My d530 SFF, wont complete AC'97 audio driver installati​on. It Shuts down without warning.

I recently formatted my "hp compaq d530 sff" and installed XP sp3. Everything works fine except that there's no Sound from the Machine. When I try to install the AC'97 sound driver the machine shuts down just as it is about to complete the install. It then restarts itself still with no sound. what could be the problem?

Back up all data immediately as your boot drive may be failing.
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Similar Messages

  • Macbook pro wont shut down without holding the power button nor cycle for updates to restart.

    macbook pro wont shut down without holding the power button nor cycle for updates to restart

    Sorry I said sorta wrong. I can shut down and I can update to the point of restart but it just sat for 45 minutes after an update. It goes through the update and to restart then the bars chase each other in a circle and it never restarts. So I hit the power button and go through normal reboot but loosing the update in the process. It does not matter how long I wait for a natural reboot after an update or click to restart it will chase the little bar in circles all day literally and never reboot.

  • HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

  • G510 audio driver installati​on problem on Windows 8.1

    I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.
    Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.
    Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
    The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.
    How can I say which audio chipset is installed and install the correct driver?
    Solved!
    Go to Solution.

    hi mikolajek,
    Welcome to Lenovo Community Forums!
    Under Device manager
      You should look for your Audio
    Normally it stays under Sound and gaming controller,
       And if no driver is installed in shows as High Definition Audio
    Right click on it and select Properties
         Go to the Details TAB
    change the Value to Hardware ID then check the details
    ex. PCI\VEN_14E4&DEV_4727&SUBSYS_051014E4&REV_01 
    Get the 4 digit after VEN and DEV
    Ven is the Vendor and Devi is the Device
    Go to PCI database and do a search for the VEN
    Then search for the DEV and youll know that device
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I have windows7 and my ipad2 completes only 1 or 2 steps and then shuts down with completely syncing

    When I connect my iPad2 to my computer (Windows7) and open iTunes to sync, it completes only a couple of syncing steps before I receive a windows error message and it shuts down.  This does not happen when I connect my iPod to my computer, open iTunes and sync.  Both the IPad2 and Ipod2 have the same music, photos etc.  Is this like to be an iTunes problem, or iPad problem, and if so, is there a program I can download to allow a complete sync?
    Regards
    Jane

    If the error message contains a number read here >  iOS: Resolving update and restore alert messages
    Your anti virus softare and Firewall could be preventing the sync process.
    Read here >  iTunes for Windows: Troubleshooting security software issues

  • IPod 5.5G Video, 30GB, No Sound Audio, Play/Pause Won't Shut Down, etc.

    Even though I have marked this topic as a question, it is more of a heads up for those having problems with Sound and Audio on the 5th Gen (Video) iPods.
    I was having audio problems like many others are describing and took it upon myself to look into the cause. I found that there is a problem with a flat ribbon cable that connects to the main board of the iPod. The issue is that there are very thin, gold plated traces of copper on a somewhat thin plastic backing which fits into a ZIF (i.e. Zero-Insertion-Force) connector.
    At issue is the amount of bending of the plastic cable when a clip on this ZIF connector is 'locked'. It seems that on some of these plastic ribbon cables, these small gold plated copper traces will crack and break, causing sound to come only from one channel or the other, or for scratchy sound, and even possible problems with the Hold switch. (I removed my Hold/Headphone Jack cable assembly and confirmed this under a microscope.)
    I don't know if the cracking is immediate upon the connector being locked, or if there is some length of time before cracking will occur. I also cannot say if this is truly a problem with the ZIF connector force, or the copper on the ribbon cable. There are different problems if the copper is too thin or too thick. Other problems can cause the copper to break, have problems adhering to the plastic 'ribbon', etc.
    Since this cable not only includes Left/Right Audio, but the Hold switch, units with this problem may not only have audio problems, but apparently have problem with the Hold switch not functioning properly and issues with Holding down the Play/Pause part of the Click-Wheel to power down an iPod. Another issue appears to be that the 'Clicking' noise of the Click-Wheel either becomes quiet or disappears altogether.
    Ok, here's the question part...
    Apple, do you have any knowledge of this issue? Is it systemic, or just several isolated units? Since the 5.5G is not in production, is it out of the question to hope to get a discounted repair or replacement part? What would your typical response be?
    (Note: I had an AppleCare contract that apparently doesn't run out until October of this year, but because I took it upon myself to open the unit I understand that this is now voided.)
    At this point I am thinking of buying a replacement Hold/Audio ribbon cable to install myself, but am very concerned that the part I purchase may also have these issues.
    Sincerely,
    Nobuo

