My DAQ wont start, and I dont understand why?
Hello,
I'm writing software for a lab that I'm working in and I'm having a little trouble with a section of my code dealing with myDAQ. The goal is to use this DAQ to activate a minishaker device. Everything was working well but to fix a timing issue I changed the set up of the loop running myDAQ, and I'm wondering why my device no longer works. I've tested it using another program that controlls the device and it works on that so its not a hardware issue. I've attached the section of my code that isnt functioning and I would really appreciate any pointers you can give me. (I kudos frequently)
"There will be water if God wills it"
Attachments:
test.zip 21 KB
Ah... I found my problem. No need to respond if anyone sees this.
"There will be water if God wills it"
Similar Messages
-
I need help to be able to see if I can fix this or something.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT203128 my ipod wont start and make noise inside why?
my ipod classic shows -is ok to disconect only- why?
Hello 11zachs,
I'm sorry to hear you are having these issues with your iPod classic. If your iPod isn't responding or starting up successfully, you may find the information and troubleshooting steps outlined in the following articles helpful:
iPod: No power or frozen - Apple Support
Restoring iPod to factory settings - Apple Support
Sincerely,
- Brenden -
for ex:
i go into family feud and when i sign into facebook it have a different language.. and my default is english .
it does that to every app i have.. and sometimes my browser is a diff language..knowing my ipod is englishunited state of america. new york city and app store the one that came with the ipod touch
-
I downloaded a tv episode and i dont understand why the audio is cracking. How do i fix?
Bought a tv episode and it is cracking. How do i fix it?
Try deleting the FB app and reinstalling it. That seems to have fixed the problem for me.
-
Need help my window is in thai and i dont understand at all.how to convert to english?
need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?
Try here:
iTunes: Error 13019 during sync
Not updating the iOS should not effect your problem.
As long as all the apps are in the iTunes library, you will not lose app data by updating the iOS. -
When I click on apps in Creative Cloud (via taskbar icon) it shows only Photoshop CC as installed and Lightroom as something to be installed! I already have LR 5.7 installed and this has been updated through CC. I dont understand why it's now showing as it needs to be installed!?!? It wasn't like this the last time I looked.
Hi,
Please refer to the help document:
Apps panel doesn't show installed Creative Cloud apps
Regards,
Sheena -
My ipod wont start and itunes wont recodnize it, what happened and how do i fix it?
I recently went to: settings, general, reset, and erase all data and settings, now my ipod wont start and itunes wont recodnize it, what happened and how do i fix it?
- After being connected to a charging source for half an hour, reset the iPod and then connect to your computer and it if appears in iTunes restore the iPod via iTunes.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Hi, my iphone was stolen around a month ago. After the phone popped up on find my iphone in central london the police decided to be really helpful and instead going to get it they closed my case. Since then it has been offline because the "lovely" individual who stole it obviously reset it. I was just wondering why doesnt apple track phones through the IMEI number. The number stays the same, so if the phone connects to the network they should be able to know that its my stolen iphone. I just dont understand why they dont do that. They have a huge ecosystem, and if someone signs in to my iphone with their itunes account (which they pretty much have to in order to use most of the phones features) the IMEI number gets associated with that perticular account. Would it not be possible for them to realize that its my stolen phone?
Thanks to anyone that answers.Your carrier can lock the IMEI number, try contacting them. At least you'll have the satifsaction of knowing the theif can't use it anymore. My guess is Apple doesn't block IMEI numbers because they don't want someone selling a phone without record, and then reporting it stolen and causing problems that way. But that's just a guess, I feel for ya. Good luck either way, if it's a locked phone you should be able to call the carrier it's locked to and have the IMEI blocked.
-
i just installed icloud and i dont understand it. me and my sister share an itunes account and if i sync through icloud does it mean that my things will sync to her device?
No. She needs to setup her own iTunes account and purchase her own iTunes media.
-
I dont understand why my ipod says it has 8gb but holds 6.36gb capacity and it always says over capacity by 35.4mb and i deleted lots of my apps but it keeps doing the same thing soo annoying . ANYONE KNOWS WHY?!
I had a similar problem and after deleting endlessly...and weeks of frustration I (without even realizing what I was on to) deleted my text messages. I had been letting them add up since it seemed easier to text someone if it were readily available. Needless to say, I ended up with nearly double the space/memory available.
-
I downloaded two movies 4 days ago before a school trip. I watched the first on the bus on the way. I am now on the way home and want to watch the other movie and it disappeared. This has happened to me in the past and I dont understand the problem!!
