASE HELP.

Hi Mclumpkins, welcome to the HP Forums. I understand you are unable to use your Webcam. What is the model or product number? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Cyberlink YouCam Laggy?

I have the HP 2000 Laptop and I hadn't had any problems since I bought it, but not so long ago I was using the CyberLink YouCam program to make a funny video with my friends and since then the cam has been laggy, not only while using the app but also in other apps like Skype, etc. I'm pretty sure none of them touched anything strange on the Cyberlink app but the laggy webcam is the worst. Do I have to upgrade my app, or fix something in the settings, or anything else? Thank you!

Hello NatGC14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your webcam is laggy and you are looking for assistance to fix it. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
I am also including a Microsoft Support document: How to perform a clean boot in Windows, that I would suggest you follow and see if the issue persists after a clean boot.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Compaq Cyberlink Youcam driver

Hi guys.
I have a Compaq Presario CQ60-405EI. I have not been able to use the webcam since I bought my PC! I have downloaded the Cyberlink Youcam software but still my webcam is not wroking. The Imaging Device is not listed on the Device manager and I have tried to search for the Youcam driver from the hp website but it is not available. Where can I download the driver?
PLEASE HELP. Im in a foreign country and I need to skype with my fiance!!

Hi @BharathKrishna ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq 15 s105TU Notebook and issues with the WebCam not working correctly. Here is a document on WebCam troubleshooting.
If that does not help I would uninstall the Cyberlink and the MediaSmart software completely and reinstall the software.
The CyberLink YouCam Software should be installed.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My Cyberlink Youcam doesnt work !!

Similar Messages

Maybe you are looking for