    After all my worry, concern, and consternation, I took my own advice and went to see the Genius Bar at the local Apple store this afternoon on my way home from work, just to see if they knew about this issue. At least I was expecting they would tell me I was out of luck for opening the iPod, at most I thought they would take it in for service and then let me know they found I had opened it and that I'd have to either pay for service, buy a new one, or that they'd simply be returning it as is. Instead they offered to replace my iPod.
    I don't know if this was because I was starting to make other customers nervous (talking loud is a habit when I get anxious), and they said they don't work in individual parts like the flex ribbon cable which I told them in detail was defective - I even mentioned that I had tried to fix it by applying solder to fill in the breaks in the gold traces. But after 20 minutes of them listening to me and continually offering to exchange the iPod (not one, but two Genius' at the Genius Bar were offering me an exchange) - I gave in.
    I have to say parting with it was a bit of an emotional thing - I still had all my podcasts, songs, photos, etc, on the iPod (I would have wiped it, but I really didn't expect much - I don't know what I was expecting). Maybe I was thinking of all the Smart Playlists I would loose (again), and have to recreate (again), or maybe it wasn't wanting to part with it because I figured it would be my mod-ing unit (I had seen what some did to add 32GB Compact Flash to their iPods and was tempted to do this myself). It was a very lonely 30 min drive back home.
    I am still a bit gob-smacked with a 'New' 5.5Gen Video iPod. Part of me wants to thank Apple, and part of me wants to cry at loosing an old friend. (And I am sure there is a part that is sad that it wasn't me that fixed it.) I was also pretty well put in my place by the Genius when she said not to open the replacement. (If you've ever seen those TV shows where the actor becomes smaller and smaller when being scolded, that was me in the store.)
    The moral of my story is - *do not hesitate to take your product to Apple if you think it needs to be fixed!* It all definitely made me feel like Apple employees really do understand the value of 'Customer Service', even when the customer isn't always right. I hope others will learn from my mistakes.
    Sincerely,
    Nobuo

  • Can I do a complete recovery of hard drive recovery and everything t over without an external drive if I don't care to save anythingcm

    having bad permission problems and just seems easier to start over can I do it without an external hard drive as long I'm not saving information

    I have dozen OWC cases and drives and no issue so I know that they are good choice.
    Don't know how much data and such and given the price of 1-2-3TB drives $160 for 1TB might be small but get the job done, while 3TB for $230 is a good drive + case investment to handle your needs and nice combo TimeMachien and other purposes - for external solution which you do want, so it can be safe and off line etc
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    I keep a Voyager Dock around to access various bare drives externally as need, they do get warm under heavier use but work well
    http://eshop.macsales.com/shop/NewerTech/Voyager/Hard_Drive_Dock
    Good value in a bare drive
    http://eshop.macsales.com/item/Seagate/ST3000DM001R/
    Popular WD Black 2TB for all uses
    http://eshop.macsales.com/item/Western%20Digital/WD2002FAEXR/
    For my own systems. SSD for system with spare 10K 250GB WD drives ($100 for either), WD Black 1TB for data and 1-1.5TB Green for backups.
    WD Black 1TB $93
    http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B0036Q7MV0/
    WD Green 3TB $149 - backup
    http://www.amazon.com/Western-Digital-Caviar-Green-Desktop/dp/B004RORMF6/
    WD VR 10K 250GB $103 200MB/sec boot drive :
    http://www.amazon.com/gp/product/B007V5A1BK/
    Those last and last and make a nice boot drive.
    SSD: Samsung 840 128GB
    http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/

  • No audio in/out after force shut-down

    I am running snow leopard at my macbook pro (2.4Ghz intel core 2 duo, 2GB memory), when the "force shut-down" window pop up. After restart, the speaker keep out of function, the display on the menu bar shows normal but no physical sound plays. All else is fine. confusing! Please help!
    appreciate.
    c.junxing

    Start off with a flashing question mark appears when you start your Mac and then if you are still getting no where, run the Apple Hardware Test.

  • After updating to latest firefox computer on internet running slower,taking longer to go to links and sites.also if i click on an email link the link keeps refreshing as mailto and wont stop opening new tabs very quickly,have to shut down to stop it.

    since installing latest update,when using internet,email everything has slowed down and is taking long to go to websites to upload pictures to emails.
    also when i click on an email link to send email the tab bar keeps refreshing and opening a new tab very quickly all i can read cos its going so fast is mailto this has happened several times on various websites,i clicked on a email us link on grangerhertzog.com yesterday and it did it.