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
Macbook wont start and makes ticking noise
The subject line says it all. My macbook wont start and it makes clicking noises from inside the case, kind of like a watch. The display turns on and the chime goes when it starts, but the screen stays white and nothing happens.
You can run diagnostics from the OSX disc. Insert disc one and while it is booting hold down the d key. This should take you into diagnostics.
You might also try to reset PRAM AND PMU first.
SMC/PMU Reset
http://docs.info.apple.com/article.html?artnum=303319
PRAM Reset
http://docs.info.apple.com/article.html?artnum=2238
Mort -
Invalid cursor. dont understand why
i keep getting invalid cursor near the fetch. i dont understand why. appreicate any help.
declare
-- Local variables here
o_errorcode NUMBER;
o_errortext VARCHAR2(1000);
i_CustomerLoop NBK.Pkgcommon.T_CUSTOMERLOOPTYPE;
o_loopid number;
FUNCTION createCustomerLoopObj(in_Loopid IN NUMBER,
inTestCAse IN VARCHAR2)
RETURN NBK.Pkgcommon.T_CUSTOMERLOOPTYPE IS
J_CustomerLoop NBK.Pkgcommon.T_CUSTOMERLOOPTYPE;
co_clli open_interface.WDN_segment.co_clli%type;
termsysid open_interface.WDN_segment.termsysid%type;
cable open_interface.WDN_segment.cable%type;
pair open_interface.WDN_segment.low_pair%type;
v_cntLoops number := 0;
CURSOR v_CustomerLoops IS
select seg_f1.termsysid,
seg_f1.cable,
round((seg_f1.low_pair + seg_f1.high_pair) / 2),
seg_f1.co_clli
FROM open_interface.WDN_segment seg_f1,
open_interface.WDN_loop_segment_association assoc_f1,
open_interface.WDN_potential_loop_makeup loop_f1
where seg_f1.segment_id = assoc_f1.segment_id
and assoc_f1.loopid = loop_f1.loopid
and loop_f1.loopid = in_Loopid -- 44441549
order by assoc_f1.segment_number asc;
BEGIN
loop
fetch v_CustomerLoops
into termsysid, cable, pair, co_clli;
exit when v_CustomerLoops%notfound;
begin
v_cntLoops := v_cntLoops + 1;
J_CustomerLoop(v_cntLoops).Cable := cable;
J_CustomerLoop(v_cntLoops).Pair := pair;
J_CustomerLoop(v_cntLoops).CentralOfficeName := co_clli;
J_CustomerLoop(v_cntLoops).TerminalDeviceID := termsysid;
exception
WHEN no_data_found THEN
dbms_output.put_line('no data found loopid ' || in_Loopid ||
' TestCASE' || inTestCAse);
WHEN OTHERS THEN
dbms_output.put_line('OTHER ERROR loopid ' || in_Loopid || ' ' ||
SQLERRM || SQLCODE || 'TestCASE' ||
inTestCAse);
end;
end loop;
close v_CustomerLoops;
RETURN J_CustomerLoop;
end createCustomerLoopObj;
begin
i_CustomerLoop := createCustomerLoopObj(44441549, 'tc');
end;10 Points to you. ;)
Regards.
Satyaki De.
Maybe you are looking for
-
How to Construct the Email To activity in SharePoint 2013 Workflow
I have a created a custom workflow and custom association and initiation form using SharePoint 2013. My Assn. form is fine. I pass in the people picker (Active Directory group) value to my workflow just fine. Now on my Init form I use the passed in
-
I am trying to update my itunes on my pc. After the download in complete, there is an error message telling me that Apple Application Support needs to be installed for Itunes to work. What do I do?? I've already unistalled and install the download fo
-
How to Update a particular column with custom SQL in JHeadstart
Hi Friends, I was trying to keep an update SQL statement in VO (missing right Parenthesis exception is thrown) Please to let you know about my Requirement. I have a column in Sales_Person Table "TARGET' and in Sales_Admin Table "INCENTIVE" So Admin w
-
Had a software problem and took my powerbook to apple store where it was completely wiped clean and reinstalled all software ..... now when i open i photo the pictures wont open fully and remain unclear as if they are were taken with a 1 million pixe
-
My measures for my tabular model don't display the totals any more next to the measure.
In the lower measures grid in the Visual Studio IDE I no longer see my totals next to the measure itself. What caused them to go away and can I get them back?