    You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
    *https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows

  • Windows XP compatible Audio Driver for C770TU laptop

    Hi i m using XP for my operations compatiblity, but my laptop wont have a compatible audio driver for XP. Thank full if got a proper audio driver for my laptop compatible with Windows XP...

    Hi,
    Before Conexant Universal Audio Architecture (UAA) here
    Conexant High Definition Audio Drivers here
    This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
    Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
    Open the Device Manager:
    1. Click on Start and select Run. Now type devmgmt.msc and press enter.
    2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
    3. Select "Install from a list or specific location"
    4. Click Next. Then select "Don't search, I will choose the driver to install"
    5. Click Next and then select "Sound, video and game controller" from the list.
    6. Click Next and then click Have Disk.
    7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
    Similarly install Modem Drivers:
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • My iTunes wont close and is preventing my laptop from shutting down

    I plugged out my iPod touch when iTunes was asking me whether I wanted an update or not, and now iTunes wont close and has frozen, preventing my laptop from shutting down. I have intel Celeron inside and Windows 7.

    Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to  > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook

  • Pavilion randomly shutting down completely unless plugged in.

    My laptop will randomly shut off while I'm using it. It just started happening I have this computer for almost 3 years now and all of a sudden now it will randomly turn off. The only time it won't is when it is plugged in. It says I have complete battery and yet it will shut completly down without warning and randomly. I need help, I've tried cleaning the vents and that didn't seem to help.

    Ctrujillo32 wrote:
    My laptop will randomly shut off while I'm using it. It just started happening I have this computer for almost 3 years now and all of a sudden now it will randomly turn off. The only time it won't is when it is plugged in. It says I have complete battery and yet it will shut completly down without warning and randomly. I need help, I've tried cleaning the vents and that didn't seem to help.
    If the notebook only shuts down when using battery power, then the problem is either the battery (most likely) or the battery controller in the notebook (less likely). 
    Open the HP Support Assistant and run the Battery Check utility.   Post your results here.
    I would also suggest power cycling (remove the battery & power cord and let sit w/o power for a minute) the unit and performing an HP BIOS update (can be downloaded from your notebook Support & Drivers page).

  • A500-ST6622 shuts off (completely dies) without warning

    My Satellite A500-ST6622 purchased in Nov. 2009, running Windows 7 with all updates, has run flawlessly until a few days ago.  Twice in the last three days while using the laptop, which was plugged into the AC outlet (it is plugged in 100% of the time), the computer instantly and completely shut off without warning.  It does not shut down or crash, but completely dies as if the power source were instantly removed.
    The first time it happened I tried to restart the computer by pressing the power button but the unit again went dead (completely shut off) during boot up.  Next I disconnected the the AC power adapter, removed the battery briefly, reinserted the battery and booted up the computer without a problem.  The computer operated without problems for three days, then went dead again. 
    Any idea what would cause this?
    Thanks for any assistance.
    Greg Tomerlin
    Lebanon, TN

    Thats like a old issue. happens on quite a few Satellite models. Happened to mien too. Sent mine in for repair many times and always came back with the problem reappearing after one or more days. Taking a month to "repair" each time, my labtop warrenty ran out and its stuck with this same stupid issue. (I also had to send it in a few times because of Toshiba's failture to reseat everything(like the cd drive and usb ports) properly so that wasted more time). Toshiba has never sovled this issue and its a pain in the buttk. Dont' think Toshiba can even fix it either. Eventually you won't be able to turn on your computer(shuts off doring POST). The problem worsens over time and Toshiba can't fix it.  I'd say I barely got ot use my labtop for like 90 days out of the whole year of warrenty. Hardware Failure is a common problem in Toshiba Satellite computers

  • Multimedia audio controller hp compaq d530 sff desktop pc

    Been trying for the past 2 days to find this driver. So here is the page that I keep getting sent to:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=473241&spf_p....
    As you can see there is every driver BUT the multimedia audio controller driver that is the last one still missing. Clean install win XP professional. Spent 6 hours finding the VGA driver and finally got one that works. Spent 8 hours looking for this driver. Still no luck.Thanks again for nothing HP.
    Other pages have "solved" links that lead to HP pages that say. "No support for this product"   lol You are joking, right?

    Here is the link to the audio driver you need.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=473237&spf...

  • My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

    My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

    Hey Hype.Beast.187,
    Here are some troubleshooting steps for not being able to hear sound through your iPhone speakers. I'd pay special attention to steps 8, 9, and 10 in your situation:
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    All the best,
    David

Maybe you are looking for